Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Troubleshooting Erica keyboard install  (Read 2912 times)

0 Members and 2 Guests are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Troubleshooting Erica keyboard install
« on: September 03, 2024, 09:35:28 PM »

I recently purchased a new, original Hohner Erica keyboard part + bolts from a local Hohner dealer.  I'm having problems with the install.

Photo# 1: this is the keyboard seated properly against the frame, at the correct angle, with the angle that the accompanying bolts would screw into the keyboard (into the sleeve inside the keyboard).

Photo#2: this is the angle of the bolts when they come out of the frame of the accordion (screwed from the inside) - 90 degrees.

Photo#3: as a result, when the keyboard is fastened to the frame, this is the angle that it takes - 90 degrees.  Keyboard is not seated properly against the frame.

Is this a common problem for replacement Erica keyboards?  As far as I can tell, the issue is that the angle that the bolts take through the frame is 90 degrees rather than matching the angle of the keyboard (and the threads in the keyboard that would receive the bolts).  What's the easiest solution to this? Plugging up the holes in the wooden frame and re-drilling at an angle would be too much of a crapshoot - no way of getting things to line up precisely.  The keyboard end has a metal channel with threads already cut into it.  Drill out the entire thing and put a wooden dowel in there? That seems messy and risky...surely there's a better way!
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Troubleshooting Erica keyboard install
« Reply #1 on: September 03, 2024, 09:38:36 PM »

FYI it's an original Erica body in the photos - it's just that the celluloid has been stripped off.
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Troubleshooting Erica keyboard install
« Reply #2 on: September 03, 2024, 10:04:34 PM »

It's the wrong keyboard!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Troubleshooting Erica keyboard install
« Reply #3 on: September 03, 2024, 10:58:59 PM »

The angle of the screws is a bodge on all Erica/pokerwork keyboards.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Troubleshooting Erica keyboard install
« Reply #4 on: September 03, 2024, 11:01:24 PM »

It's the wrong keyboard!

It's the original Hohner Erica keyboard part from Hohner.  I'm pretty sure the angle of the bolt going into the keyboard matches the angle of the keyboard on all Erica keyboards.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Troubleshooting Erica keyboard install
« Reply #5 on: September 03, 2024, 11:04:06 PM »

The angle of the screws is a bodge on all Erica/pokerwork keyboards.

How do they normally work? It's always seemed pretty straightforward to me when removing and reinstalling Erica keyboards - bolts/screws fasten snugly and the keyboard sits at the correct angle.  What's the solution here?
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Troubleshooting Erica keyboard install
« Reply #6 on: September 04, 2024, 06:55:20 AM »

If the supplier is local, then just go back and see if he has a better fitting one. For whatever the cost new was, you don't want to be messing around drilling the captive nuts out etc. Shoddy parts should never be accepted from a reputable company!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Troubleshooting Erica keyboard install
« Reply #7 on: September 04, 2024, 03:42:51 PM »

To be clear, there's nothing wrong with the Erica keyboard.  The part fits perfectly on the Erica body and sits at the correct angle.  The threaded sleeves that accept the keyboard bolts are in-line and parallel with the keyboard plane, so if you were to screw the bolts into them, they'd stick out the end parallel to the keyboard. The issue appears to be with how the keyboard bolts would fit through the Erica body.  They come out of the Erica body straight up, at a 90 degree angle to the fondo/soundboard. 

I've attached a diagram to show what I'm talking about.  It's obvious by looking at it why the keyboard would start to angle forward (ending up at nearly 90 degrees) once you start screwing the bolts into the threaded sleeves.  I can only assume that with most Ericas/Pokerworks, the bolts actually go through the Erica body at an *angle* that matches the angle of the keyboard rather than straight up at 90 degrees. I don't know why this Erica is the way that it is.  It's worth noting that when I first had this instrument several years ago, there was a replacement keyboard that was sitting at the incorrect angle (much like this new keyboard is wanting to do now).  That original replacement keyboard is long gone now, but I believe it was used in another instrument without issue.

My second diagram shows where, as far as I can tell, the bolt would have to go for the keyboard to be fastened properly.  This would involve either widening or partly drilling a new hole where the bolt passes through, and the use of a shim on the inside for the washer and bolt to fasten into and grab.  I would certainly welcome some feedback...
« Last Edit: September 04, 2024, 04:00:22 PM by mselic »
Logged
C#/D player

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Troubleshooting Erica keyboard install
« Reply #8 on: September 04, 2024, 04:40:55 PM »

You could drill a (slightly loose) hole at the correct angle from the fondo end, either all the way through or half way and drill another angled hole from the top too, hopefully they will meet head on, if not a small round file could help adjust alignment. Really the hole can be loose inside the block, as long as the entry and exit are reasonably tight. The angle is not as extreme as your sketch suggests (and the bottom hole would probably not be that close to the block edge), so I'm not sure a wedge would be needed. The bolt head is so small that using a large washer would spread the load, and tightening the bolt would tend to move the keyboard end of the bolt forward (toward the pallets) and the bolt head rearward, if this makes sense.

If it does not work, you can still destroy the blocks and make new ones.  (:)   
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Troubleshooting Erica keyboard install
« Reply #9 on: September 04, 2024, 05:04:38 PM »

... and a sketch. (with too much angle !)
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Troubleshooting Erica keyboard install
« Reply #10 on: September 04, 2024, 08:10:46 PM »

I guess the question is: do you fill the holes in the keyboard or the body to match the mated part? Personally I would fill the keyboard holes if the angle wasn't too extreme coming out of the body. We've been dealing with this angle while we try to produce Erica button boards. It's definitely wonky.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Troubleshooting Erica keyboard install
« Reply #11 on: September 04, 2024, 09:24:08 PM »

I guess the question is: do you fill the holes in the keyboard or the body to match the mated part? Personally I would fill the keyboard holes if the angle wasn't too extreme coming out of the body. We've been dealing with this angle while we try to produce Erica button boards. It's definitely wonky.

I think it's a plastic keyboard with threaded metal inserts so filling the keyboard holes  wouldn't work.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Troubleshooting Erica keyboard install
« Reply #12 on: September 04, 2024, 09:26:42 PM »

Could it have had a wooden keyboard originally? I imagine that a wooden one could have well been drilled at 90 degrees to the fondo.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Troubleshooting Erica keyboard install
« Reply #13 on: September 04, 2024, 10:59:20 PM »

As I mentioned it’s a bit of a bodge.  All Erica’s and pokerworks are like this though it’s less noticeable with a wooden keyboard.  Just fit the the keyboard, run up the screws and tighten and they will pull into place.  Provided the two blocks that the ends of the keyboard sit on are securely glued and flat on top then the keyboard will sit at the correct angle.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Troubleshooting Erica keyboard install
« Reply #14 on: September 05, 2024, 04:19:02 AM »

I guess the question is: do you fill the holes in the keyboard or the body to match the mated part? Personally I would fill the keyboard holes if the angle wasn't too extreme coming out of the body. We've been dealing with this angle while we try to produce Erica button boards. It's definitely wonky.

I think it's a plastic keyboard with threaded metal inserts so filling the keyboard holes  wouldn't work.

Correct.

Could it have had a wooden keyboard originally? I imagine that a wooden one could have well been drilled at 90 degrees to the fondo.

As this Erica is from the 1950s, the original keyboard was most likely wooden.  I wondered the same thing that you're suggesting, Winston.  It would explain a lot.

Tirpous - I'm thinking along the same lines as you.

As I mentioned it’s a bit of a bodge.  All Erica’s and pokerworks are like this though it’s less noticeable with a wooden keyboard.  Just fit the the keyboard, run up the screws and tighten and they will pull into place.  Provided the two blocks that the ends of the keyboard sit on are securely glued and flat on top then the keyboard will sit at the correct angle.

Theo - if you look at the sketches I made, you'll see why what you're suggesting is not physically possible on this particular instrument.  I made another sketch to illustrate why the keyboard is pulling up to a 90 degree angle when it's being screwed in.  It's not physically possible for the bolt to pass through a hole (channel) in the wooden block (the block is 3/4" tall or so) at a 90 degree angle on the Erica body and then enter the threaded sleeve in the keyboard at a different angle.  There's no wiggle room to 'bodge' it.  The wooden blocks on the Erica body are perfectly flat and the keyboard itself can rest on top at the correct angle - a perfect fit - but the channel in the wooden block and the channel in the threaded sleeve in the keyboard are at two different angles.

« Last Edit: September 05, 2024, 04:24:14 AM by mselic »
Logged
C#/D player

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Troubleshooting Erica keyboard install
« Reply #15 on: September 05, 2024, 08:57:05 PM »

I guess the question is: do you fill the holes in the keyboard or the body to match the mated part? Personally I would fill the keyboard holes if the angle wasn't too extreme coming out of the body. We've been dealing with this angle while we try to produce Erica button boards. It's definitely wonky.

I think it's a plastic keyboard with threaded metal inserts so filling the keyboard holes  wouldn't work.

Ah that changes things
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Troubleshooting Erica keyboard install
« Reply #16 on: September 05, 2024, 09:49:44 PM »

Winston, it looks like you were right.  I checked several old wooden Hohner keyboards that I have, and in each case the securing bolts screw into the keyboard at an angle, unlike the new plastic Erica keyboard in which the threaded sleeve is parallel with the face of the keyboard.  This would explain why an old wooden keyboard would have screwed into place at the correct angle in this old 50s Erica, whereas the new plastic replacement keyboard is a mismatch.  (see photos...note that I'm only demonstrating the angle of the fastening bolt...I'm well aware that the base of the keyboards in my examples are different from one another and are not interchangeable).

I don't have any older plastic Erica keyboards to compare with, but thinking back to those that I've worked with in the past, I have a feeling the threaded sleeve on those may have likewise been at an angle like the wooden ones, at least for any boxes with the fastening bolts that came up through the frame at 90 degrees.  With this new keyboard, since it is an original Hohner part from current production models, I'm assuming that current Ericas must have the fastening bolts passing through the body of the Erica at an angle (rather than straight up out of the casework at 90 degrees) to allow it to correctly mate up with its threaded sleeves.

Mystery solved!...now I just have to engineer this old box to accept the new keyboard...
« Last Edit: September 05, 2024, 10:09:22 PM by mselic »
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Troubleshooting Erica keyboard install
« Reply #17 on: September 06, 2024, 05:24:59 PM »

Success.  I drilled a new hole at the correct angle that exited at the same point as the original hole.  Although the shims are not strictly necessary, they do allow the bolt/washer to tighten snugly against the frame at the correct angle without having to press into and bury themselves in the fondo (which is the sloppy way that Hohner does it...).  They also plug up the original hole.  The keyboard now sits snugly in the right position!

Hope this thread can be useful for anyone that runs into a similar problem when swapping out keyboards.
« Last Edit: September 06, 2024, 07:42:00 PM by mselic »
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Troubleshooting Erica keyboard install
« Reply #18 on: September 09, 2024, 10:01:59 AM »

Those little wedges are lovely, nicely done!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal