Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: A screw loose/lost from a Dino Baffetti  (Read 880 times)

0 Members and 1 Guest are viewing this topic.

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
A screw loose/lost from a Dino Baffetti
« on: May 17, 2024, 03:41:30 PM »

I realised that I had lost one of the milled headed screws holding the perforated black plastic pallet cover on my single diamond Dino.
Looking for a replacement I realised it isn't an M3, its a 440, 3/8ths length.
Those I unearthed are dome headed with a slot, but otherwise a perfect fit.
 
I had assumed that the construction would be all metric.

Just thought I'd mention it here in case the info is of some use.
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A screw loose/lost from a Dino Baffetti
« Reply #1 on: May 17, 2024, 03:57:53 PM »

They are usually metric.  In this context I think 440 refers to the kind of steel the screw is made from.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A screw loose/lost from a Dino Baffetti
« Reply #2 on: May 17, 2024, 04:01:23 PM »

Correction 440 is a thread
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: A screw loose/lost from a Dino Baffetti
« Reply #3 on: May 18, 2024, 07:06:55 AM »

It's a very long time since I did my apprenticeship, but surely it's 4-40 UNC?  What I don 't understand is why on earth an Italian box maker would be using UNC threads!
Logged
We're all doomed ...

JD

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 235
Re: A screw loose/lost from a Dino Baffetti
« Reply #4 on: May 18, 2024, 01:48:42 PM »

I can't explain the use of UNC screws by an Italian manufacturer but I can say that Dino Baffetti have been using this size of screw for some time. I have two DB boxes in the house, a 1996 Black Pearl 3 and and a 2020 (ish) Carnival 2. Both use the same design of cover retainers and both use screws with the same thread size. The only difference is that the newer box uses larger heads on the screws.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal