Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Lilliput question  (Read 1103 times)

0 Members and 1 Guest are viewing this topic.

Fiona Frank

  • Member
  • *
  • Offline Offline
  • Posts: 5
Lilliput question
« on: November 22, 2024, 11:22:04 PM »

Hi I have a two and a half row lilliput in gd. Every so often I have to take it apart and replace the right hand blocks in their place as they jump out of place occasionally . Which made me think, would it be possible to buy new blocks and have it as an occasional DA box instead of GD ?
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Lilliput question
« Reply #1 on: November 22, 2024, 11:45:51 PM »

You probably mean A/D, not D/A,, but yes, sometimes blocks are interchangeable like that, but going down a whole 4th you might find the blocks are bigger because the reeds are bigger, so they won't fit.
Also, don't forget you'll have to change the bass blocks too.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Lilliput question
« Reply #2 on: November 23, 2024, 11:04:53 AM »

they should not move.Thats unusaul if the end fixings are tight . You might have clearence to spin them in one more turn with the blocks removed  or fit a hard leather shim, or bend be carefull but first , are all the wedges on the fondo there?They stop the blocks moving sideways. Especially the top and bottom ones . Four in total glued on to the fondo face /sound board if they are not you might see little glue marks were they once were.
PS the block are interchangable as in a powkerwork
« Last Edit: November 23, 2024, 11:08:15 AM by folkloristmark »
Logged
Mark Taylor
Folkloristmark

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Lilliput question
« Reply #3 on: November 23, 2024, 04:17:36 PM »

Maybe you already know this, but just in case:

As far as I know, Liliputs were only made in C/F and Eb/Bb tuning, and they use narrower-than-standard reedplates, so sourcing adequate A/D Liliput reedblocks may prove more challenging than standard Erica or Pokerwork blocks, which are readily available in various tunings.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Lilliput question
« Reply #4 on: November 26, 2024, 07:33:11 AM »

Tirpous is right. You can't just 'buy' Liliput blocks…these instruments were last manufactured about 80 years ago. And the reeds are not a standard size (not sure about this…but possibly the Hohner Mignon single voice piano accordion has similar sized reeds). On a side note, if the blocks keep jumping out the little brass fixings need adjusting.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal