Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Ordering new bellows  (Read 1230 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Ordering new bellows
« on: August 27, 2024, 06:19:00 PM »

I'm in the process of ordering new bellows from Carini.  I have a few questions about the depth of bellows folds that I'd love some feedback on. What are the advantages/disadvantages of a deeper bellows folds vs shallower ones?  The only obvious consideration to me is making sure the bellows folds have sufficient clearance from reedblocks and (swinging) reed tongues.  I'm inclined to think that deeper bellows folds would also result in a more 'supple' feel to the bellows, but I'm unsure. 

The current depth of bellows on two of my instruments is 28mm, measured from the outside of the instrument by sticking a zero-edge ruler into the fold and measuring out to the edge of the tape.  Is this the correct way to measure them for ordering bellows? Anything else to bear in mind when ordering bellows from Carini for those that have done it already?

It's interesting to note that the manufacture and ultimate weight of the bellows can actually have an impact on how an instrument feels and plays.  I have a friend who felt that the LH side of the box was rather heavy and causing him some discomfort...he paid a visit to Irish box player/repairman John Brosnan who suggested the bellows were actually the culprit, and a new set of bellows that were noticeably lighter made all the difference in the world.  One of John Brosnan's suggestions were to avoid ordering bellows that had the inside of the bellows folds taped over as well.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Ordering new bellows
« Reply #1 on: August 27, 2024, 06:29:18 PM »

Also, when specifying # of bellows folds, does that include the ends that attach to the bellows frame? 17+2= 19, or?
Logged
C#/D player

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Ordering new bellows
« Reply #2 on: August 27, 2024, 06:57:22 PM »

I believe deeper folds allow you to extend the bellows further. Not quite bellows twice as deep = twice as much extension, but hopefully you get the idea.

Let me know how it goes. I was looking into ordering bellows from them just the other week, but got confused by their pricing/ordering form.
Am I right to think that you not only have to pay for the bellows order for the given size, but you're also paying their retail prices for corners, leather squares, tape per meter, etc on top of that?
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Ordering new bellows
« Reply #3 on: August 27, 2024, 07:21:00 PM »

We tested a fairly deep fold, something like 35 mm. I felt that it gave a sensation of used, supple bellows, that I usually don't feel with new box (which are quite stiff). But it was heavier though.

Addendum following Theo's comment below: the case was made to accomodate such depth, it wouldn't necessarily be suited for all accordions.
« Last Edit: August 28, 2024, 10:28:16 AM by -Y- »
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Ordering new bellows
« Reply #4 on: August 27, 2024, 07:27:44 PM »

Quote
Also, when specifying # of bellows folds, does that include the ends that attach to the bellows frame? 17+2= 19, or?

From the sketch on the order form, it seems the number to specify is the number of -folds- on the outside of the bellows, so yes, 17 folds would translate into 17+2 'panels' (for lack of a better word..).
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Ordering new bellows
« Reply #5 on: August 27, 2024, 08:05:28 PM »

Colin Dipper told me that deeper folds are better as you get more air.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Ordering new bellows
« Reply #6 on: August 27, 2024, 08:36:51 PM »

Virtually all two row melodeons need to have the minimum fold depth (27mm I think) otherwise you risk the outer valves on the chord or bass blocks catching on the inside of the bellows and getting damaged.  This is especially true if you curve the bellows while playing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Ordering new bellows
« Reply #7 on: August 29, 2024, 01:19:19 PM »

Quote
Also, when specifying # of bellows folds, does that include the ends that attach to the bellows frame? 17+2= 19, or?

From the sketch on the order form, it seems the number to specify is the number of -folds- on the outside of the bellows, so yes, 17 folds would translate into 17+2 'panels' (for lack of a better word..).

Apparently it’s the total number of bellows folds including the ends since even theyare full plys.


Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal