Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed design vs Sound  (Read 3555 times)

0 Members and 1 Guest are viewing this topic.

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Reed design vs Sound
« on: September 12, 2024, 12:14:31 PM »

Listening to Hartwin and another gentleman Konstantin Klabunde (on YouTube), and it has struck me that both of these gentlemen play Castagnari Mas/Evos, LM instruments.  How does the M voice sound so thick? When I play on my friends PA in the M register, it sounds like a concertina, but when the Castas play in their M register it sounds almost like an american tuned MM reed set: very warm and luscious, though maybe lacking in tremolo.  Same thing with my pokerwork: if I tape off a reedset to play only 1 M reedset, it sounds quite similar to a concertina, nothing like a Casta.

In my mind, a reed is a reed is a reed... right? They may have slightly variations in their sound, but my understanding was 'higher end' reeds impact responsiveness more than tone.  How can a reed design provide such a luscious warmth from a single reed?  Or is this more a factor of the casework?
Logged

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Reed design vs Sound
« Reply #1 on: September 12, 2024, 01:25:50 PM »

There is definitely variation in how single reeds can sound. I recently spent quite a while comparing the sound of a single voice on my Loffet Pro (with Voci Armoniche reeds) to a Saltarelle Pastourelle III, and there was to my ear quite a big difference in the tone of the reeds. The ones in the saltarelle sounded more aggressive somehow (which is why I didn't keep it).
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed design vs Sound
« Reply #2 on: September 12, 2024, 02:38:54 PM »

In my mind, a reed is a reed is a reed... right?

No. There's the concept of reed "scale". I.e. how the reeds are shaped and sized for each note. And there's also stiffness/profile and reed material (type of steel, brass, nickel silver, phosphor bronze).
If you try making your own reeds, you start getting some ideas how these factors affect the timbre, but the relationship is quite complex. It's very easy to make two reeds for the same note that will be distinguishable in a blind test on tuning bellows. The reeds will have a different overtone content.

What's more, once you fit the reeds into a box (essentially, an acoustic filter), the differences in the overtone content can either become bigger or smaller.
And different de-tunings affect different reeds differently.
You might have heard folks saying that "there's the right tuning for every box" and I fully agree with this idea. For a given set of reeds and box, some de-tunings and reed combos will sound better than others.

So while the reeds are different to begin with, it's the holy trinity of reed-box-tuning that seems to shape what you hear.
« Last Edit: September 12, 2024, 02:40:32 PM by mChavez »
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed design vs Sound
« Reply #3 on: September 12, 2024, 02:42:15 PM »

There is definitely variation in how single reeds can sound. I recently spent quite a while comparing the sound of a single voice on my Loffet Pro (with Voci Armoniche reeds) to a Saltarelle Pastourelle III, and there was to my ear quite a big difference in the tone of the reeds. The ones in the saltarelle sounded more aggressive somehow (which is why I didn't keep it).

To prove that was only a difference in the reeds themselves, you'd have to swap the reeds between boxes and listen to the result.

Different reeds will sound different, but the reed chambers and surrounding case design also affect the sound. On most two row boxes, for example, the outer row reeds sound brighter than the inner row on the same box because they are nearer the front of the grille. (some boxes are designed to compensate for this)
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Reed design vs Sound
« Reply #4 on: September 12, 2024, 02:49:39 PM »

Listening to Hartwin and another gentleman Konstantin Klabunde (on YouTube), and it has struck me that both of these gentlemen play Castagnari Mas/Evos, LM instruments.  How does the M voice sound so thick? When I play on my friends PA in the M register, it sounds like a concertina, but when the Castas play in their M register it sounds almost like an american tuned MM reed set: very warm and luscious, though maybe lacking in tremolo.  Same thing with my pokerwork: if I tape off a reedset to play only 1 M reedset, it sounds quite similar to a concertina, nothing like a Casta.

Funny how it changes from one person to another, playing a Castagnari myself, I almost never play the M reed alone, precisely because I find the sound too "narrow" for my taste (far, far, far from having a "thick" sound actually), but without having the great expressiveness concertinas have. And I have the same feeling when listening to nearly every LM set-up, irrespective of the brand. The only time I had not felt that was on a big Maugein chromatic accordion, I assumed that it had to to with the box size.

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Reed design vs Sound
« Reply #5 on: September 13, 2024, 03:51:03 AM »

Huh, well, maybe I am mishearing things.  It certainly doesn't sound like there is a low reed playing (i.e. LM), but maybe I am mistaken.  The Casta Evo and Mas are indeed just LM boxes, right?

Take a listen to the clip on youtube here: https://www.youtube.com/watch?v=Fui0Ylk189Q

Is that truly just a single M reed?  It sounds much richer than a Hohner reed, somehow. 


Are there any simulators that you know of that reproduce reed tonality based on different parameters?  Like, if we make the reed tongue thicker or wider it produces such and such a tone.  This all quite fascinating... I suppose I have only played a handful of different accordions, and with the exception of the Hohner H reeds I have in an old pokerwork, they all sound fairly similar.  The reeds in the clip above sound closer to the old hohner, but vastly more warm (relative to say, the PA's single reed which sounds like a concertina, thin almost nasally).
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed design vs Sound
« Reply #6 on: September 13, 2024, 07:00:33 AM »

Not that I'm aware of. As I said, the whole system is extremely complex, and there's far too many parameters at play.
A general observation I made while making test reeds is that for a given material, stiffness and pitch we can change the size & shape. Wider & closer to a rectangle = smoother, warmer sound with fewer overtones. Thinner, more pointed = more high-frequency overtone content.
For a given reed material, size, shape & pitch we can change the stiffness. Higher stiffness = harsher sound; lower stiffness = smoother sound.

Higher stiffness (with smallest fitting gaps) is critical to (objective) reed response & dynamics.

But there's lots of factors that come together in the end. Potentially, plate material (aluminium, zinc, brass), reed slot relief. Reed material definitely makes a difference, but while you can easily distinguish between brass and steel, you can't see their "grade" (or, more importantly, stiffness to weight ratio), etc.

And once you've fitted them inside a box you're applying acoustic filters that will not necessarily have the same effect on how our ear perceives different reeds or different tunings.
Logged

Aaron Wildman

  • Member
  • *
  • Offline Offline
  • Posts: 36
Re: Reed design vs Sound
« Reply #7 on: September 13, 2024, 01:55:16 PM »

YouTube audio is misleading at best.  Not to mention any eq used. 

I bet if you say right next to the player in real life, or better yet, play the instrument yourself, you would change your mind quickly about how much better player x's equipment sounds.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Reed design vs Sound
« Reply #8 on: September 16, 2024, 08:31:26 PM »

I keep thinking about this topic and just wanted to add a couple more points:
I had the pleasure of having Hartwin Dhoore teach us some tunes at the DG Melodeon Weekend in Halsway Manor a year ago in May.
His box sounds absolutely glorious, so much so that it really got several in the class seriously thinking about the Mas and heading towards the trade stall there to see if he had one on the stall.
It is rich and luxurious and in the hands of such a player, I can understand the OP's questions regarding the sound from it.

There are a couple of thoughts about his Mas that might contribute towards his sound.
I have a feeling his is a GC.
A friend who also was there at the weekend with me some time later tried a DG Mas and didn't think it had such a resonance, and headed for a Rik instead.
The Mas has a baffle according to the info on the Castagnari website. I have no idea how it works or what effect it has on the sound, and ... ummm... am quite baffled about it ( sorry, couldn't resist  ;) )
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed design vs Sound
« Reply #9 on: September 16, 2024, 09:28:40 PM »

The Castagnari baffle is removable. I imagine it's for quieter practice times.
I think they call it a sordino.
Here's a picture from the Castagnari website which shows the end of the baffle at the bottom of the treble side.
It slides out from the bottom.

https://castagnari.com/prodotto.html?id=5&k=20
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed design vs Sound
« Reply #10 on: September 16, 2024, 09:54:08 PM »

There's a few ways to modify the sound when it's making its way out of the soundholes, but it's a separate science (or black magic) to the reed timbre.

Cassotto makes the sound bounce off a wall in a resonance chamber (usually at about 90 deg to the grille, although there's 180 deg versions in accordion world). It really smoothes out the higher partials.

Sordina is simply an extra baffle (usually made in a such a way that when it's closed, there's no direct path for the sound waves to escape the box. The effect is somewhat different to cassotto, and sound a bit more like the sound is coming from the bottom of a well). It makes the sound quieter (unlike cassotto, which often makes it louder & more projective). Bass-side sordina can be quite an asset, as it provides a way of re-balancing the right-left volume.

There's a way of putting one voice on a set of separate pallets so the sound exits underneath the keyboard & gets filtered differently compared to the "outer" voices. Can't remember the name for it. It was used in Shand Morino and some old high-end Paolos, before cassotto became a standard feature of a high end accordion.

Various grille designs filter the sound waves differently.

Pad lift plays a role too - there's a bit of a sweet spot when the pad is open enough so that the pitch stability is not negatively affected, yet, some of the higher partials are filtered out.

One thing to keep in mind, is that all these methods modify the frequency spectrum that's coming off the reed. If you use a smoother reed to begin with, there's less need to try & modify the timbre.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed design vs Sound
« Reply #11 on: September 16, 2024, 09:58:53 PM »

PS Ben has "Tula Bayan" is his signature. Is that a mass-produced, harsh, squeaky & squealy Tula with factory reeds, or is that a professional-level Tula with hand-made reeds on solid plates?
If it's the latter, then you can tape off the second M and see just how rich and velvety smooth a single M can sound when the reeds really mean business.
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Reed design vs Sound
« Reply #12 on: September 16, 2024, 10:04:29 PM »

Thanks both, yes I think I remember the baffle being removable but wasn't sure how it modified the sound.
Quietening it for practice sounds like a good explanation.
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Reed design vs Sound
« Reply #13 on: September 22, 2024, 03:38:04 AM »

PS Ben has "Tula Bayan" is his signature. Is that a mass-produced, harsh, squeaky & squealy Tula with factory reeds, or is that a professional-level Tula with hand-made reeds on solid plates?
If it's the latter, then you can tape off the second M and see just how rich and velvety smooth a single M can sound when the reeds really mean business.

I should probably update it, its a Tula Etude 100, one of the mass market steel reeds.  The reeds sound better than my friend's PA, just more full (but the Etude is a very dry MM vs his M/LM, so a grain of salt there).  Those russian bass reeds are gloriously low and thick sounding, but also heavy and just drink air like whiskey the day before prohibition. Very physically demanding to play.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Reed design vs Sound
« Reply #14 on: September 22, 2024, 07:21:07 AM »

An Etude would be quite squeaky compared to high end hand-made reeds, that tend to be silky smooth.
I'm a big fan of oversized basses! The air consumption on soviet factory reeds is an issue of quality rather than design (the gap between the reed and the slot walls can be up to a millimetre ( :o) if you get a Friday afternoon job). With hand-made stuff you get tightest gaps imaginable - the reeds can be even longer & twice as wide as the factory jobbies, yet, the air consumption is reasonable.
Logged

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Reed design vs Sound
« Reply #15 on: December 11, 2024, 05:40:54 PM »

he air consumption on soviet factory reeds is an issue of quality rather than design (the gap between the reed and the slot walls can be up to a millimetre ( :o) if you get a Friday afternoon job).

That is insane! The bass reed blocks were glued onto the fondo (not waxed on, glued), so I was never able to pull them out to look at the gaps.  But if the gaps were even 0.5mm, that would explain why it was so loose.

I just ended up selling it to a Kazakh gentleman who was wanting something more historic than playable. 
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal