Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed overhaul to put things in perspective...  (Read 2674 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Reed overhaul to put things in perspective...
« on: November 19, 2024, 03:28:35 AM »

In case anyone's ever daunted at the prospect of overhauling an Erica or Pokerwork, I hope this helps. Here's what's in my shop at the moment: an old Paolo, *5* voice PA (that's 5v on both treble and bass sides) with a whopping 530 reeds...

 :Ph
« Last Edit: November 19, 2024, 03:31:16 AM by mselic »
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reed overhaul to put things in perspective...
« Reply #1 on: November 19, 2024, 09:12:15 AM »

That's going to need an awful lot of coffee.....
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed overhaul to put things in perspective...
« Reply #2 on: November 19, 2024, 06:23:33 PM »

…and if you need to sharpen each and every one as I did last year on a full sized 5 voice bass 4 voice treble Hohner which was tuned to 435 or something flatter than 440…. It's a big …big…long…big (and expensive) job. And you can't listen to a podcast while you tune either….but your tuning gets to be efficient…
I generally avoid and or try and talk people out of complete refurbish of a 41/120 but it often seems to encourage them.
« Last Edit: November 19, 2024, 06:26:46 PM by Rog »
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reed overhaul to put things in perspective...
« Reply #3 on: November 19, 2024, 06:42:59 PM »

Quote
That's going to need an awful lot of coffee.....

There's still (a little) space left on the bench for a cup, fortunately !  (:)

Nice workspace and organizer trays !
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed overhaul to put things in perspective...
« Reply #4 on: November 22, 2024, 10:03:09 PM »

…and if you need to sharpen each and every one as I did last year on a full sized 5 voice bass 4 voice treble Hohner which was tuned to 435 or something flatter than 440…. It's a big …big…long…big (and expensive) job. And you can't listen to a podcast while you tune either….but your tuning gets to be efficient…
I generally avoid and or try and talk people out of complete refurbish of a 41/120 but it often seems to encourage them.

The tuning of this one was all over the place...it's hard to even interpret what the original, intended tuning would have been.  The L and H reeds didn't seem to be in-line with the on-pitch M reeds.  Coupled with a very wide tuning between the MMM reeds, it sounded dreadful!  I'm not looking forward to tuning it...I also have cassotto reedblocks to tune which, as far as can tell, can only be tuned *outside* the instrument.  Bah!

It's hard to get motivated for jobs like this one, Rog...
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed overhaul to put things in perspective...
« Reply #5 on: November 24, 2024, 12:17:41 PM »

eek...Cassotto...
In conversation with Emilio Allodi a few weeks ago (he's retiring...but well known in London etc for his work and his shop), we both agreed there are certain things to avoid if possible...leaking pallets inside a cassotto is definitely one of them (v difficult to fix), any CBA keyboard issue (because those buttons have to come off). Tuning the cassotto reeds is ok if it's spot tuning..but if they are all over the place...oo er. Like you say...it's sometimes hard to get motivated.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed overhaul to put things in perspective...
« Reply #6 on: December 06, 2024, 06:06:59 AM »

This job just about did me in...30 hours of labour and it's finally done.  Full reed overhaul and slider assembly rebuilt.  Yeesh.

Not touching the cassotto pallets.  Roger, out of curiosity, did you ever successfully deal with leaking cassotto pallets?  I found one that was leaking a bit of air but I ain't going anywhere near trying to sort out that nonsense!  Without access down there, I can't figure out how anyone could get those to seat properly without throwing everything else off.

Minutes after I'd finished this job, another client walked in with a 4v, full-size PA that needed a full overhaul.  Fortunately, upon hearing estimate cost of work, they abandoned the instrument right then and there!
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed overhaul to put things in perspective...
« Reply #7 on: December 06, 2024, 06:11:01 AM »

Also, here's a pic of the tiniest accordion piccolo reed.
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed overhaul to put things in perspective...
« Reply #8 on: December 06, 2024, 09:29:22 AM »

I expect that will file up a full tone if need be. Haha!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Reed overhaul to put things in perspective...
« Reply #9 on: December 06, 2024, 01:13:37 PM »

From the looks of that box it was well worth the effort...
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed overhaul to put things in perspective...
« Reply #10 on: December 06, 2024, 08:41:21 PM »

Quote
did you ever successfully deal with leaking cassotto pallets?
I can't remember. I might have got lucky. I think i managed to loosen the pallet somehow (held on with wax) and reseat it. But I see cassotto so infrequently.
Did you need to much tuning? I often find that a refurb with cleaning brings it back close to where it started, and only a bit of spot tuning is needed.
I've just done a 3 voice 48 bass and that seemed to take forever too…

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed overhaul to put things in perspective...
« Reply #11 on: December 08, 2024, 09:17:31 PM »

Oh, it took a *lot* of tuning.  Obviously all 530 reeds had a going over, but the H reeds were generally flat by about 15-20 cents and the L reeds were sharp by the same amount.  It looked like they had been tuned this way intentionally from factory when the instrument was built for someone.  Due to the sheer size and weight of this behemoth, I ended up tuning all the blocks outside of the instrument, which necessitated taking readings of each reed both in and out of the instrument and calculating the difference...I ended up with 12 pages of charts! It made sense in this case but it's not how I'd like to tune most accordions.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reed overhaul to put things in perspective...
« Reply #12 on: December 10, 2024, 05:09:45 AM »

I can't tell you how happy I was to have this wee thing as the next instrument in my shop following that massive PA...stripped, re-valved, waxed back in and tuned in less than a day...that's more like it!
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal