Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How to remove scratches from black plastic?  (Read 1015 times)

0 Members and 1 Guest are viewing this topic.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
How to remove scratches from black plastic?
« on: June 12, 2024, 06:05:40 PM »

I'd like to remove or at least minimise the more noticeable surface scratches on the black plastic fingerboard of my Erica. The only way I can think of doing so is by careful use of a very mild abrasive (e.g. Solvol Autosol?) on a felt disc on the Dremel.  Before I set to, has anybody found a better way that they'd care to share?
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to remove scratches from black plastic?
« Reply #1 on: June 12, 2024, 07:08:36 PM »

I’ve found that metal polish can work well.  If you use power tools you have to go very slowly and lightly so that you don’t generate heat that can soften the surface.  For something the size of a keyboard I think I would just work by hand. If metal polish doesn’t get the scratches out you can go for a slightly coarser abrasive and then work through finer grades as you would do for polishing metal
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: How to remove scratches from black plastic?
« Reply #2 on: June 12, 2024, 08:18:34 PM »

Yep, you're right - safer to do by hand.  I'll try 400 or 600 grit wet 'n' dry, then 800 or 1000 if I can find it, then metal polish as you suggest.  Thanks.
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to remove scratches from black plastic?
« Reply #3 on: June 12, 2024, 08:21:23 PM »

I would start with 800 or 1000 they will cut much faster on plastic.  Ideally use wet & dry with plenty of water to reduce clogging of the abrasive.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: How to remove scratches from black plastic?
« Reply #4 on: June 13, 2024, 02:24:28 PM »

So ... 800 wet 'n' dry followed  by Solvol Autosol metal polish followed by Goddard's Silver Polish (which is just a suspension of jeweller's rouge in water) then a touch of Mr Sheen, and job done  (:)
Logged
We're all doomed ...
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal