For the early, pre-114 single row melodeons, im seeing some with wood block action under the buttons, and some with metal action like a 114. And forgive if im using the wrong terms, trying to learn. Is there any big dis-advantage to the open action? Ive attached two images of each design.
Hi James, welcome to melnet!
The two photographs I can see both show instruments with wooden actions. One has an open keyboard - and you can see the full length of each key exposed. The other has a closed keyboard, in which the top part of the key, except for around the area where the pallet arm is fixed in, has been trimmed down. The buttons are then glued onto the top of the key lever and a deck of thin wood is fitted over the keyboard block and glued into place.
Some open keyboards have mother of pearl buttons screwed onto the top of the lever - Your upper picture shows this feature. It is difficult to slide from key to key with these buttons so they encourage a finger hammering playing style.
Hohner appear to have introduced their design of metal action which is screwed to the fondo and independent of the keyboard circa 1927. In the wooden action the keyboard "block" carries the axle that the keys are threaded onto. Some of the other manufacturers were using metal actions of various designs (usually patented designs) from the 1890's.
Metal actions are more suited to mass production but many of the high end Italian models of today still have wooden actions.