Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: WAX FOR CELLULOID QUESTION  (Read 2993 times)

0 Members and 1 Guest are viewing this topic.

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
WAX FOR CELLULOID QUESTION
« on: December 04, 2009, 02:55:10 PM »

If one wants to upkeep the nice shiny surface of the celluloid, buff minor surface scratches, what type of product/wax  would one use?

Thanks!

Mario
*******************************************************
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: WAX FOR CELLULOID QUESTION
« Reply #1 on: December 04, 2009, 03:04:28 PM »

Hi.
I've used autoglym car polish with good results,there is also a product that is slightly abrasive to remove scratchs but be very carefull.Braso will also remove scrathes but in both cases use a soft cloth '.
Also works great on my daughters Bridge electric violins

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: WAX FOR CELLULOID QUESTION
« Reply #2 on: December 04, 2009, 03:17:31 PM »

Yep, good quality car polish works on most shiny surfaces! You can even try "rubbing compound" to remove scratches.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: WAX FOR CELLULOID QUESTION
« Reply #3 on: December 04, 2009, 10:24:14 PM »

At last! A use for that tin of car polish my wife bought me once.  :|glug
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: WAX FOR CELLULOID QUESTION
« Reply #4 on: December 05, 2009, 11:53:22 AM »

If you're thinking of going down the cutting compound route, then T-Cut is a good start.  But for a finer finish, if required, I would recommend Farecla compound.  It is much finer than T-Cut and can yield a truly mirror like finish.

Rob.
Logged

dr.harp

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: WAX FOR CELLULOID QUESTION
« Reply #5 on: December 05, 2009, 02:39:47 PM »

What I use when repairing celluloid is jewellers rouge on a buffing wheel. One needs to be careful though to not run a buffing wheel over the gold embossing nor to allow the wheel to remain in one spot for too long as the heat build-up can damage the celluloid.
Logged
Owner of Wilson Music Services - Repairs to accordions and harmonicas, specializing in Hohner.

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: WAX FOR CELLULOID QUESTION
« Reply #6 on: December 05, 2009, 02:42:53 PM »

OK, thanks guys, I guess "Car polish" wins.  Now let's see if THEO gives it his seal of approval! ;-)

Of course, I'm sure it probably always is a good idea to read the instructions on the tin as well as trying a bit of wax on a hidden corner of the box "just to make sure" the whole deal works out.

Thanks for all your inputs! :-)

Mario
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: WAX FOR CELLULOID QUESTION
« Reply #7 on: December 05, 2009, 02:47:42 PM »

Hey dr.harp, glad to have you onboard!.  "Jewellers rouge", that's interesting, I guess that is some type of polishing compound that you can buy only at the jeweller?
*********************************************************
What I use when repairing celluloid is jewellers rouge on a buffing wheel. One needs to be careful though to not run a buffing wheel over the gold embossing nor to allow the wheel to remain in one spot for too long as the heat build-up can damage the celluloid.
« Last Edit: December 06, 2009, 03:27:29 AM by callmemario »
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: WAX FOR CELLULOID QUESTION
« Reply #8 on: December 08, 2009, 04:38:00 PM »

I use brasso for the rough polish if needed, and Turtle Wax Nano for the fine buff - both on soft cotton rags, obviously.
Logged

Gandy

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 407
Re: WAX FOR CELLULOID QUESTION
« Reply #9 on: December 08, 2009, 08:52:32 PM »

Toothpaste is a useful polish for some plastics. 
Logged
Tony S
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal