Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning and varied pitch standards  (Read 2226 times)

0 Members and 2 Guests are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Tuning and varied pitch standards
« on: September 08, 2024, 06:36:10 PM »

Hi, I just spent a couple of hours tuning an old Hohner pressed wood containing a much more modern set of C/F T reedblocks… Well, the pitch of the reeds was somewhat all over the place, but taking the average, I’d say that the m bank was set at A442Hz with m+ at around 20+ cents at A4 (5+Hz). I decided to bring it down to A441 with 14 cents tremolo at A4 but in the end made a little less work for myself by setting the tremolo at 18 cents, which seems to be the classic Hohner sound anyway… I just got around to tuning the C row and thought I’d tune the C/G chord pair too (that’s all you need no?) and strangely the reeds on that side matched more closely A440, although bizarrely the G note was 10 cents flat on both the push and pull!.. What a mess, but anyway I’m getting there…

I’m wondering what other tuners use as their pitch standard, or whether it’s always A440 unless the owner specifies otherwise. Or alternatively, do you determine the pitch standard used for a particular instrument and tune to that?.. (I took the middle road it seems).
« Last Edit: September 08, 2024, 06:38:26 PM by Arnold »
Logged
Dancing about architecture since 1997

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Tuning and varied pitch standards
« Reply #1 on: September 08, 2024, 06:52:05 PM »

Accordions are tuned all over the place. Various Italians tune to 440, 441, 442, 443 and even 444.
Old German was 438, if memory serves me right.
Old Russian is the worst - around A=430, +/- 3 herz. because every factory used its own reference master plates.

Personally, I'm a 440 guy - standards exist for a reason.

The box I'm working on now really blew me away. The treble was tuned to A=440, while the bass was tuned to about A=431. Seemed to be all original, and played to death, so somebody must have been playing like this for 6 decades  :-[
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Tuning and varied pitch standards
« Reply #2 on: September 08, 2024, 07:09:46 PM »

I agree about the standard being for a reason… Trouble is if you’re in a room full of other box players (not a regular scenario, certainly C/F ;D)  playing at 442Hz or even higher when you consider m+!.. I was thinking that going with 441Hz would mean not sounding too sharp against the standard, or too flat against the box players…
Logged
Dancing about architecture since 1997

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Tuning and varied pitch standards
« Reply #3 on: September 08, 2024, 07:54:44 PM »

The great thing about standards are that there are so many.  ;)
Logged
Semper idem, sed non eodem modo

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Tuning and varied pitch standards
« Reply #4 on: September 08, 2024, 08:21:40 PM »

One thing to keep in mind is that ear ability to perceive pitch difference is in the ballpark of 5-6 cents (complex subject and there are exceptions like someone is bound to mention Mozart or their uncle Charlie could perceive 0.001 cent difference, but anyway... (:) ).

Another thing, a pair of reeds tuned one to 441 Hz and the other 18 cents above that (445.6 Hz) will sound to the ear as 9 cents sharp of 441 Hz (443.3 Hz).


Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Tuning and varied pitch standards
« Reply #5 on: September 09, 2024, 07:15:09 AM »

I think the general pitch difference threshold is closer to 4c, which puts 441 into "out of tune" category. Similarly, +4c musette is considered by some as "just sounding out of tune" rather than "wet".

Of course, if one is talking about an accordion orchestra with 3-voice Scottish musette boxes, half a dozen cents here or there won't make a difference, but for dry tuning 441 can sound "off" for many folks.
I don't think going 441 gives you a universal solution.

We should come up with a couple new standards >:E, specifically for wet-tuned and dry-tuned squeezeboxes.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal