Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Corso tuning  (Read 4230 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Corso tuning
« on: June 15, 2024, 05:35:26 AM »

I would like to tune a Hohner Corso, what can I find tuning data ?  (tremolo )
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Corso tuning
« Reply #1 on: June 15, 2024, 03:02:56 PM »

It's relatively straightforward. Tune one reed to concert pitch then tune the other two a bit sharp and a bit flat to get to tremolo of your choice. Once you have concert pitch ..which you set by tuning the reeds in situ in the box, the tremolo tuning can be done on a tuning table..which will get it pretty close. You can do it while the blocks are in the box too, but it is slower to do it this way. Others on here will say you should never tune on a tuning table…but setting the tremolo is one of the things you can do like this.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #2 on: June 15, 2024, 06:08:13 PM »

It's relatively straightforward. Tune one reed to concert pitch then tune the other two a bit sharp and a bit flat to get to tremolo of your choice. Once you have concert pitch ..which you set by tuning the reeds in situ in the box, the tremolo tuning can be done on a tuning table..which will get it pretty close. You can do it while the blocks are in the box too, but it is slower to do it this way. Others on here will say you should never tune on a tuning table…but setting the tremolo is one of the things you can do like this.

Ok, Thanks,, another reeds+  another reeds  - ?   I've listened, the Corso Tune is pretty wet, Maybe I'd like a bit drier,
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Corso tuning
« Reply #3 on: June 15, 2024, 07:14:29 PM »

Standard Hohner Corso tuning is in the vicinity of  +20, 0,-15.  I have one that I tuned drier at +-14 and I think it’s perfect.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Corso tuning
« Reply #4 on: June 15, 2024, 07:49:38 PM »

That's pretty much what I did too.
+20 and -15 was too much for me.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #5 on: June 16, 2024, 04:20:27 AM »

Standard Hohner Corso tuning is in the vicinity of  +20, 0,-15.  I have one that I tuned drier at +-14 and I think it’s perfect.

Thank you, I am very ignorant, That's why I would like +/- cents for all votes, You said that Corso's standard tuning is +20 -15 cents,
What sound is that? maybe A 440??  Sorry I'm old and stupid, bad language skills, but I'd like to learn,, This tuning is quite new to me, I'm practicing
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Corso tuning
« Reply #6 on: June 16, 2024, 07:29:04 AM »

If you have the 'concert pitch' reed set correctly (it is 0 cents, give or take 2 or 3 cents either side), you can tune the tremolo without knowing the cent offset. For each note on the right hand side, first set the concert reed to zero cents, then don't touch it again, then you tune one reed a little sharper and listen. If the tremolo is not faster enough you sharpen a tiny bit more. If it is too much you flatten the reed. The idea is to get adjacent notes consistent..i.e. with a similar tremolo. You then do the same with the second (flat) reed. Only it is the reverse (because it is flatter than the concert reed). To speed up the tremolo you flatten it. To decrease you sharpen it (to bring its pitch closer to the concert 0 cent reed). It is easy to be confused by a table of cent tuning offsets. If you use your ears you can set the tremolo as I describe (and this is exactly how I tune the high notes on piano accordions, because the cent offset is so small).
« Last Edit: June 16, 2024, 07:30:52 AM by Rog »
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Corso tuning
« Reply #7 on: June 16, 2024, 09:01:21 AM »

the tremolo tuning can be done on a tuning table..which will get it pretty close. You can do it while the blocks are in the box too, but it is slower to do it this way.

On the contrary. It's  faster (much faster!), easier and more accurate.
« Last Edit: June 16, 2024, 09:52:59 AM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Corso tuning
« Reply #8 on: June 16, 2024, 09:42:09 AM »

I agree with Diatonix on this.  I’d also question getting the pitch correct with 2 or 3 cents.  That seems a very wide tolerance to me.

On a more general point about taking on this tuning task.  It’s a big job and there’s a lot to learn.  I had attempted to tune several old boxes of little value before I tried on a box that I wanted to play.  Tuning is a high level skill and like any skill it can be learned but it does take many hours of practice to become proficient.  I suggest starting with a smaller task that gives you more chance of success.  For example try listening carefully to each note on your instrument and identify those that sound different.  Then take one note that is different and compare it to notes that are closest in pitch. Sound each reed on its own and make a chart of the deviations  from concert pitch.  Looking at the differences you can start to learn about how pitch differences affect the sound.   You can then make adjustments to the reeds and see if you can achieve the sound that you want.
« Last Edit: June 16, 2024, 09:46:08 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #9 on: June 16, 2024, 04:41:48 PM »

I agree with Diatonix on this.  I’d also question getting the pitch correct with 2 or 3 cents.  That seems a very wide tolerance to me.

On a more general point about taking on this tuning task.  It’s a big job and there’s a lot to learn.  I had attempted to tune several old boxes of little value before I tried on a box that I wanted to play.  Tuning is a high level skill and like any skill it can be learned but it does take many hours of practice to become proficient.  I suggest starting with a smaller task that gives you more chance of success.  For example try listening carefully to each note on your instrument and identify those that sound different.  Then take one note that is different and compare it to notes that are closest in pitch. Sound each reed on its own and make a chart of the deviations  from concert pitch.  Looking at the differences you can start to learn about how pitch differences affect the sound.   You can then make adjustments to the reeds and see if you can achieve the sound that you want.

Thanks Theo,
I agree, it's pretty hard, I'm just studying,
I have tuned one reeds Bock 0 cent (0-0.2 cent ) in a box ....  A bit unclear to me,,, If there are two voices, it is easier to tune the tremolo ,, But in Corso, three votes ,,   I think one reed 0 cent, the other reed + Komas reed -? But is + and - the same cent?
What could be Coso's tuning level?? A 440 maybe +15 / -15 ??  my ear doesn't necessarily tell what a good tuning is ..
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Corso tuning
« Reply #10 on: June 16, 2024, 06:02:35 PM »

I have a practical method using cents deviation and a standard electronic tuner, which sounds like what you’re looking for I think... I’ve used it for a few boxes now, and I can say that they do at least sound a lot better than they did before!.. It’s just a matter of extending the principle from m, m+ to m-, m, m+…

If you take the suggestion of -/+ 14 cents at A440 given above, then it is as follows…

Basically, every 3 notes that you ascend chromatically, the cents deviation reduces by one, so A4, Bb4, B4 are -/+ 14 cents, C5, C#5, D5 are -/+ 13 cents and so on… When you get to A5 you’re at -/+ 10 cents, whilst down at A3 you’re at -/+ 18 cents. This approach might be too linear, but I don’t think it’s too far off…
Logged
Dancing about architecture since 1997

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #11 on: June 16, 2024, 06:45:37 PM »

Thanks Arnolt  (:) I'll try
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Corso tuning
« Reply #12 on: June 16, 2024, 07:10:13 PM »

Thanks Arnolt  (:) I'll try

No problem. I was just trying to get the discussion more into the ballpark of what I think you were asking for on a practical level…  I’d probably wait for someone with more experience to chime in before committing, but I don’t think it’s far wrong!..
Logged
Dancing about architecture since 1997

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #13 on: June 16, 2024, 07:27:24 PM »

Ok,, Thanks ,,,
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Corso tuning
« Reply #14 on: June 16, 2024, 10:20:19 PM »



If you take the suggestion of -/+ 14 cents at A440 given above, then it is as follows…

Basically, every 3 notes that you ascend chromatically, the cents deviation reduces by one, so A4, Bb4, B4 are -/+ 14 cents, C5, C#5, D5 are -/+ 13 cents and so on… When you get to A5 you’re at -/+ 10 cents, whilst down at A3 you’re at -/+ 18 cents. This approach might be too linear, but I don’t think it’s too far off…


This is a pretty good, albeit rough description. It's basically my formula for most two voice boxes. The same could easily be applied to three voice but just keep the one row for each voice at pitch.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Corso tuning
« Reply #15 on: June 17, 2024, 06:41:12 AM »

Yes, just to be clear, by -/+ 14 cents, I mean -14, 0, +14 cents on a mmm box. On a mm box tuned in the standard way it would be 0, +14…

You can write it all out on a table with all chromatic notes listed in left hand column, say G3 to G6 then a column for - reeds, followed by a column for + reeds… In this system G3 will read -19, 0, +19, then up to G6 at -7, 0, +7.
« Last Edit: June 17, 2024, 07:53:10 AM by Arnold »
Logged
Dancing about architecture since 1997

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #16 on: June 17, 2024, 07:33:50 AM »

Yes, just to be clear, by -/+ 14 cents, I mean -14, 0, +14 cents on a mmm box. On a mm box tuned in the standard way it would be 0, +14…

You can write it all out on a table with all chromatic notes listed in left hand column, say G3 to G6 then a column for - reeds, followed by a column for + reeds…

Thanks, this thing, I was a bit confused, but now it's clear...
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Corso tuning
« Reply #17 on: June 17, 2024, 08:09:31 AM »

It’s worth pointing out things are never entirely straightforward. One potential issue with this symmetrical type of tuning is that the box might sound ‘flat’ against other boxes tuned mm+. Maybe that’s one of the reasons why the original mmm boxes were skewed towards the +?.. Something like -12, 0, +16, could be a mild compromise…
Logged
Dancing about architecture since 1997

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #18 on: June 17, 2024, 08:47:58 AM »

It’s worth pointing out things are never entirely straightforward. One potential issue with this symmetrical type of tuning is that the box might sound ‘flat’ against other boxes tuned mm+. Maybe that’s one of the reasons why the original mmm boxes were skewed towards the +?.. Something like -12, 0, +16, could be a mild compromise…

I have to try which one feels better
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Corso tuning
« Reply #19 on: June 17, 2024, 08:50:26 AM »

Thanks for the advice, maybe I can get the Corso tuned now  (:)
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal