Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Microvox M310 Microphone question…  (Read 4612 times)

0 Members and 1 Guest are viewing this topic.

Sebastian Trudgian

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
  • DG Pokerworks and also play Irish Whistle/Flute
Re: Microvox M310 Microphone question…
« Reply #20 on: May 23, 2024, 07:07:14 PM »

I realise I'm a bit late to this discussion but I am very confused by the original post.

The M310 that I had to deal with had a 1/4" jack socket as its output connector. The lead with the phono connector went to the separate bass microphone. The jack plug also acted as a switch to the internal 1.5volt battery. The M310 was connected to an unbalanced input on the mixer (no interface box) and worked very well. No conversion to XLR required. Has the OP's M310 been modified to use the phono as the output?

As far as I am aware phantom power is only supplied on balanced XLR inputs to a mixer desk. Putting 48volt power on an unbalanced jack socket sounds like a bad idea. Maybe I have just led a very sheltered life.


Apologies this is entirely my fault and down to my lack of audio equipment knowledge!

Yes the M310 I have has an internal battery, a fixed cable that goes to the bass microphone and a “1/4 JACK” (I mistakenly called it a “phono port”), a bit like a hole for a large headphone plug.

Sorry!

I then connect this 1/4 jack hole to a very short cable I have, which converts the 1/4 Jack to a female XLR

I then connect the XLR port on this very short cable to a long regular XLR cable, which goes into my mixing desk with the rest of the group (we have a Mackie ProFx10v3).

I generally connect this to one of the “combo xlr ports” which you usually plug a microphone into.

My worry is someone may accidentally click the “phantom power” button on this port/a sound person at a gig might do the same thing.

Do you think this is wrong/I should get a long “Jack” cable instead?

(Thanks for everyone’s help with this and apologies for my lack of knowledge here!)
« Last Edit: May 23, 2024, 07:14:20 PM by Sebastian Trudgian »
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Microvox M310 Microphone question…
« Reply #21 on: May 23, 2024, 07:44:49 PM »

Remember there are several types of ¼" jacks. 

TS (tip sleeve) unbalanced
TRS (tip ring sleeve) balanced or splitter/stereo.

and other special purpose wirings.
« Last Edit: May 23, 2024, 10:05:54 PM by Dick Rees »
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Microvox M310 Microphone question…
« Reply #22 on: May 23, 2024, 09:23:48 PM »


My worry is someone may accidentally click the “phantom power” button on this port/a sound person at a gig might do the same thing.

Do you think this is wrong/I should get a long “Jack” cable instead?

(Thanks for everyone’s help with this and apologies for my lack of knowledge here!)

The safe approach has been recommended by many already. Use a sensible length jack cable from the Microvox to an inexpensive DI box, then XLR cable from DI box to mixer. It removes the 'phantom power' issue, as well as helping to minimise cable noise, earth loops, impedance matching issues etc.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Sebastian Trudgian

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 124
  • DG Pokerworks and also play Irish Whistle/Flute
Re: Microvox M310 Microphone question…
« Reply #23 on: May 23, 2024, 09:29:52 PM »

Ok Thankyou everyone, I’ll do that 🙂
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Microvox M310 Microphone question…
« Reply #24 on: May 23, 2024, 11:31:54 PM »

Quote
The safe approach has been recommended by many already. Use a sensible length jack cable from the Microvox to an inexpensive DI box, then XLR cable from DI box to mixer. It removes the 'phantom power' issue, as well as helping to minimise cable noise, earth loops, impedance matching issues etc.

I'll only repeat this once more. An Xvive wireless link does all this, without costing a fortune (less than the price of a half decent microphone), plus there are some very useful other advantages, not least of this that  are there are no cables to trip over and it the simple setup takes takes moments. Plug in and switch on. Also, guaranteed to work seamlessly with a Microvox and, no cables = no cable hiss. They are very quiet. Far quieter than a cheap DI box.

If you never go outside the studio, the principle advantage of mobility may not be obvious. If you ever perform in an outdoor performance situation, such as providing music for dance at county shows and festivals, you will really appreciate that. Three members of our morris side used the same setup (with a variey of instruments, including melodeons, guitars, fiddles, recorders, whistles and flutes), of Microvox pickup (apart from the guitar, which doesn't need it), Xvive wireless link and Street Cube battery amps and it works a treat.
« Last Edit: May 24, 2024, 12:18:12 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Stotty

  • Stotty
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 191
Re: Microvox M310 Microphone question…
« Reply #25 on: May 24, 2024, 10:01:37 AM »

I'm another fan of the Xvive wireless links.  Even when you are playing seated the absence of cables is a great relief. They recharge quickly and have very good battery life.
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Microvox M310 Microphone question…
« Reply #26 on: May 24, 2024, 10:21:15 AM »

Wireless is very useful if you need to be mobile. In the situations TDG describes I can well understand the advantages.

I've been playing in ceilidh bands for 40 years at venues of all sizes and on large and small stages.  Even on a large stage I don't need to move around while playing my instruments and a wired connection works fine for me.  I do use wireless in-ear foldback because I do need to move between different stations when changing from playing melodeon or concertina to playing dulcimer. 

Wireless is not without its problems. Different systems may interfere with one another.  We had a problem with my in-ear and our caller's radio mic, which simply putting them on different channels didn't resolve. It took some trial and error to find the right channel settings and positionings of the transmitter and receiver to get it right. When we work with a visiting caller who has their own radio mic we don't have the luxury of time.

On one occasion we were playing in a church hall and someone came to complain that the caller's radio mic was interfering with the priest trying to say Mass next door!

Some venues just don't work well with radio, for reasons which aren't easily explained.  Maybe it's reflections in the room, something to do with the electrical wiring, or something else - who knows? We don't have the time or technical expertise to find out.

A ceilidh band typically has about an hour to load in, set up and sound check, and there often simply isn't time to track down and sort out any issues with wireless systems. Cables are usually more reliable, and easily swapped if there's a problem.

Wireless is a great solution to an entirely different problem. If you want to be mobile then definitely consider wireless. If you get tangled in too many wires then wireless will remove them. If the objective is simply to isolate the mics from phantom power then a DI box or a jack-to-jack lead direct to the mixer are simpler and cheaper.

No one has yet pointed out that the Microvox is not the best mic in the world. Unless you need wireless, the £100 or so you'd spend on wireless would be better put towards a better mic.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Microvox M310 Microphone question…
« Reply #27 on: May 25, 2024, 03:34:31 PM »

Wireless is very useful if you need to be mobile. In the situations TDG describes I can well understand the advantages.

I've been playing in ceilidh bands for 40 years at venues of all sizes and on large and small stages.  Even on a large stage I don't need to move around while playing my instruments and a wired connection works fine for me.  I do use wireless in-ear foldback because I do need to move between different stations when changing from playing melodeon or concertina to playing dulcimer. 

Wireless is not without its problems. Different systems may interfere with one another.  We had a problem with my in-ear and our caller's radio mic, which simply putting them on different channels didn't resolve. It took some trial and error to find the right channel settings and positionings of the transmitter and receiver to get it right. When we work with a visiting caller who has their own radio mic we don't have the luxury of time.

On one occasion we were playing in a church hall and someone came to complain that the caller's radio mic was interfering with the priest trying to say Mass next door!

Some venues just don't work well with radio, for reasons which aren't easily explained.  Maybe it's reflections in the room, something to do with the electrical wiring, or something else - who knows? We don't have the time or technical expertise to find out.

A ceilidh band typically has about an hour to load in, set up and sound check, and there often simply isn't time to track down and sort out any issues with wireless systems. Cables are usually more reliable, and easily swapped if there's a problem.

Wireless is a great solution to an entirely different problem. If you want to be mobile then definitely consider wireless. If you get tangled in too many wires then wireless will remove them. If the objective is simply to isolate the mics from phantom power then a DI box or a jack-to-jack lead direct to the mixer are simpler and cheaper.

No one has yet pointed out that the Microvox is not the best mic in the world. Unless you need wireless, the £100 or so you'd spend on wireless would be better put towards a better mic.

Cecil Sharp House is notorious for wireless problems -- the first time we played their with our Behringer XR18 digital mixer it was impossible to get a working wireless link to control it even right next to it, we had to run down to Tandy's (which still existed then) and buy a long Ethernet lead. The problem is with the 2.4GHz band that nearly everything uses, I've also had difficulties there with a wireless link to my bass guitar.

Since we switched to using a router on 5GHz we've never had any problems, there or anywhere else.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal