Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Grille inspirations?  (Read 2141 times)

0 Members and 1 Guest are viewing this topic.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Grille inspirations?
« on: September 15, 2024, 08:41:11 PM »

Hi all.

Do any of you have photos of inspiring flat wooden grille designs? I'll need to start thinking about making a grille for my current build soon.
Ideally, something that can be routed with a 6mm ball-bearing bit, following a lasered template, but I'll be happy with any suggestions.

Treble & bass.

Cheers!
Logged

Andy Goldfinch

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 150
    • Andy Goldfinch Melodeon (YouTube)
Re: Grille inspirations?
« Reply #1 on: September 16, 2024, 08:14:05 AM »

I think all the ones that Marc Serafini has on his site are interesting designs
Logged
D/G Castagnari Dony, D/G Hohner Club VII (9 bass), D/G Serenellini Maestro, C/F Hohner Club II (DIY restoration in progress...)

https://www.youtube.com/@andymelodeon

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Grille inspirations?
« Reply #2 on: September 16, 2024, 10:03:53 PM »

Thank you.
I had a Serafini box, so familiar with these designs.

Call me old-fashioned, but I don't like the modern trend for extensive use of the laser cutter esp for outside parts.
In fact, I can't say I particularly like some of the very highly figured fretwork on vintage boxes either (albeit I acknowledge the high amount of skill it took to make them back in the days).
I certainly don't want something that screams "Hey, look, I've got a laser cutter", especially when I don't own one myself :-\ And there's an added issue of laser-burnt edges.

...But I don't want something that screams "Hey, look, I only have a router table" either. :D
Logged

Mandomentch

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Grille inspirations?
« Reply #3 on: September 17, 2024, 01:48:35 AM »

I made this grill from Black Walnut with thin maple strips for the strands of the web. The spider, fly and edge trim are composed of several kinds of pearl, celluloid and other materials. The inlays and pierced design were all cut by hand using a jeweler's saw. The back side of the panel is covered with acoustically transparent black speaker cloth.

The accordion itself is a 2-voice C#/D constructed in 1998 by Paddy Clancy & Michael Searson at their old shop in Rathkeale, Co. Limerick
« Last Edit: September 17, 2024, 07:16:01 PM by Mandomentch »
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Grille inspirations?
« Reply #4 on: September 17, 2024, 06:59:50 AM »

That is a mindblowingly stunning grille!
Logged

Mandomentch

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Grille inspirations?
« Reply #5 on: September 17, 2024, 02:26:08 PM »

You are very kind....thank you.

As you might imagine; that project was labor intensive.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal