Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stripping Bellows Tape  (Read 1527 times)

0 Members and 1 Guest are viewing this topic.

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Stripping Bellows Tape
« on: August 16, 2024, 01:13:19 AM »

Who doesn't love this messy job? In the past I have just picked away with a sharp hobby knife and every once in a while I'd get a tiny victory with an inch or two of old paper peeling off. I thought I remembered someone mentioning that they used a brush and warm water to help soften the old glue. Lester? Either way, I'm up for some technique tips if anyone has cracked the code.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Stripping Bellows Tape
« Reply #1 on: August 16, 2024, 07:25:02 AM »

After browsing through melnet, I found the option of microwaving a wet rag/towel (for about 15-20sec at a time) and placing it over the tape, 1-2 folds at a time.
Hide glue needs heat & water to weaken, and the towel supplies these exact things in a very fast and focussed manner.
Worked quite well, I've done one box, and I don't mind doing the next one when the time comes. Still takes a while, but completely stress-free.
Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Stripping Bellows Tape
« Reply #2 on: August 16, 2024, 08:57:20 AM »

+1 for wet rag and microwave. I use one those J cloth things, which idea I got from this site and it helped a lot. Although to be honest the whole shebang is so tedious I haven’t done it for ages.
Gren
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Stripping Bellows Tape
« Reply #3 on: August 16, 2024, 10:49:21 AM »

... Hide glue needs heat & water to weaken ...

Being familiar with hide glue from my reed organ restoration, I'm very surprised to see read of its use for sticking bellows tape on.  Is that only on really old boxes?  Surely Hohner wouldn't have used the stuff for the tape on our 1970s and 90s Ericas, would they?
Logged
We're all doomed ...

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Stripping Bellows Tape
« Reply #4 on: August 16, 2024, 04:49:57 PM »

Soviets used it in my 1964 box.

I don't see why not - in factory conditions hot hide glue is a no-brainer, as you just keep a big pot warm all day long, and you don't need to clamp anything when using it, so you can work faster. The major drawback of hide glue is that it's a royal pain in the behind to get it ready for for piecemeal work. That's why we have a huge variety of other bottled glues almost for every occasion.

I haven't tried gluing new tape back on yet, but I'll try hide glue and see what happens. Taping the bellows seems a big enough job to justify heating up the pot.
« Last Edit: August 16, 2024, 04:54:36 PM by mChavez »
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Stripping Bellows Tape
« Reply #5 on: August 16, 2024, 06:55:34 PM »

Well, I'm a big fan of hot hide glue for wood to wood, but I'll stick with fast-grab PVA for bellows tape  (:)
Logged
We're all doomed ...

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Stripping Bellows Tape
« Reply #6 on: August 16, 2024, 07:26:56 PM »

I'll be honest, I didn't know that the tape was glued with hyde glue. Seems annoying to deal with in small scale. That being said, knowing that a hot, damp cloth will help to release it, this may change how I strip old bellows. Although I have never owned a microwave. It's probably a chef thing.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Stripping Bellows Tape
« Reply #7 on: August 16, 2024, 08:24:30 PM »

I’ve just used a warm dampened cloth on one of the sides laid out over the bellows for a bit and then a slight rub over it all. And sometimes it pulls right off other times it doesn’t and it is work!!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal