Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Pre-war Hohner mechs & pinned reeds overhaul  (Read 3828 times)

0 Members and 1 Guest are viewing this topic.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Pre-war Hohner mechs & pinned reeds overhaul
« on: April 25, 2024, 01:20:23 PM »

Hi all.

Any tips on overhauling reeds & treble mechs on a pre-war Hohner box?

Reeds: Are pinned to the blocks. Everything is very clean and the leather gasket seems fine, so I don't intend to replace it. The screws between reeds make sense, but what about these little brackets at the top of each reed? I can twist them aside to remove the reeds, but how do I ensure they are pressing the plates into the gasket when putting the reeds back in? I think they are just hammered into the wooden reedblock.

Mechs: both rows of pallets are reverse-mounted. Top row uses strips of green felt as a buffer between the key rod and the pallet rod. The bottom row seems to use bits of cardboard tube (?!). Any suggestions on what to replace them with?

Thank you.

PXL-20240417-164110450" border="0 PXL-20240425-120633650" border="0


Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #1 on: April 25, 2024, 01:41:07 PM »

You’re probably ok with the rotating reed brackets as they are, but the only way to really ensure a good tight fit at the top of the plate would be to replace those brackets with screws.
Logged
C#/D player

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #2 on: April 25, 2024, 01:50:23 PM »

I thought about that - any suggestions on what screws to use?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #3 on: April 25, 2024, 01:54:49 PM »


Reeds: Are pinned to the blocks. Everything is very clean and the leather gasket seems fine, so I don't intend to replace it. The screws between reeds make sense, but what about these little brackets at the top of each reed? I can twist them aside to remove the reeds, but how do I ensure they are pressing the plates into the gasket when putting the reeds back in? I think they are just hammered into the wooden reedblock.

If the pins feel loose they could be replaced with screws, if they feel firm and put up a little resistance to twisting then its sufficient to turn them back into place and press firmy into place with a block of hard wood.

Quote

Mechs: both rows of pallets are reverse-mounted. Top row uses strips of green felt as a buffer between the key rod and the pallet rod. The bottom row seems to use bits of cardboard tube (?!). Any suggestions on what to replace them with?


If the cardboard tubes are not not worn so that the two parts of the lever moves with minimal clearance then just leave them as they are.   Of they are worn, loose, or disintegrating it is possible to replace them with short lengths of silicone rubber tubing.  There is quite a bit of trial and error to find the right size tube that takes up the clearance, but doesn't lead to the mechanism binding.

The phot is not clear enough for me to understand how the felts work on the other row.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #4 on: April 25, 2024, 01:55:28 PM »

I thought about that - any suggestions on what screws to use?

Carini sell screws for that exact purpose that have slightly wider heads.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #5 on: April 25, 2024, 06:05:05 PM »

The 'brackets' can be twisted with a fine pin nosed plier and turned back. I wouldn't replace them.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #6 on: April 25, 2024, 06:07:39 PM »

The 'brackets' can be twisted with a fine pin nosed plier and turned back. I wouldn't replace them.

For what it’s worth, I’ve also never replaced them.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #7 on: April 25, 2024, 08:46:46 PM »

I'm really pleased this has come up. Saves me asking the question.
I have a box coming from Germany any minute now needing everything doing. LMMM so loads of reeds
Identifying the model will be the next thing
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #8 on: April 25, 2024, 10:25:50 PM »

Got any pics?

This one's a 235  8)
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #9 on: April 26, 2024, 07:59:42 AM »

Hasn't arrived yet.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #10 on: April 26, 2024, 12:46:49 PM »

A small clockmaker's hammer is good for tapping those bent pins to a state of firmness.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #11 on: April 26, 2024, 05:49:47 PM »

Thanks.

@Theo the felt is used as padding between the key rod & the pallet hook.
PXL-20240426-133732225" border="0

I got a bag of 2mm x 10mm wood screws in case these brackets pop out.


In regard to the cardboard bushings: How about a plastic rod in the right diameter, with a hole drilled down the middle? Or even a hollow brass rod?
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #12 on: May 05, 2024, 12:32:07 PM »

Got any pics?

This one's a 235  8)

Here you go. No idea of the model number
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #13 on: May 05, 2024, 12:33:26 PM »

And the reeds.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #14 on: May 05, 2024, 12:34:09 PM »

Treble end
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #15 on: May 05, 2024, 01:11:03 PM »

That's a 235 too. Yours is in Bb-Eb it seems while mine is C-F.
Lovely red colour!
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #16 on: May 05, 2024, 01:55:56 PM »

Has yours got 3 levers on the back of the keyboard?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #17 on: May 05, 2024, 02:59:52 PM »

Yes. M-M+, L and M0.
And a bellows lock - you've got it too (at least you have the mechs for it inside the box).

I also have a wee breast plate that raises the treble keyboard a bit - looks like a prototype that was later implemented on Morinos.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #18 on: May 05, 2024, 04:19:22 PM »

Are those Helicon basses, Pete? It's a smasher, is it a keeper for a decent player like yourself, one wonders?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Pre-war Hohner mechs & pinned reeds overhaul
« Reply #19 on: May 05, 2024, 04:52:30 PM »

Yep, "real" full-sized helikons. That's what I call "bass".
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal