Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Convert Hohner Club 8bass to 12bass?  (Read 1544 times)

0 Members and 1 Guest are viewing this topic.

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Convert Hohner Club 8bass to 12bass?
« on: November 11, 2024, 02:42:30 PM »

Anyone ever done it?

I haven't seen the inside of the bass mechanism of any hohner clubs, but I assume it is somewhat similar to their pokerworks'. Would it be possible to swap it out with something from say, a corona's bass mechanism and reed blocks to get the extra 4 bass buttons?

EDIT: Sorry, looks like there quite a few other threads about this.  I haven't seen any pictures, however, of the inside.  Anyone have some pictures of the bass mechanism of their IIIM or IIIBS, ideally before modification if they have done it?  (After too would be great!)
« Last Edit: November 11, 2024, 03:24:22 PM by Ben »
Logged

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Convert Hohner Club 8bass to 12bass?
« Reply #1 on: November 11, 2024, 05:09:02 PM »

After some more research, it seems like this should be fairly easily possible... I say now. 

1) Buy a Corona bass mechanism (similar to what is used in the panther), and a FBbEb* set of bass reeds from the panther/corona. 
2) Take out the old club bass mechanism. 
3) Fill the existing holes in the fondo with dowels and wood filler, if needed
4) Drill out new holes per new reedblocks in fond0 and case
5) install Corona bass mechanism (replace corona buttons with club-style buttons?)
6) Remove all reed plates from all blocks, wax in old club reeds into new bass block.
7) Retune G/C reeds from new set to G#/C#, and Eb/Bb to E/B
8 ) Wax in retuned reeds, and fine tune reeds
9) Tape off thirds.
10) ??
11) Profit?

*or just get GCF reed blocks, and avoid steps 6, 7 & 8

Am I off my rocker here?  A lot of the other posts I have seen, people are building new reed blocks etc, which seems a bit extreme to me.  Do Corona reedblocks just not fit or something?
Assuming I go the FBbEb route, this would give every bass/chord possible, granted with very few reversals.  Coupled with a 30button club, this seems like a potent machine. (FYI, I mainly play cross-row).
« Last Edit: November 11, 2024, 07:07:20 PM by Ben »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Convert Hohner Club 8bass to 12bass?
« Reply #2 on: November 11, 2024, 05:36:16 PM »

I’ve looked at the possibility of this.  The only slight awkwardness I noticed is that on the base of the chord reedblock the air vents are in groups of three for each chord.  The Corona groups are out of sync with the existing holes in the club fondo.  You could get round this by taking the sole plate of the Corona block and turning it over which would allow the holes to match up.  You would also have to remove and reattach the wood blocks that hold the reed blocks in place, and of course make some new holes for the additional reeds. This applies to Corona 2 blocks in smaller club models.  Corona 3 and some larger club models have 4 reeds per chord and the design of the blocks is different.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Convert Hohner Club 8bass to 12bass?
« Reply #3 on: November 11, 2024, 05:46:44 PM »

Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Convert Hohner Club 8bass to 12bass?
« Reply #4 on: November 11, 2024, 06:22:07 PM »

Thanks for the reply Theo.

Flipping over the base plate doesn't sound so bad (i say that now!).  Use a bandsaw to separate it, smooth it out, flip it over and glue it back on.

Do you know if the Club IIIM/IIIBS reed blocks match up to the Corona 2 blocks? (aside from the afore-mentioned base plate flip, naturally).  It looks like the Club 1B shares the Corona II reed blocks, but the Club III models look to have 4 octave bass vs the Club 1B 2 octave.  I am expecting/planning on only having 3 reeds per chord, minus the thirds; the thinner chord sound - e.g. pokerwork with taped thirds - is much more to my liking.

Here's what I did a few years ago
https://forum.melodeon.net/index.php?topic=25087.msg298648#msg298648

I did see this! Thank you! Did you ever end up doing this on the IIIM/BS you mentioned?  How did that go/how did it differ from this write up?  The IIIM/BS having the quasi-stradella system does give me a little pause, since I genuinely have no idea how that looks relative to a more familiar Corona/Pokerwork style.  I have opened up a couple stradella 100 bass systems before to fix stuck keys etc, but this being a quasi-system... it has me perplexed with how it would differ.

Squeaky Pete, why did you opt to create new reed blocks vs using repurposed blocks from a Corona?
« Last Edit: November 11, 2024, 07:10:31 PM by Ben »
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Convert Hohner Club 8bass to 12bass?
« Reply #5 on: November 12, 2024, 08:41:15 AM »

Ben, the Corona blocks are for 3 note chords and the Victoria has 4 note chords with the 2 octaves of the root of the chord shared with the bass buttons so you always have 4 notes (bass and chord).
I could have stuck a half block on to the original block, but I didn't think that was sensible or reliable. I have reasonable machinery and have been a cabinet maker all my working life so it looked easier to just make exactly what I wanted.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Convert Hohner Club 8bass to 12bass?
« Reply #6 on: November 12, 2024, 01:56:38 PM »

Ben, the Corona blocks are for 3 note chords and the Victoria has 4 note chords with the 2 octaves of the root of the chord shared with the bass buttons so you always have 4 notes (bass and chord).
I could have stuck a half block on to the original block, but I didn't think that was sensible or reliable. I have reasonable machinery and have been a cabinet maker all my working life so it looked easier to just make exactly what I wanted.

That makes total sense to me!

I am not super thrilled with the 4 note chord.  It is fine, but it sounds too... old-time accordion, too big of a sound.  Odd, saying that, considering it is an accordion.  But I love the smaller sound of, say, the pokerwork's bass end vs a big fat Club Morino, for example.  That one of the reasons I am considering filling all of the existing holes in the fondo and replacing the entire mechanism and blocks with a corona bass end, assuming it all fits.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Convert Hohner Club 8bass to 12bass?
« Reply #7 on: November 12, 2024, 03:08:05 PM »

I'd put a new fondo in and redrill to suit the Corona blocks. Filling will ultimately fail.
Although I have 4 notes for the chord buttons I doubled the 5ths so it gives 2 roots an octave apart and 2 5ths an octave apart. Actually I think in one case the 5th is doubled as I couldn't find a a reed that didn't sound too shrill.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Ben

  • Good talker
  • **
  • Offline Offline
  • Posts: 61
  • Hohner G/C, Pokerwork D/G, B/E, Club IIIB S C/F,
Re: Convert Hohner Club 8bass to 12bass?
« Reply #8 on: November 14, 2024, 06:39:17 PM »

I'd put a new fondo in and redrill to suit the Corona blocks. Filling will ultimately fail.
Although I have 4 notes for the chord buttons I doubled the 5ths so it gives 2 roots an octave apart and 2 5ths an octave apart. Actually I think in one case the 5th is doubled as I couldn't find a a reed that didn't sound too shrill.

Good suggestion.  Thanks!

Once I get my box from Scott Bellinger and get some aesthetic bits and bobs restored (celluloid, re-tapping), then this is first on the docket.  I will be sure to create a new thread (hmm youtube playlist?) of the modification progress.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal