Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Retuning D up to E  (Read 2784 times)

0 Members and 1 Guest are viewing this topic.

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Retuning D up to E
« on: April 30, 2024, 10:40:54 AM »

I've long been toying with the idea of changing the low push D on button 2 of my G row to an E (even going so far as taping off the D so I don't learn to rely on it, this hasn't caused me any problems). A chat with Archie Churchill-Moss at Melodeons in Wensleydale has encouraged me to finally pull the trigger on this (he's got a push E instead of a D too), but before I get a pro to make this change on my nice box, I'd quite like to test it out on the cheap old box I use for practicing tuning.

I know the general answer to "how far can you retune a reed" is "it depends", but in the case of tuning D4 reeds up a tone to E4, has anyone had any notable successes or failures? Or got any advice?

As a side note, I know that reeds can be tuned down by adding weight to the tip with solder, does that technique also work in reverse (i.e. adding solder to the base to tune a reed up)?

Thanks in advance for any help!
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Retuning D up to E
« Reply #1 on: April 30, 2024, 10:58:27 AM »

I think it really depends on the reed.
I had no problems shifting hohner artistes up by a tone, but hohners left the tips quite thick. I don't think I can push my bandoneon from A337 to a440 because the tips are so thin.

And no, you have to file the tip. Also possible to chisel the top of the frame to shorten the reed by 0.5mm or so. But it's borderline reed butchery and things can go wrong.

Fwiw I haven't put the re-tuned artistes into a box yet so don't know how long or how well they will play... But they look fine so should be fine.
« Last Edit: April 30, 2024, 11:00:41 AM by mChavez »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Retuning D up to E
« Reply #2 on: April 30, 2024, 12:46:28 PM »

I’ve  successfully done that D to E a few times by tuning the existing reeds up a tone.  The reeds are fairly big so there is plenty of metal available at the tip.

I’ve seen reeds with solder in the centre to raise the pitch.  It’s a bad idea because although it raises the pitch it deadens the sound so much as to make the reed pretty much useless.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Retuning D up to E
« Reply #3 on: April 30, 2024, 01:02:39 PM »

"I’ve seen reeds with solder in the centre to raise the pitch.  It’s a bad idea because although it raises the pitch it deadens the sound so much as to make the reed pretty much useless."

Very often the reeds will gradually go flat again anyway- maybe because the solder is on the part of the reed that flexes when played - so not worth doing even as a temporary fix.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Retuning D up to E
« Reply #4 on: April 30, 2024, 01:35:11 PM »

If you have access to some old PA reeds you could also consider keeping the existing reeds and replacing with an E/F#. You could butcher/retune a couple of pa reeds, so…select an F reed and tune it up and down a semitone, or choose an F# reed and flatten it a whole tone. And you get to retain your existing reeds.

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Retuning D up to E
« Reply #5 on: April 30, 2024, 03:31:28 PM »

Thanks everyone. I did suspect there was a reason not to weight the base of reeds to raise pitch, thanks for confirming.

Unfortunately I don't have any spare PA reeds lying about, and I'm struggling to find a supplier of small quantities of reeds (I'm sure there are loads of others who wish they'd stocked up on things from CGM while they had the chance!)

One of my worries with replacing the reeds is that the tone won't match the rest of the box, not essential on the cheap box, but would still be nice. Has anyone who's approached this by swapping reed plates notices any difference in tone/sound on those reeds?
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Retuning D up to E
« Reply #6 on: April 30, 2024, 04:01:36 PM »

I share your worries about getting replacement reeds to match the sound and response of the originals.  There is a huge range of different reed qualities in old accordions reeds. 
There’s really nothing to worry about with tuning up the original reeds.  It’s just removing weight from the tip. If you don’t get on with the push E you can tune it down again to D without detriment to the reed by replacing the removed material with a little solder.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Retuning D up to E
« Reply #7 on: May 01, 2024, 01:16:35 PM »

I wasn't prepared for just how much filing would be needed to go up a whole tone. I've just done 25 minutes of filing and only managed to go up 30 cents. Maybe that means I need a better file? The one I got from CGM in the tuning kit seemed way too fine, so I moved onto a slightly courser one which did help.

The bigger problem is that the reed is now buzzing, I suspect it's catching on the edge of the slot or there's some filing debris stuck. Does that mean there's something wrong with my filing technique? I assume so, but if anyone has any suggestions what I've done wrong and how to fix it, I'd be very grateful. In the meantime, I will wait until my magnifying glass arrives tomorrow so I can get a better look at exactly what's going on.
« Last Edit: May 01, 2024, 02:29:31 PM by Andy Goldfinch »
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Retuning D up to E
« Reply #8 on: May 01, 2024, 02:35:54 PM »

You definitely need a better quality file for that task.  When I do that same modification it takes me a couple of minutes.
The buzzing is likely to be a burr on the edge of the reed. Hold the tongue up and gently run a file against the edges.  If that doesn’t fix it the reed may have twisted slightly on its rivet.  Hold the reed up to the light and use a hand lens to check for an equal gap on ea ch side of the reed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Retuning D up to E
« Reply #9 on: May 01, 2024, 03:11:59 PM »

I used a 3-square saw sharpening file. Worked very well.

I really wouldn't learn filing straight on a good (TAM, AM) reed. Get some rubbish ones to practice on.
Filing the very tip raises the pitch, but filing the top 1/3 of the reed can lower it (you're making 1/3 or the reed looser). Filing a step will create a stress point, so there's a knack to finding the right final profile for the reed.

Also, if you file the tip too thin, the reed will get ruined and go into wah-wah mode, where the tip is so loose that it has a mind of its own and the pitch is extremely unstable.

If you don't hold the angle of the file, you're running the risk of filing a gulley across the reed, creating a stress point. Snap. If you angle the file towards the tip of the reed to avoid this, you might file the tip too thin.

Practice, practice, practice.

If it's machine-stamped reeds, then just get one in the right pitch. There's no shortage of low quality reeds.
« Last Edit: May 01, 2024, 03:14:58 PM by mChavez »
Logged

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Retuning D up to E
« Reply #10 on: May 01, 2024, 03:43:16 PM »

Thanks for the advice Theo & mChavez, I appreciate it.

I've looked through some other threads where tuning tools were discussed and ordered a Vallorbe needle file.

And no need to worry about me ruining nice reeds, this is the practice.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Retuning D up to E
« Reply #11 on: May 01, 2024, 04:43:16 PM »

I have a tri-square needle file from Vallorbe and it's not aggressive enough.
Saw file does it better, imho.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Retuning D up to E
« Reply #12 on: May 01, 2024, 05:18:12 PM »

Sometimes the reed buzzes and it seems impossible to trace where it's catching. I usually have a narrow strip of 'wet and dry' handy and drawing this through the gap helps centre the tongue while removing some of its burr.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Retuning D up to E
« Reply #13 on: May 01, 2024, 06:53:10 PM »

Filing to go up a whole tone should take no more than a few minutes of work with the proper file, btw.  I use a coarser file for this type of work than I would for fine-tuning. Any buzzing that may occur can easily be corrected with a few passes of the file along the edge as Theo has described.
« Last Edit: May 01, 2024, 07:00:34 PM by mselic »
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Retuning D up to E
« Reply #14 on: May 02, 2024, 02:35:42 PM »

Imagine tuning from 436 to 440Hz all the reeds in a 4 voice 41/120 pa… (:) ..which is 448 reeds. It seems a bit endless, I have to say. Flattening a 48key concertina (which is 96 reeds) doesn't seem quite so bad in comparison.  (:).

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Retuning D up to E
« Reply #15 on: May 07, 2024, 08:20:16 AM »

I really appreciate the help, thanks everyone. I've got the reed up to an E now (much easier with a decent file), and there's no noticeable difference in tone, volume or response, so I'm calling it a success! The buzzing was caused by the reed having rotated very slightly, which I diagnosed by shining a light up into the reed block, which made it much more obvious that the reed wasn't quite central.
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal