Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Possible to make a LM-voiced Preciosa?  (Read 2787 times)

0 Members and 1 Guest are viewing this topic.

Luke Hillman

  • MAD hatter
  • Good talker
  • **
  • Offline Offline
  • Posts: 77
  • Berkeley, CA
    • Anglo Piano
Possible to make a LM-voiced Preciosa?
« on: May 05, 2024, 04:02:47 AM »

One of these days, I plan to have a vintage Preciosa modified into a 12-bass instrument. I've got a Regina to supply the bass action and a layout I think will be almost perfect for my needs. What would really be amazing, though, is if it could also be bandoneon-voiced (edit for clarity: on the treble side). I know the reeds are mounted in an unusual way in these boxes, and I think they're sized a bit differently as well. Can anyone with experience tell me if this would be a possibility? If it helps, it'd be D/G tuning.
« Last Edit: May 06, 2024, 09:15:18 PM by Luke Hillman »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Possible to make a LM-voiced Preciosa?
« Reply #1 on: May 05, 2024, 09:30:36 AM »

I converted a Liliput to octave tuning a while back, also in D/G. It took a lot of reedblock modification, but worked champion. But I believe that the Preciosa is even smaller than the Liliput, so the gubbins would be a tighter fit, although I reckon it would still be possible.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Possible to make a LM-voiced Preciosa?
« Reply #2 on: May 05, 2024, 09:33:08 AM »

12 bass is doable if you have a spare mechanism to cannibalise.
The reedblocks are fiddly to make though.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Possible to make a LM-voiced Preciosa?
« Reply #3 on: May 06, 2024, 08:05:58 AM »

I have a D/G bandoneon-tuned Liliput (Octoput), converted by Mike Rowbotham. It works really well.
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

Luke Hillman

  • MAD hatter
  • Good talker
  • **
  • Offline Offline
  • Posts: 77
  • Berkeley, CA
    • Anglo Piano
Re: Possible to make a LM-voiced Preciosa?
« Reply #4 on: May 06, 2024, 09:12:45 PM »

Octoput! Love it.

I'm hopeful this is something that can be done, though the reeds in a Preciosa are mounted flat (not on traditional reed blocks), and I just don't know if there's enough room for the lower set, or what compromises would be involved, etc. It'll be a brilliant box either way, of course  :D
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Possible to make a LM-voiced Preciosa?
« Reply #5 on: May 11, 2024, 01:22:00 PM »

Octoput! Love it.

I'm hopeful this is something that can be done, though the reeds in a Preciosa are mounted flat (not on traditional reed blocks), and I just don't know if there's enough room for the lower set, or what compromises would be involved, etc. It'll be a brilliant box either way, of course  :D

I'd be really surprised if you could fit a low octave set of reeds in a Preciosa, they're absolutely *rammed* inside...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Possible to make a LM-voiced Preciosa?
« Reply #6 on: May 11, 2024, 01:51:27 PM »

Octoput! Love it.

I'm hopeful this is something that can be done, though the reeds in a Preciosa are mounted flat (not on traditional reed blocks), and I just don't know if there's enough room for the lower set, or what compromises would be involved, etc. It'll be a brilliant box either way, of course  :D

I'd be really surprised if you could fit a low octave set of reeds in a Preciosa, they're absolutely *rammed* inside...
Oh shit! I feel a challenge coming on.
I've got a sparkly gold CF jobbie just sitting looking at me - defying me.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Possible to make a LM-voiced Preciosa?
« Reply #7 on: May 11, 2024, 02:24:28 PM »

I think Ian is right. It’s the length of the reeds that is severely constrained on the Preciosa. The fixed bank of reeds has no room for increasing length so the L reed set would have to be on the removable reed layer.  There is some scope for longer reeds there.  It’s not a complicated structure do probably best to check if there is space and consider making a new one. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Possible to make a LM-voiced Preciosa?
« Reply #8 on: May 11, 2024, 04:46:36 PM »

"consider making a new one"

Theo is certainly spot-on with that suggestion. Chopping and changing the flying blocks would be an absolute nightmare!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Possible to make a LM-voiced Preciosa?
« Reply #9 on: May 11, 2024, 05:32:09 PM »

I'd just make new flying blocks. The length available is a M reed plus the air hole so about another 8mm or so.
As long as it doesn't foul the bellows
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Possible to make a LM-voiced Preciosa?
« Reply #10 on: May 11, 2024, 06:09:30 PM »

It's a lot of bother. You've really gotta want an LM box…and there are probably easier ways to achieve that.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Possible to make a LM-voiced Preciosa?
« Reply #11 on: May 11, 2024, 07:56:33 PM »

Rog, it's not that. It's that some strange folks just like to have something different, something that other people don't have, and something that they've struggled over themselves!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Possible to make a LM-voiced Preciosa?
« Reply #12 on: May 12, 2024, 11:29:10 AM »

I just had a measure up.
There's about 12mm clearance either side at the widest part of the flying block so that should take the longer reeds. The bellows closure mechanism takes up a fair bit of room in the middle so I'm guessing that will need to be altered.
Otherwise it looks reasonably doable.
Looking at the bass end however it's going to be very tight. The miniature reed sharing mechanism like a bigger club box takes up a lot more room than the Liliput which is set up like a pokerwork .
A little head scratching needed here......
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Possible to make a LM-voiced Preciosa?
« Reply #13 on: May 12, 2024, 04:18:24 PM »

I have a D/G Liliput with 12 basses and the fundamental bass notes are an octave lower than normal, I’m not sure if that makes them Helikon or not. Treble end is MM normal pitch though, I’d be interested to hear one of these small boxes with an LM set in the treble.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Possible to make a LM-voiced Preciosa?
« Reply #14 on: May 13, 2024, 12:40:29 AM »

I think that this may be my bandoneon tuned Liliput, but you'll have to forgive the playing.
 
https://www.youtube.com/watch?v=ZngdAqhrhew&ab_channel=ourluxor
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Luke Hillman

  • MAD hatter
  • Good talker
  • **
  • Offline Offline
  • Posts: 77
  • Berkeley, CA
    • Anglo Piano
Re: Possible to make a LM-voiced Preciosa?
« Reply #15 on: May 18, 2024, 03:37:49 AM »

There is some scope for longer reeds there.  It’s not a complicated structure do probably best to check if there is space and consider making a new one. 

I just had a measure up.
There's about 12mm clearance either side at the widest part of the flying block so that should take the longer reeds. The bellows closure mechanism takes up a fair bit of room in the middle so I'm guessing that will need to be altered.

Thanks Theo and Pete. I'm going to open up my A/D Preciosa and see if I can work up a design for a new flying block. Might be an excuse to play with a laser cutter.

It (the A/D I've currently got) actually has standard external bellows straps on it -- a recent Clapp modification, I think, possibly necessary after applying the thicker bellows tape. I'm planning to source a different box for this project and am curious to see the internal bellows lock.

Rog, it's not that. It's that some strange folks just like to have something different, something that other people don't have, and something that they've struggled over themselves!

Guilty as charged. That's a very nice bandoneon Lilliput you've got there!
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Possible to make a LM-voiced Preciosa?
« Reply #16 on: May 19, 2024, 03:25:54 AM »


It (the A/D I've currently got) actually has standard external bellows straps on it -- a recent Clapp modification, I think, possibly necessary after applying the thicker bellows tape.


Partly correct, Luke. However you may note that the bellows have a couple of folds less than normal, which were so badly damaged when I acquired it that I had to surgically remove them, and the internal bellows catch would no longer fit, despite the extra thickness of the new bellows tape which I had hoped would compensate, but didn't...  IMHO, the factory bellows of the Preciosa are too long anyway and which I find hard to control on these, so it was a win win result. I hope my "cut and shut" repair is holding up well.
Your Youtube video sounds great, and it was good to hear the Preciosa once again. I'm glad that you are not considering this one for your LM project; good luck with that, though I personally believe that the old saying about trying to put a quart into a pint pot is relevant...but YMMD.






 
« Last Edit: May 19, 2024, 02:11:04 PM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Luke Hillman

  • MAD hatter
  • Good talker
  • **
  • Offline Offline
  • Posts: 77
  • Berkeley, CA
    • Anglo Piano
Re: Possible to make a LM-voiced Preciosa?
« Reply #17 on: May 19, 2024, 04:26:03 AM »

Partly correct, Luke. However you may note that the bellows have a couple of folds less than normal, which were so badly damaged when I acquired it that I had to surgically remove them [...]

Hi Malcolm! Ah, right, I remember you saying so. This is the only Preciosa I've ever played, and the bellows seems to be perfectly sized IMO. It's holding up great, probably my favorite box. I especially love the push C chord, which I was initially expecting to want to re-tune to match the standard layout, but which turned out not to be an issue and in fact has opened up some fun possibilities.

I'm glad that you are not considering this one for your LM project; good luck with that, though I personally believe that the old saying about trying to put a quart into a pint pot is relevant...

This may just end up being an elaborate thought experiment; I love the LM sound, but with a low-G scale layout, I can ultimately live without it. I definitely won't change the A/D from its current configuration.

Your Youtube video sounds great;

Thank you!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal