Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed wax availability?  (Read 1857 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Reed wax availability?
« on: August 12, 2024, 09:45:11 AM »

"I also think a lot of it has to do with the manufacturing of the reed wax in the first place."

This quote is from another thread, obviously, and set me wondering.
As I will very shortly have a lot of reeds to wax into a new experiment, and only have a few of Mr Marshall's wonderful wax sticks left in stock, please would someone suggest a supplier of such? I'd prefer sticks as I use a soldering iron when waxing, but I suppose I could manage with a block of some sort if needs must.
One or two very generous members have sent me their own concoctions in the past, which have been excellent and I have been very grateful for, but I do need another commercial source now that Mr Marshall has packed in.
Any suggestions will be most welcome, thank you.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed wax availability?
« Reply #1 on: August 12, 2024, 10:47:36 AM »

I've recently posted a thread about my take on the soldering iron spoon. Tradition meets 21st century with a digitally controlled iron.
http://forum.melodeon.net/index.php?PHPSESSID=s0b4d7hqdv0v17oien1elv1274&topic=24977.msg357772#msg357772

With this one, I don't see any point in having wax in a stick as opposed to a block, as the spoon scoops up the wax off a block very nicely.

Costs under £30 if you shop around, and takes about 15 minutes to make.

Will send you a PM about some spare wax that I have.
« Last Edit: August 12, 2024, 10:52:54 AM by mChavez »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed wax availability?
« Reply #2 on: August 12, 2024, 11:46:17 AM »

Several years ago, I forked out real money and bought a proper wax melting machine. I made a variety of brass 'spoons' to use with it.
I also made a few adaptations to fit onto one of my (gifted) old electric soldering irons to use with the melting pot.
However, all the expense and time spent was wasted. I always ended up with molten wax where I didn't want it! I reverted to the tried, tested and trusted wax sticks and soldering iron; with an expended tip fashioned from thin brass plate, so that the actual temperature was rather dissipated so as not to burn the wax. This has been my preferred method for quite some time, but with the loss of Mr Marshalls sticks, maybe "The times they are a'changing"?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed wax availability?
« Reply #3 on: August 12, 2024, 12:24:05 PM »

I cut my own wax sticks from a regular wax block using a Stanley utility knife. Not sure this would work for all waxes, but it works for me.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed wax availability?
« Reply #4 on: August 12, 2024, 12:28:58 PM »

I cut my own wax sticks from a regular wax block using a Stanley utility knife. Not sure this would work for all waxes, but it works for me.

I also cut sticks from wax blocks. It's easy enough.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed wax availability?
« Reply #5 on: August 12, 2024, 01:39:11 PM »

Thanks for that encouragement chaps, I'll take the plunge, and buy the block from mChavez.
Profligate, or what?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed wax availability?
« Reply #6 on: August 12, 2024, 01:39:41 PM »

I cut my own wax sticks from a regular wax block using a Stanley utility knife. Not sure this would work for all waxes, but it works for me.

Ditto.
Logged
C#/D player

chris hall

  • Regular debater
  • ***
  • Online Online
  • Posts: 245
Re: Reed wax availability?
« Reply #7 on: August 12, 2024, 03:37:03 PM »

a few months ago i ran out of CGM wax sticks. bought a few blocks of italian wax off ebay. melted and poured into a swiss roll silicone flexible baking tray. cut into sticks before fully hardened. Obviously do it on level flat surface and melt enough wax to fully fill the tray to an even depth or you end up with sticks of varying thickness. Silicone tray is reuseable so you'll never go short of wax sticks and have enough to give away to all your friends.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed wax availability?
« Reply #8 on: August 12, 2024, 04:34:37 PM »

Fwiw, for individual reeds, feeding the wax straight off the soldering-spoon seems to be sufficient.
If I'm doing a full block, I melt some wax in a pot (baby bottle warmer) and use a small glass pipette to put the wax onto the reedblocks. Works very well and it's quite easy to accurately dose it. The only time it fails is when you have a very small gap between the reed plates. But that gets filled with the soldering-spoon later on.
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Reed wax availability?
« Reply #9 on: August 12, 2024, 10:08:41 PM »

Hohner also sells wax blocks if you cant find anyone else
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed wax availability?
« Reply #10 on: August 12, 2024, 10:20:44 PM »

Thanks Mus.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed wax availability?
« Reply #11 on: August 12, 2024, 10:55:00 PM »

The most economical option is getting wax from Carini.  It's something like €1 per 50 g, and it's as good as anything you'll ever need.  It's readily available and you can buy a bunch at once and never need to worry about wax again!  For those that like using strips of wax, you can just cut strips of whatever size you like with a utility knife.

Everyone has their own methods, of course, and what works best for them.  For me, I eventually settled on using a temperature controlled soldering iron (not one with variable wattage - that's different and not as effective at maintaining the desired heat at the tip) with a tip that I had customized by grinding/sanding down to a thin wedge that comes to a point in one plain, but remains flat in the other.  This allows the tip to pass between reedplates that are *extremely* close together, something I find quite common on the PA reedblocks that I often work on.  I cut the wax into thin strips that are no wider than my bit, and then it's a fairly quick and tidy process of just continuously feeding the upper end of the tip with wax while running the bottom end along where the reedplates meet the block.  The block rests on an 'L' bracket that I made which fits into an adjustable vice, allowing one to angle the block any which way one likes while working away.  It's quick and pain-free, and I use just the one tool, and the one bit, for 100% of my waxing requirements, whether it's for reeds or for attaching pallets to their levers, etc.  I suspect it's only marginally slower than someone who's very adept at using a waxing spoon.  And the results are very clean.
« Last Edit: August 12, 2024, 10:58:04 PM by mselic »
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed wax availability?
« Reply #12 on: August 12, 2024, 10:55:33 PM »

Additional photos:
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed wax availability?
« Reply #13 on: August 12, 2024, 11:15:32 PM »

Thanks also for that explanation and pics.
In principle, the iron mod is more or less what I've been using for quite some time.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal