Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pokerwork bellows  (Read 745 times)

0 Members and 1 Guest are viewing this topic.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Pokerwork bellows
« on: August 08, 2024, 11:59:36 AM »

Are they "one size fits all", in the sense that the bellows of any Pokerwork (be it one row or two) will fit any other Pokerwork?
Logged
We're all doomed ...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork bellows
« Reply #1 on: August 08, 2024, 12:13:55 PM »

Usually yes.  Very occasionally the pin holes don't line up if there is a very big age difference.  112 113 and 114 bellows frames are different to accommodate the thicker wood used for the case of those instruments.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Pokerwork bellows
« Reply #2 on: August 08, 2024, 01:17:48 PM »

Thanks Theo.
Logged
We're all doomed ...

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Pokerwork bellows
« Reply #3 on: August 08, 2024, 09:50:38 PM »

one row to one row or 2 row to 2 row yes same size,but you don't want to fit 1 row bellows on your 2 row poker work  ;) you can however fit 2 row bellows on your single row if you need more air/folds   
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal