Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Conemarra II bass stop slider  (Read 798 times)

0 Members and 1 Guest are viewing this topic.

martin p

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 408
Conemarra II bass stop slider
« on: April 23, 2024, 05:18:18 PM »

I need to obtain a replacement bass chords 3rds stop slider (i.e. the thin metal strip) for a Salterelle Conemarra II. Mine has snapped at the top where it screws onto the wooden block. Anybody have such an item and prepared to sell it. Salterelle can supply one, but they want silly money for it. I would also consider buying  the same model of box as salvage if anybody has one in a poor state of repair going cheap. I am based in UK.
Logged

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Conemarra II bass stop slider
« Reply #1 on: April 23, 2024, 06:46:31 PM »

I need to obtain a replacement bass chords 3rds stop slider (i.e. the thin metal strip) for a Salterelle Conemarra II. Mine has snapped at the top where it screws onto the wooden block. Anybody have such an item and prepared to sell it. Salterelle can supply one, but they want silly money for it. I would also consider buying  the same model of box as salvage if anybody has one in a poor state of repair going cheap. I am based in UK.

Martin,
if you are able to do an accurate CAD drawing, you can send it to any number of on-line laser cutting services, and they will make one for you for a sensible price. Not sure exactly how much, but under £50 I think.
Dave.
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

martin p

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 408
Re: Conemarra II bass stop slider
« Reply #2 on: April 23, 2024, 08:43:00 PM »

I wonder if it work 3D printed in plastic?
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Conemarra II bass stop slider
« Reply #3 on: April 23, 2024, 11:26:38 PM »

Carini sells all sizes and shapes of sliders, including the ones Saltarelle uses (guess where they get them from?)
Logged
C#/D player

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Conemarra II bass stop slider
« Reply #4 on: April 24, 2024, 01:28:40 AM »

I wonder if it work 3D printed in plastic?

Could work, but, given its already designed for a metal slide, most plastic filaments are probably going to buckle when being actuated for the thickness that would be appropriate (ie very thin). Best to do like for like/at least pretty similar.
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Conemarra II bass stop slider
« Reply #5 on: April 24, 2024, 07:17:18 AM »

If you could email a picture please I may be able to help

info@acorninstruments.co.uk


Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal