Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 1040 age  (Read 1599 times)

0 Members and 1 Guest are viewing this topic.

Donal Hennigan

  • Member
  • *
  • Offline Offline
  • Posts: 7
Hohner 1040 age
« on: May 14, 2024, 08:24:07 PM »

Hi all. Just looking for an age on the 1040 attached. Looks a bit rough but the compression is excellent, a few valves replacing and a rewaxing needed. Is it silly to think about changing it from a G to a D?
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Hohner 1040 age
« Reply #1 on: May 14, 2024, 09:45:17 PM »

Hi all. Just looking for an age on the 1040 attached. Looks a bit rough but the compression is excellent, a few valves replacing and a rewaxing needed. Is it silly to think about changing it from a G to a D?

The wooden keyboard says it’s 1950s. I’ve thought about doing this modification myself but I realised it would be an awful lot of effort and you’d still need to source most of the reeds anyway. The main problem is the G key being an entire 5th lower than D, so to get the higher B/D, C#/F# reedplates found on a D one-row you’d have to find them elsewhere, as well as majorly retuning the lower reeds. And that’s before thinking about the left hand!..

But the 1040G does have a charm of its own. Lots of French Polkas fit nicely, and it does find some limited use in ITM (mainly limited by the fact it’s missing the high A note…)

https://m.youtube.com/watch?v=Baq9mb6D0q4&pp=ygUUaXJpc2ggbWVsb2Rlb24gbXVzaWM%3D
« Last Edit: May 14, 2024, 09:53:18 PM by Arnold »
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Hohner 1040 age
« Reply #2 on: May 16, 2024, 05:37:03 PM »

Hopefully someone with more expertise will chime in… But anyway, I needed to fix up a 1040G quickly for a specific performance of a musical. I carefully removed the curled leather valves with a craft knife and rolled them the other way before gluing back on with contact adhesive. Not the most responsive box but did the job… If you want to get the job done properly new valves would probably be the wisest option!.. Plastic seems most popular choice in general…
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 1040 age
« Reply #3 on: May 16, 2024, 05:42:38 PM »

My normal practice for valving old instruments is to use plastic from roughly button 4 to button 8 or 9, and composite leather/plastic in the 3 or 4 lowest  pitch.  You can use plastic throughout but you may have more valve noise on the big reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Frank Pallister

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: Hohner 1040 age
« Reply #4 on: May 18, 2024, 10:11:18 AM »

hi i upgraded my 1040G by fitting cagnoni tipo a mano D reeds  but it has not been played very much and would like to sell as part ot of reducing my collection of unplayed melodeons ! i am wanting £350 it comes in a stout wooden case and is in very good condition
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Hohner 1040 age
« Reply #5 on: May 18, 2024, 11:50:58 AM »

Hi all. Just looking for an age on the 1040 attached. Looks a bit rough but the compression is excellent, a few valves replacing and a rewaxing needed. Is it silly to think about changing it from a G to a D?

You should be able to get a set of D reeds easily enough, the compression is good and the `weathered` appearance no real disadvantage. 1040s/1140s in D seem to be less common than those in G, so you may find that the extra cost of a replacement set of reeds justifies itself.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 1040 age
« Reply #6 on: May 18, 2024, 12:22:10 PM »

If you can get hold of a set of F reeds from a scrap box, with a little filing and /or soldering you can turn them into a D set.
Nearly all will only require one semitone alteration . By the time you've done the easy ones, the more involved ones will feel a lot easier.
You will need to source bottom F#/A but these could easily come from a dead PA with a bit of solder loading.
I'm assuming that as you are considering swapping the reeds yourself, you are up for a little bit of fettling.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Hohner 1040 age
« Reply #7 on: May 18, 2024, 06:53:45 PM »

If you can get hold of a set of F reeds from a scrap box, with a little filing and /or soldering you can turn them into a D set.
Nearly all will only require one semitone alteration . By the time you've done the easy ones, the more involved ones will feel a lot easier.
You will need to source bottom F#/A but these could easily come from a dead PA with a bit of solder loading.
I'm assuming that as you are considering swapping the reeds yourself, you are up for a little bit of fettling.

What files do you use for this job Pete? I have an old Club I C/F that I hope to convert to a D/G someday (I have the left hand reeds already). I’ve mapped the notes from C/F and so plan to go through the process you describe (F row to D and C row to G). Honestly though, I have found just getting a box tuned to an acceptable standard in the key it’s already assigned is hard enough work for a beginner, so I’m not sure I’d recommend that approach to the OP unless they’re very motivated by the idea!.. I guess if they kept the G reeds too, the F#/A could come from the G/A, with a bit more mix and match between the sets to save some filing… Personally though, my advice would be to get the box you actually really want straight away, and so maybe sell the G box on, and put the money towards a D box…
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal