Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reed valve problem  (Read 3228 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Reed valve problem
« on: June 25, 2024, 08:40:30 AM »

I don't understand,, A few weeks ago I glued the reeds valves,  :-\ Now I noticed that several valves were curled ..
The curled valves are on the underside , one reed block has maybe 4-6 valves that are curled, I have bought valves from Italy and the Czechs, Harmonikas,
There are maybe both of them in these reeds ,, the glue is Pattex ,,
I don't understand,, has anyone had a similar problem ??
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed valve problem
« Reply #1 on: June 25, 2024, 08:46:05 AM »

The glue you used is reacting with the valves causing the distortion.  Try using a different brand of glue, or a solvent free version.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed valve problem
« Reply #2 on: June 25, 2024, 08:51:19 AM »

I needed to repair my cycling shoes a few weeks ago, and I bought this stuff:
https://www.ebay.co.uk/itm/175240976494

When it arrived, I figured that it smells, looks and glues exactly like the Hohner stuff at 10x the price.

I've used it for my last re-valve and it does not melt the valves that get melted by blue bostik.

No affiliation with the seller, and be warned, this stuff smells like it's going to shave off a couple years of your lifespan (just like the Hohner-branded one).
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reed valve problem
« Reply #3 on: June 25, 2024, 09:34:01 AM »

The glue you used is reacting with the valves causing the distortion.  Try using a different brand of glue, or a solvent free version.

Thanks,, Can you recommend some glues ??
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed valve problem
« Reply #4 on: June 25, 2024, 10:59:46 AM »

It depends on how the glue reacts with the material the valves are made from.  So just try  other glues that are easily available. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reed valve problem
« Reply #5 on: June 25, 2024, 11:26:36 AM »

It depends on how the glue reacts with the material the valves are made from.  So just try  other glues that are easily available.

Ok, Have to try,,,,, I looked at my Pattex glue, it says no solvents ,
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Reed valve problem
« Reply #6 on: June 25, 2024, 08:17:41 PM »

The glue you used is reacting with the valves causing the distortion.  Try using a different brand of glue, or a solvent free version.

Thanks,, Can you recommend some glues ??

I use the original clear Gorilla glue, not the one that foams and it works as it should. Easy removal and clean up as well if needed.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed valve problem
« Reply #7 on: June 25, 2024, 09:32:33 PM »

"not the one that foams"

Is it supposed to do that? My tube of Gorilla worked fine, but after leaving it for a month (or so) the next time I used it, it did exactly that, foamed!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed valve problem
« Reply #8 on: June 25, 2024, 09:35:21 PM »

The trouble with recommending Gorilla glue is that they sell many different types of glue: cyanoacrylate, polyurethane, and probably half a dozen others.  They all have different properties.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Reed valve problem
« Reply #9 on: June 25, 2024, 10:21:37 PM »

the eternal glue quest. im currently favouring carinis solvent based glue for leather valves and uhu solvent free for all other valves. some find solvent based evo stick and bostik ok for plastic valves but ive had curled valves so currently its a evo for me. with solvent glues ive even had plastic valves distorting a few days later even though they seem ok at first. bostik solvent free was great but then it disappeared off the market alas.
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reed valve problem
« Reply #10 on: June 26, 2024, 05:10:38 AM »

It would seem that others have similar problems,   my friend praised Bostik Superchiaro glue,
Do  have any experience with this?
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Reed valve problem
« Reply #11 on: June 26, 2024, 05:58:46 AM »

The trouble with recommending Gorilla glue is that they sell many different types of glue: cyanoacrylate, polyurethane, and probably half a dozen others.  They all have different properties.

I'll have to check what mine is besides original and clear but it works well.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed valve problem
« Reply #12 on: June 26, 2024, 07:37:48 AM »

I use EvoStik Impact, you can get the problem Dino showed if you use too much adhesive

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reed valve problem
« Reply #13 on: June 26, 2024, 07:53:18 AM »

I use EvoStik Impact, you can get the problem Dino showed if you use too much adhesive

I have thought about this issue, if there is too much glue, I have wondered when only some plastics curl, not all ,,
Maybe that's the problem, I just have to try again
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed valve problem
« Reply #14 on: June 27, 2024, 07:14:59 AM »

Pattex is probably one of the most unsuitable glues when it comes to accordion valves (vinyl or leather). It is very watery and has a tendency to flow where it's not supposed to. It penetrates thin leather. Its strong solvents damage vinyl valves.
« Last Edit: June 27, 2024, 07:27:20 AM by diatonix »
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Reed valve problem
« Reply #15 on: June 29, 2024, 01:16:49 PM »

Pattex is probably one of the most unsuitable glues when it comes to accordion valves (vinyl or leather). It is very watery and has a tendency to flow where it's not supposed to. It penetrates thin leather. Its strong solvents damage vinyl valves.

Thank you. there's a lot of choice in glues, you just have to try what's good ,, ::)
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed valve problem
« Reply #16 on: June 29, 2024, 10:27:16 PM »

Does anyone use shellac to glue valves? One of the advantages is that old worn leather valves (probably fixed with shellac? Someone correct me on this) pull off easily and are therefore straightforward to replace. You want the valves to stay on, obvs, but you don't really want them welded to the reed plate so you can't get them off. Especially if they are inside valves and one is removing and replacing stiff valves with tweezers. I mostly use solvent free UHU, but it is v strong and I'm not sure how desirable this is in the long term. On big old piano accordions, where the wax is ok, replacing valves without removing the reeds saves a lot of time (and is therefore significantly cheaper than stripping off hundreds of reed plates).
« Last Edit: June 29, 2024, 10:30:33 PM by Rog »
Logged

Nigel Champion

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: Reed valve problem
« Reply #17 on: June 30, 2024, 06:52:56 AM »

Hi Rog.
I use a shellac-based gasket cement for leather valves.  It was used in the days of leather or cork engine gaskets. I find its slow setting is ideal for positioning internal valves with minimal mess. The consistency has to be right though - too thin and there a risk of seeping into the slot; too thick and it doesn't penetrate the leather surface enough.
Nigel
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed valve problem
« Reply #18 on: June 30, 2024, 07:00:40 AM »

Interesting. What is the product?

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed valve problem
« Reply #19 on: June 30, 2024, 08:07:46 AM »

It sounds like Stag. But I haven't seen that for sale in the past 50 odd years, at least.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal