Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 4-stop questions  (Read 2401 times)

0 Members and 1 Guest are viewing this topic.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Hohner 4-stop questions
« on: August 01, 2024, 02:22:16 PM »

The Lady Wife and I have just acquired a rather nice Hohner HA114C which plays and sounds lovely.  According to the seller, it was overhauled and tuned by Theo in 2021.  Pallet facings were replaced, magnets fitted to the stops, and strap brackets fitted.  I've been trawling old threads on here trying to put a rough date on it, but nothing I've read quite ties in with this one, which for all I know could be a bitsa.  Would anybody care to give us a likely age range for it?


 
Although the bass strap's obviously a replacement, I've included a snap of it because of the rather odd "C" stamp!

The only aspect of this box that I'm a bit unsure about is the strap brackets that have been added.  If I take one of the screws out, all it will tell me is how long it is.  What would either reassure me or give me cause for more concern is knowing how thick the wood is into which those two are screwed.  I don't particularly want to part the box to see for myself, so could someone please tell me?

« Last Edit: August 01, 2024, 02:29:43 PM by Disparate Dan »
Logged
We're all doomed ...

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner 4-stop questions
« Reply #1 on: August 01, 2024, 03:22:42 PM »

Early ones had horned wooden keyboards, plastic keyboard came later. But silver faceplate was also earlier than later gold ones. Other clues are the Hohner name (missing on early boxes) and the number of bellow folds. I would say 1960s for yours (but I could be wrong).

Nothing odd for the C on the strap for this box in C !! This is how key is indicated on plastic keyboard models - wooden keyboard ones have the stamp on keyboard end.

The thickness of the frame is the same as what you see from the end of the box (black perimeter), probably around 10-12 mm. I would be more concerned with how close the screws are to the edges.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner 4-stop questions
« Reply #2 on: August 01, 2024, 03:24:55 PM »

I agree, 1960s.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner 4-stop questions
« Reply #3 on: August 01, 2024, 03:44:32 PM »

Thank you gentlemen.  I'll have a think about the brackets.  I guess the alternative for the top one is to move it to the back and fill the screw holes.

What do folk normally do about strap brackets on these?

ETA - ref the bass strap, if this is the original, this box certainly hasn't been played much in 60 or so years!
« Last Edit: August 01, 2024, 03:52:24 PM by Disparate Dan »
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 4-stop questions
« Reply #4 on: August 01, 2024, 04:55:30 PM »

I put those strap brackets on. The screws don’t go all the way through.  There is no ideal strap bracket for these because the frame is so narrow. These are the best of about 6 different types I have.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner 4-stop questions
« Reply #6 on: August 01, 2024, 05:46:21 PM »

I put those strap brackets on. The screws don’t go all the way through.  There is no ideal strap bracket for these because the frame is so narrow. These are the best of about 6 different types I have.

Thanks Theo.

I use these https://www.diy.com/departments/brass-plated-large-picture-hook-pack-of-4/241772_BQ.prd

On the back?
Logged
We're all doomed ...

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hohner 4-stop questions
« Reply #7 on: August 01, 2024, 06:00:21 PM »

I use these https://www.diy.com/departments/brass-plated-large-picture-hook-pack-of-4/241772_BQ.prd

On the back?
Thusly


The provide screws are a bit too long so I screw them in to start the thread then remove them and cut a bit off then screw them home

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner 4-stop questions
« Reply #8 on: August 01, 2024, 06:06:12 PM »

Cheers Lester  (:)
Logged
We're all doomed ...

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner 4-stop questions
« Reply #9 on: August 01, 2024, 07:02:52 PM »

These are the best and strongest. One inch D rings as used by myself and all other makers of Cajun one-rows.
......... if you can find them!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner 4-stop questions
« Reply #10 on: August 01, 2024, 07:19:35 PM »

These are the best and strongest ......... if you can find them!

Well they certainly look the biz.  And having now spent a fair while searching for them online without success, I understand why you added the proviso!
Logged
We're all doomed ...

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 4-stop questions
« Reply #11 on: August 01, 2024, 11:02:10 PM »

I use these. I bought them off eBay.

Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

komat

  • Eastcoaster
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 228
Re: Hohner 4-stop questions
« Reply #12 on: August 01, 2024, 11:11:09 PM »

The trouble I find with the D rings is how clacky they can be.
Logged
Too many accordions, help!

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Hohner 4-stop questions
« Reply #13 on: August 01, 2024, 11:52:05 PM »

i get my d rings from louisiana. same size as rees suggests. ive tried in vain to find them in UK. i did find some slightly larger that worked. silver faceplates suggests an early model. all metal grille suggests very early (dont see many of those) plastic fingerboard suggests its probably been replaced. hohner logo on front suggests its not one of the earliest (they had no logo)....reeds probably H reeds. that would tie in with it being an early model but if they are t reeds thats not so early. buttons look to be flat topped rather than slightly domed so that would suggest a later (early) model. early stops had little dimple on top. but who knows. id guess 60's.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Hohner 4-stop questions
« Reply #14 on: August 02, 2024, 06:59:10 AM »

I use these. I bought them off eBay.

Ahah!  How wide a strap can you get through them?
Logged
We're all doomed ...

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 4-stop questions
« Reply #15 on: August 02, 2024, 09:58:15 AM »

It seems fine with all the old leather straps I've got lying around.
I only use the thumbstrap so these are for when other people play them.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner 4-stop questions
« Reply #16 on: August 02, 2024, 11:34:20 AM »

I've been sprotting through some boxes in my workshop and found a stash of one inch D rings with lug suitable for one row melodeons.
The D is plenty big enough for two straps.
Selling at £7.50 per pair plus postage.
PM me for further details.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal