Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Replacing Felt on foot of Hohner Reed Block  (Read 2280 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Replacing Felt on foot of Hohner Reed Block
« on: November 24, 2024, 10:00:29 PM »

Sometime back I "borrowed" an Eb treble block from a Bb/Eb instrument to try it as a D# row in my D/G pokerwork

To fit it in to a modern Pokerwork, with the gasket glued into the treble casing, I removed the original felt gasket from the block.
The time has nowc ome to put the Eb block back where it came from....

The problem now is how to mark out and cut suitable (ideally 10mm diameter) holes in the new felt.

Has anyone done this and how? 

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #1 on: November 24, 2024, 10:13:56 PM »

I use olovisc gasket. Glue it onto the reedblock and then cut out the holes with a scalpel. Use a brand new blade and mind your fingers!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #2 on: November 24, 2024, 10:16:06 PM »

Spot on advice from Rees.  I do the same. Make sure the glue is thoroughly cured before cutting, or the gasket will move as you attempt to cut.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #3 on: November 25, 2024, 10:58:42 PM »

10A scalpel blade is best for this job.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #4 on: November 25, 2024, 11:37:01 PM »

Or... carefully mark out the hole pattern on the olivisc (or felt if keeping things original,) then punch the holes out. You'll need to find or make a suitable hole punch.
For me and my poor scalpel work, this gives a neater finish. I remember seeing Rob Beecroft of Birmingham Accordions doing this once and have done it myself several times having bought modern reedblocks for older Hohners.
Logged

Frankal

  • Good talker
  • **
  • Offline Offline
  • Posts: 78
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #5 on: November 26, 2024, 06:40:04 AM »

Any recommendations on sourcing olovisc?
I previously purchased from Charlie Marshall
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #6 on: November 26, 2024, 08:57:26 AM »

10A scalpel blade is best for this job.
Use these a lot, their main benefit is that, because they are si sharp, you can cut yourself and not even notice until there is blood everywhere  (:)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #7 on: November 26, 2024, 01:02:20 PM »

It's been a while since I've done this…but I'm of the gettabettabox camp. I make a paper template first by pressing the paper on the reed block foot and drawing the holes with a pencil, until it's all ok, then make the gasket using the paper template.

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #8 on: November 26, 2024, 01:11:49 PM »

One suggestion that I've seen on here was to photocopy the base of the reed block if you have a combo printer.
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #9 on: November 26, 2024, 06:55:21 PM »

10A scalpel blade is best for this job.
Use these a lot, their main benefit is that, because they are si sharp, you can cut yourself and not even notice until there is blood everywhere  (:)

I have many fierce machines in my workshop. Bandsaw, chop saw, three table saws, some routers and a giant sanding belt but none are as evil and sneaky as the 10A scalpel blade. Apparently they're purpose made for cutting human flesh - who knew?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #10 on: November 30, 2024, 11:49:51 PM »

Now l am understanding why the old hohner felt was red....and  living in fear of my fingers.
Logged

David Colpitts

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #11 on: December 01, 2024, 12:33:01 AM »

I use olovisc gasket. Glue it onto the reedblock and then cut out the holes with a scalpel. Use a brand new blade and mind your fingers!


Don't know what olovisc is, or what something similar might be in US.  Any help?  Thanks!
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #12 on: December 01, 2024, 08:41:26 AM »

Car wash chamois. Genuine one - not the synthetic stuff. Ideally, sold as a hide, no in pre-cut squares.
Cut along the spine to get the thickest chammy (0.7-0.8mm typically). Check against a source of light to make sure you avoid any scars - you want uniform thickness.

Cut 5-6mm lines. Glue them onto the fondo with contact cement of your choice. I use professional shoe glue that looks, smells and glues exactly like Hohner valve glue.
No need to cut holes. No need to glue more gasket than 6mm - your bellows frames are running on the same stuff.
Some of the world's finest bayans are made with such gaskets, and I'll choose a hand-made pro-grade bayan over any of them Castagnari or Bafetti factory jobs any time.


Enjoy squeezin'.


« Last Edit: December 01, 2024, 08:44:21 AM by mChavez »
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #13 on: December 01, 2024, 10:19:31 AM »

I use olovisc gasket. Glue it onto the reedblock and then cut out the holes with a scalpel. Use a brand new blade and mind your fingers!


Don't know what olovisc is, or what something similar might be in US.  Any help?  Thanks!

Olovisc is a synthetic cork gasket, often adhesive backed. In the UK we usually buy this from Carini in Italy. I'm not sure what is available in the US.
Some Googling may be required.
Here's a link to Carini.
https://carinidena.it/MS5ECOMMERCE60/jsp/eco_cc_home_bs_portlet.jsp?lang=en&langswitched=1&p=searcharti&w_ricgruppo=%2705FISA%27&w_ricsgruppo=%2758TE%27&w_riccateg=%275808TE%27
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #14 on: December 01, 2024, 10:33:28 AM »

You could also use a cork gasket material.  This sort of thing is often available is small quantities from businesses that supply parts for classic vehicles.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Replacing Felt on foot of Hohner Reed Block
« Reply #15 on: December 01, 2024, 01:13:12 PM »

I actually find cutting the holes with a scalpel, after fixing to the block, quite therapeutic. But just as I'm getting the hang of how best to do it again, it's finished!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal