Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Rust remover?  (Read 2465 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Rust remover?
« on: July 01, 2024, 07:42:31 AM »

Hi, I’ve got a lovely Hohner pressed wood box here, except the corners which are proper caked in with a kind of rust, that has somehow leached into some of the varnish (see pic). I’ve dealt with this sort of thing before (on metal bits anyway) with wire wool, but I was wondering whether anyone has used a liquid chemical type of rust remover?.. I’ve been told HG brand is good… thanks
Logged
Dancing about architecture since 1997

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Rust remover?
« Reply #1 on: July 01, 2024, 07:59:08 AM »

I've got similar stuff on my bellows corners on my latest box. Since the pitting is deeper than just surface level, I think mechanical removal  followed by a polish might be the only way to go.

I've used some good Bilt-Hamber products for treating rust inside and outside steel bike frames and they worked great, but won't help the cosmetics.

In your case getting brand new shiny corners might be the easiest option?
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Rust remover?
« Reply #2 on: July 01, 2024, 08:07:01 AM »

I've got similar stuff on my bellows corners on my latest box. Since the pitting is deeper than just surface level, I think mechanical removal  followed by a polish might be the only way to go.

I've used some good Bilt-Hamber products for treating rust inside and outside steel bike frames and they worked great, but won't help the cosmetics.

In your case getting brand new shiny corners might be the easiest option?

Hmm… I have a doner Student II box with the same corners, so perhaps I can swap them over then?.. How do you go about removing them? Do they just slide on and off?.. thanks
Logged
Dancing about architecture since 1997

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Rust remover?
« Reply #3 on: July 01, 2024, 08:12:05 AM »

No idea, but I'm waiting for the postie to deliver a wood+metal corners box any day now, so I'm about to find out.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rust remover?
« Reply #4 on: July 01, 2024, 08:37:12 AM »

They do slide off, but they can be vey tight. When I’ve removed rusted examples I’ve usually had to slit them along the corner.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Rust remover?
« Reply #5 on: July 01, 2024, 08:49:38 AM »

Thank you. Is there an easy way to make replacement corners? Or a place to buy spares?
If the new box is a player, I'm thinking of doing it up in brass rather than chrome.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rust remover?
« Reply #6 on: July 01, 2024, 09:48:24 AM »

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Rust remover?
« Reply #7 on: July 01, 2024, 11:16:34 AM »

I believe that they're nickel plated, rather than chrome. A couple of years ago, I found a plating service, not far from me, who was willing to do a batch of melodeon bits and pieces for £20.

The Hohner website often doesn't list the parts I want, but a phone call will sometimes elicit that those parts will be available again when they next decide to run some off, maybe in a month's time. And the prices I find to be usually quite reasonable, even for this skinflint!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rust remover?
« Reply #8 on: July 01, 2024, 11:23:43 AM »

I believe that they're nickel plated, rather than chrome.

Yes that's correct.  The new parts Hohner sells now are stainless steel which, to my eye, looks out of place on an old instrument. 
What Arnold descried earlier is much more in keeping - brass corners, possible nickel plated, off a scrapped Student I PA.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rust remover?
« Reply #9 on: July 01, 2024, 12:15:19 PM »

I have a quantity of these corners salvaged from various unrepairable boxes.  Just listed some for sale on my website.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Rust remover?
« Reply #10 on: July 01, 2024, 01:04:32 PM »

I believe that they're nickel plated, rather than chrome.

Yes that's correct.  The new parts Hohner sells now are stainless steel which, to my eye, looks out of place on an old instrument. 
What Arnold descried earlier is much more in keeping - brass corners, possible nickel plated, off a scrapped Student I PA.

Yes, of course I meant Student I not II  :|bl

I think I’ll try rust remover so I can report back, as it might be useful on screws etc anyway... I’m guessing the corners won’t come out looking shiny, but I don’t mind the finish looking dulled as long as it looks clean and is in keeping with the rest of the instrument… Is there anything that can be done about the discolouration of the wooden part? I’m guessing it’s basically soaked right in permanently…
Logged
Dancing about architecture since 1997

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Rust remover?
« Reply #11 on: July 01, 2024, 03:39:23 PM »

Surely there's a real danger that chemical rust remover would damage the woodwork if used on the corners in situ?
Logged
We're all doomed ...

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Rust remover?
« Reply #12 on: July 01, 2024, 03:42:26 PM »

Quote
Yes, of course I meant Student I not II

??? I assume you mean the box you have is Student I, but old Student IIs also had metal corners and could be a suitable source, unless I'm missing something.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Rust remover?
« Reply #13 on: July 01, 2024, 05:31:27 PM »

Surely there's a real danger that chemical rust remover would damage the woodwork if used on the corners in situ?

Yes, I had thought of that. Quality decorating masking tape ie frog tape I was thinking, and testing on a small area first!..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Rust remover?
« Reply #14 on: July 01, 2024, 05:50:39 PM »

Quote
Yes, of course I meant Student I not II

??? I assume you mean the box you have is Student I, but old Student IIs also had metal corners and could be a suitable source, unless I'm missing something.

Good point, but I wasn’t certain of that, and I did indeed mean to say Student I (which has the same body shape and bellows as pokerwork)
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Rust remover?
« Reply #15 on: July 01, 2024, 05:58:35 PM »

I used good quality masking tape, sometimes frog tape, to mask off the timber/paint/celluloid and rub the offending metalwork really hard with fine wire wool. Then polish with scrunched up bacofoil or similar.
It brightens up an old box, but won't get anywhere near original.
For rust stains you could try peroxide bleach then when thoroughly dried and neutralised, you can apply some wood stain before varnish/lacquer/polish.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Rust remover?
« Reply #16 on: July 02, 2024, 07:18:48 AM »

Marvellous, thanks for the tips! I think I know my approach now, I’ll report back with pics…
Logged
Dancing about architecture since 1997

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Rust remover?
« Reply #17 on: July 04, 2024, 03:00:24 PM »

My box has arrived, she's a keeper and the metal corners are in OK-ish shape, however, depending on how much work you want to put into your box, it's possible to replace them with wood.
Remove the corners, rout , say, 4mm steps in the corner, glue on some wood, then round on a router table to your radius (~6-8mm). Bob's your uncle.
Assuming you have a router table and the right bits.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Rust remover?
« Reply #18 on: July 05, 2024, 12:50:05 PM »

Household white vinegar and 0000 steel wool gives a vintage Hohner finish. Sometimes. If rust not too deep.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal