Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Anahata Layout: Reed Sourcing from Hohner (?)  (Read 1967 times)

0 Members and 1 Guest are viewing this topic.

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Anahata Layout: Reed Sourcing from Hohner (?)
« on: June 18, 2024, 05:04:10 PM »

I am looking to convert my box to a Anahata layout/G scale/4button start box.  Here in the states, there are not a lot of options for reed sourcing, unlike you guys across the pond...

Hohner sells reeds (for $9USD a pop! yikes!), but that seems like the only real source aside from buying an old box for a couple hundred bucks.  I think the reeds I need would be Reeds #2 and #3 from their GCF accordion, see the layout from their website here: https://www.hohner.de/fileadmin/documents/instruments/accordions/diatonic/HOHNER-fingeringcharts_diatonic-keyboard-GCF-31-buttons.pdf

Can you guys confirm if this seems right? The notes are right, certainly, but are they in the right octave...that is the question.
Alternatively, does the Hive Mind of Mel.net know any alternative US sources for these reed plates?
Logged

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #1 on: June 18, 2024, 05:06:16 PM »

I should also specify, this would be for a DG Hohner Pokerwork with the newer T reeds.  If I like it well enough I will likely try to convert my older CF H reed pokerwork, if I can find H reeds for it...
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #2 on: June 18, 2024, 05:33:22 PM »

Yes, those notes are in the right octave.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #3 on: June 18, 2024, 07:23:53 PM »

All new Hohner parts (and especially reeds) are vastly overpriced.  The reeds are more expensive than any top-of-the-line handmade, Italian reeds, just to put it in perspective.  The only place that I've found Hohner reeds for sale at a fair price is here on Melnet through various members who have used sets or individual reeds available.  A wanted ad can often turn up what you're looking for.  Another option is to repurpose a few Hohner PA reeds to make what you're looking for.  Best of luck.
Logged
C#/D player

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #4 on: June 18, 2024, 08:09:11 PM »

All new Hohner parts (and especially reeds) are vastly overpriced.  The reeds are more expensive than any top-of-the-line handmade, Italian reeds, just to put it in perspective.

Holy Smokes! Really?? I knew they were overpriced, but I didn't realize it was by that much.  Good thing I popped in here first...
Just curious, how does one go about ordering new reeds from, say, Casta's supplier....

There is a local accordion repairman close to me, (relatively new in the area) that charges $20/reed, tuned* and valved, so I was thinking maybe $9 wasn't insanely expensive, but still more than I would have expected.  It is, after all, not much material or assembly.  Just maybe a bit niche.  (that was even for a unisonoric reed, not a more niche bisonoric reed!)

*tuned on its own, not fine-tuned in the box, nor did the price include install or anything else

Thankfully, one of you wonderful Mel.Net'ers reached out and may have some reeds that I can buy.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #5 on: June 18, 2024, 11:39:45 PM »

I don’t think $9 for a single new reed from the manufacturer is excessive.  That’s about £7.  If you bought a full set the price per reed should be lower.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #6 on: June 19, 2024, 12:15:40 AM »

I'm astonished, to say the least! Admittedly, it's probably about a year since I bought direct from Hohner Germany, but a D/G set on the blocks was only about £180 or something. Have you checked with them? I'm aware that they're Chinese, but I've had no problems with them.
Of course you wouldn't get every last reed you'd need for a G scale with accidentals, but it would work out at a lot less than the $500+. I'm sure that postage to the US wouldn't come to $300 or whatever!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #7 on: July 16, 2024, 06:45:03 PM »

I want to give a shoutout to Pat McInnis for his excellent help in sourcing some reeds.  If anyone needs some reeds or any other help over in NA, give him a shout!

Cheers!
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #8 on: July 17, 2024, 11:56:31 AM »


  When we voted that "4th start" and more specifically Anahata's "G layout" was best for the standard British box, I wrote to the larger, non bespoke manufacturers. Hohner was the only one … not to reply sympathetically.

  Actually … Hohner didn't even deign to reply 🥴
Logged
  _       _    _      _ 

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Anahata Layout: Reed Sourcing from Hohner (?)
« Reply #9 on: July 17, 2024, 02:48:03 PM »


  When we voted that "4th start" and more specifically Anahata's "G layout" was best for the standard British box, I wrote to the larger, non bespoke manufacturers. Hohner was the only one … not to reply sympathetically.

  Actually … Hohner didn't even deign to reply 🥴
The reason Hohner did not bother to reply, in my opinion, is that we were discussing D/G boxes which were a tiny part of their output, I used the term were as it is now 0% of their output since they dropped the product line
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal