Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: LMH tuning  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

davidd

  • Member
  • *
  • Offline Offline
  • Posts: 44
LMH tuning
« on: July 21, 2024, 04:31:30 PM »

I have a Hohner 3 voice box and I was thinking about potentially changing it to LMH rather than the MMM it is in now. Is this easily doable or would it be more complicated than I imagine?  Not sure how readily available the reeds are to do this. Thanks.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: LMH tuning
« Reply #1 on: July 21, 2024, 04:48:33 PM »

I'm in process of converting MMH into LMM, and M or H to L is not quite as straightforward, as the other way round. You need to check you have enough space in the box so that your new enlarged reedblock is not hitting the bass blocks. I ended up shaving off 6mm from the tallest bass reedblock - thankfully, there was spare wood.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: LMH tuning
« Reply #2 on: July 22, 2024, 12:51:05 AM »

It is doable. It is not difficult but it's not trivial either. You'll be making a few reedblock mods, esp if you decide to use (say) Italian TAM reeds. My advice would be to use Hohner reeds, and the easiest way to go is LMM, because all you need are some L reeds.
« Last Edit: July 22, 2024, 12:54:56 AM by Rog »
Logged

davidd

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: LMH tuning
« Reply #3 on: July 22, 2024, 08:47:17 AM »

I would not be interested in using Italian reeds, Hohner reeds are fine for what I M looking for. And if it is too much effort to do LMH I probably will leave it as is. Thanks.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LMH tuning
« Reply #4 on: July 22, 2024, 08:58:24 AM »

The answer to your original question depends greatly on yiur previous experience of reed work. If you have the skills and tools to replace valves and wax and you have some me woodworking ability then it should be straightforward. 
Availability or reeds is obviously important too.  L octave Hohner reeds are not too hard to find, but piccolo reed sets are not at all common.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: LMH tuning
« Reply #5 on: July 22, 2024, 03:15:28 PM »

Quote
And if it is too much effort to do LMH I probably will leave it as is. Thanks.

You may wish to consider doing LMM instead - less effort, no problem sourcing H reeds, and retain the 'musette' sound of 2 slightly offset M reeds.

But maybe the 'musette' is exactly what you want to get away from ??  Thinking here of a friend's Corso with a very wet MMM sound to make ears bleed. I'm lucky to own a similar box tuned to (IMO) a much more pleasant and musical sound by Rees Wesson.   
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: LMH tuning
« Reply #6 on: July 24, 2024, 08:24:57 AM »

…make the ears bleed…. I have a 'scottish tuned' PA to work on…the outer MMM reeds are about 60 cents apart!!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: LMH tuning
« Reply #7 on: July 24, 2024, 08:48:07 AM »

the outer MMM reeds are about 60 cents apart!!

Sounds about right for the west coast - that's the only way you can scare the midges away. Otherwise they eat you alive.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal