Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: One row, four bass melodeon in D: what basses would you pick for ITM?  (Read 2077 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144

Hey folks,

I was contemplating building a four bass, one row Melodeon in D myself in the not so distant future and was pondering what basses made the most sense for playing Irish Traditional Music. I know that typically I've seen one rows with four basses set up as:
(D+|A+) (D|A) (G+|G+) (G|G)

But I wondered if it would make more sense to have the D be the bass that plays push and pull as the G typically does, and reposition G next to A. Would it be odd to consider D and G both ways as well? That A missing would be a bit odd. I'd love to hear you folks thoughts on what you'd think would be lost and if there is a better option than the standard. Or perhaps it's the standard for the best reasons already, considering it's what ended up on D boxes in the first place.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Based on the next most useful modes of D major used in ITM; E Dorian and A Mixolydian (or gapped with no 7th), an A/E bass instead of G/G might be a good option (with all chords thirdless, particularly so the E5 chord can fill in for major or minor)…
« Last Edit: June 12, 2024, 07:20:08 AM by Arnold »
Logged
Dancing about architecture since 1997

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144

Ooh, that's a very good idea. Id be omitting the thirds from the bass chords for sure, as the major thirds tend to not get much use from me otherwise. E/A is on my B/C box, but I had been wondering if I'd appreciate a semi joe burke layout, however it would give me more options for more tunes having that E/A
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner

For my 6 voice box in D I had standard D/A bass/chord and just the bass notes of G/G and B/E.
It doesn't seem to matter a lot what the chord is (it's always D or A) if the bass note is what you want.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640

For my 6 voice box in D I had standard D/A bass/chord and just the bass notes of G/G and B/E.

It doesn't seem to matter a lot what the chord is (it's always D or A) if the bass note is what you want.


Agree.

Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Conversely, from what I’ve heard of Irish players anyway (Jackie Daly being my primary source), the chords get more use than the bass notes, so maybe 4 pairs of chords instead of 2 pairs of bass and 2 pairs of chords?.. eg D/A, A/E, G/G, B/B, all open chords…

*regarding the original layout which is intended for playing in the home major key of D, it does make sense having all of the primary chords, but the G on the push is arguably of least importance and might be improved for example as a Bm chord (which harmonises with 2 or sometimes all 3 of the push notes)… On the other hand, A/E brings you a little out of the home major key of D, giving the 2 most important chords to establish tonality D major (D,A), E Dorian (E,D), and A major (A,E)…
« Last Edit: June 12, 2024, 06:28:07 PM by Arnold »
Logged
Dancing about architecture since 1997

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403

There may be useful comments in this thread: http://forum.melodeon.net/index.php?topic=20847.20
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

There may be useful comments in this thread: http://forum.melodeon.net/index.php?topic=20847.20

That’s more to do with how the reedplates are placed in the box rather than the tuning of the reeds themselves. Although there is a brief mention of D/A, A/E pairing towards the end of the thread (in reference to a D/C# box…)
Logged
Dancing about architecture since 1997

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403

Quote
That’s more to do with how the reedplates are placed in the box rather than the tuning of the reeds themselves. Although there is a brief mention of D/A, A/E pairing towards the end of the thread (in reference to a D/C# box…)

You're talking about replies #24-25, I think. The one I had mostly in mind was the next one, #26. The type of D/C# mentioned, with only a partial C# row, is not too different from a 1-row so chord/bass info should be relevant.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Yes, interestingly I once had an early 20th century one row in D with the D/A, F#m/Bm chord combination mentioned… I didn’t have it for long and found those chord choices very odd (although it’s always possible to find interesting possibilities with whatever is given)!.. For a box playing purely in D major, I think D/A and Bm/G would be good choices. For D major with E Dorian, maybe D/A and Bm/Em would be better. Whilst for D major with some E dorian and A major, D/A and A/E (thirdless) could be the way… Not much in the way of functional harmony of course, but you can get tired of all that…  :||:
« Last Edit: June 12, 2024, 09:33:44 PM by Arnold »
Logged
Dancing about architecture since 1997

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: One row, four bass melodeon in D: what basses would you pick for ITM?
« Reply #10 on: June 12, 2024, 11:20:35 PM »

A 4-bass layout often found on D/C# boxes was D/A and D/G.  What I would find to be most useful would either be D/A and G/G or D/A and A/E (thirdless). I believe the latter is how Martin Quinn set up his one-row, 4-bass boxes that he’s built.
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: One row, four bass melodeon in D: what basses would you pick for ITM?
« Reply #11 on: June 13, 2024, 12:46:17 AM »

A 4-bass layout often found on D/C# boxes was D/A and D/G.  What I would find to be most useful would either be D/A and G/G or D/A and A/E (thirdless). I believe the latter is how Martin Quinn set up his one-row, 4-bass boxes that he’s built.
Would you be just making the E thirdless? Or both?
I have the standard Hohner A/D setup in the box I converted to C#/D .
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal