Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Club X 10 Bass To 12 Bass  (Read 1318 times)

0 Members and 1 Guest are viewing this topic.

Brian Cordeiro

  • New Starter
  • Offline Offline
  • Posts: 2
Hohner Club X 10 Bass To 12 Bass
« on: November 03, 2024, 11:50:55 AM »

Hey everyone I hope everyone is doing well. I have a hohner club x and it has 10 on the bass side I would love to convert it to a 12 bass and a 33 treble side diatonic accordion. If anyone can point me in the right direction if this is possible I would greatly appreciate it.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner Club X 10 Bass To 12 Bass
« Reply #1 on: November 03, 2024, 01:56:00 PM »

I'm working on a 10 bass to 18 bass at the moment.
I'm using some of the mechanics and reedblocks from a Verdi III piano box.
A lot of the work has been done but I'm at the stage of sorting out the rods. I had planned on using a cut down stradella but in the end it'll probably be rods like a pokerwork.
The holes are drilled and the fondo altered together with recut reedblocks.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: Hohner Club X 10 Bass To 12 Bass
« Reply #2 on: November 03, 2024, 05:09:33 PM »

Hey everyone I hope everyone is doing well. I have a hohner club x and it has 10 on the bass side I would love to convert it to a 12 bass and a 33 treble side diatonic accordion. If anyone can point me in the right direction if this is possible I would greatly appreciate it.
Hello Brian,
I am converting an 8 bass Club to 12 bass. I found an old, non stradella,  piano accordion mech and used that. One thing I would suggest, while you are doing the job, is putting in two stops to remove the lower bass note and the thirds. I made a new plywood fondo, and stop mechanism using my laser cutter, but it is a simple project and can be done easily with hand tools.
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner Club X 10 Bass To 12 Bass
« Reply #3 on: November 03, 2024, 06:58:55 PM »

Club X, and the higher-end model 235 are great boxes that are a pleasure to squeeze. I'd just leave as is.

You can get 12 bass * 33 treble Hohner config in their "Morino" series. You also get a double cassotto on the treble side, oversized reeds (in the original, German-built ones) for the lowest bass fundamental & oversized 180-degree reed chambers.
Logged

Brian Cordeiro

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Hohner Club X 10 Bass To 12 Bass
« Reply #4 on: November 04, 2024, 11:08:30 AM »

I been trying to look for a morino iii model but I can’t find any
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner Club X 10 Bass To 12 Bass
« Reply #5 on: November 14, 2024, 07:19:39 AM »

I don't think there's a diatonic Morino III. Unless you're talking pre-club Morino days, in which case those boxes are extremely rare.

The equivalent is the "original" german-built, Hohner-designed Club Morino from the 50s-early 60s, before the production got outsourced to Italians and the box got redesigned (imho) into a lesser instrument.
Logged

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Hohner Club X 10 Bass To 12 Bass
« Reply #6 on: November 14, 2024, 04:46:27 PM »

I am converting an 8 bass Club to 12 bass. I found an old, non stradella,  piano accordion mech and used that. One thing I would suggest, while you are doing the job, is putting in two stops to remove the lower bass note and the thirds. I made a new plywood fondo, and stop mechanism using my laser cutter, but it is a simple project and can be done easily with hand tools.
Dave

Looks great Dave! How are you sealing the slides crossing over the air hole?  And a great idea using an old 12-bass PA.  I assume the bass end will still be bisonoric?
« Last Edit: November 14, 2024, 08:28:14 PM by Ben »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal