Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Why are (some) zinc reedplates thinner than Aluminum, and what is the effect?  (Read 1392 times)

0 Members and 1 Guest are viewing this topic.

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144

Title describes the question. I first assumed that maybe making the zinc plates thinner would possibly cut down weight, but I'm not so sure that is the only reason. Aluminum plates are certainly thicker, maybe 15-20% thicker? Does this influence how the reed cycles? It must right? I'd like to understand just how much of an affect this difference in thickness has.
Are aluminum plates thicker just for rigidity/durability reasons or are they thicker for some other reason?
Logged

Paul Jewell

  • Member
  • *
  • Offline Offline
  • Posts: 49

It's been a long time since I did Materials Science at university...! In other words, I won't be offended if any of you shoot my theory down!

Zinc has a Young's modulus is 108 GPa, and Aluminium has a Young's modulus of 70 GPa. In other words, the zinc is stiffer, so to achieve the same vibration (= same note), you need to change the thickness of the reed, or the length. Changing the thickness may be easier to fit inside the box, whereas the length change may require a dimensional change to the box itself.

Edit (4/8): Sorry mChavez - I misread the original comment... I agree this has no bearing.
« Last Edit: August 04, 2024, 06:29:17 PM by Paul Jewell »
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713

Apologies - I think we're talking about plates, not reeds, so don't understand how the previous comment works.

There's various guesses about plate thickness, from "it's a critical factor to reed sound" to "it doesn't matter".
I'm in the latter camp, because slot edges have a certain amount of relief (if you don't count very cheap & nasty machine stamped reeds). So "effective" thickness of the slot is always lower than the total thickness of the plate.
In old harmoniums the relief can be as extreme as ~45 degrees in 2mm brass plates, so effective slot width is fractions of a mm. Yet, the reeds sound, and sound really damn well.
Soviets thought (many still believe this in eastern europe) that plates have to get thicker as the notes get lower, but the harmonium example completely contradicts this theory. I.e. They thought that for lower accordion bass range you need ~6mm plate thickness, but harmoniums work very well with < 0.5mm effective thickness.

There's certainly something to be said about plate thickness for long reeds and the risk that they will buzz against their valves. E.g. on 2mm plates, the risk that a bass reed will clip its valve is probably a lot higher than on a 6mm plate. At least that's my guess.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713

Another practical consideration is riveting.
It's nice & easy to rivet a reed onto a 2mm brass plate, but aluminium deforms by the rivet a lot more, and getting the right amount of grip is a lot harder when it's that thin.
It's much easier to rivet a reed onto a 3mm aluminium plate than on 2mm.

With zinc they were probably using the lowest plate thickness that was not messing up the riveter's job too much.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

Accepting all of the above as being their own part of the equation, surely the cost must also be considered? When producing (possibly millions of) reedplates a millimetre or two difference in the thickness of the material could be the difference between profit and loss!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Ross Dubois

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 144

Fascinating, and that bit about the harmonium plate thickness does indeed make sense. When I think about the few harmoniums and pump organs I've dealt with, their plates do tend to be rather thin. Thinner than concertina shoes if I recall correctly.
The possibility of slapping on a valve for large reeds does sound logical.

And indeed, perhaps cost is a factor for thickness, though I wonder how expensive zinc was versus aluminum at the time.

Also, I'd seen something about rivet workability on this site somewhere, discussing the ease of installation with a thinner more dense plate versus thicker and softer having an affect of riveting
Logged

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36

Probably somebody back in the day bought plate material based on what was commonly available, and did not order a specific thickness made to order.  I suspect trial and error is the key here rather than deliberate intent.

In fact, I suspect the development and materials of accordions/melodeons is mostly organic, at least from a perspective from distance.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal