Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass Buttons for One-Row  (Read 1255 times)

0 Members and 1 Guest are viewing this topic.

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Bass Buttons for One-Row
« on: December 11, 2024, 11:57:50 PM »

Hello all,
A couple of weeks ago I bought a very pretty little early-1900s one-row box from eBay. I usually steer clear of the old German one-rows as I am aware that a lot of them are atrocious, and the good ones generally need an atrocious amount of time and money put into them to get them playing again. Anyway, this thing is a "Patent BOS Melodeon" in the key of somewhere-between-G-and-Ab-ish, and I thought that for £10 including postage it might be a bit of fun. It's very solidly built - the bellows are nothing special (no metal corners (beautiful paper though)) and the reeds are predictably mediocre (brass on long zinc plates), but the rest of the frame appears to be oak, and it's varnished rather than having the standard black finish. It has 6 stops - three on each end - and while two of the bass ones are dummies, the middle one brings in a bank of low reeds, which is a nice touch.The treble side is LMM (Or maybe MHH, as it plays an octave above most G boxes I've seen), with a stop for each voice, as expected. he "patent" part of its name refers I believe to the bellows locking mechanism, which is operated by the air button, and isn't as inconvenient as you might think

Anyway , back to the point.
The sparse description on the listing said that it was an abandoned project, and when I received it I was pleased to find that the thumb loop and bass strap had already been replaced (pleather, but better than nothing), and displeased to find that every single joint - all the reedplates, all the wood joints, the inside of the growlbox, even where the bellows attach to the frames - had been given the glue gun special. However, after gently extracting all the glue (significantly lightening the instrument in the process), replacing the old leather gasket under the reedplates, taping off three broken reeds and doing some general hide-glueing, I've found that it's actually really quite a fun instrument to play. It's a work in progress, but it has a brilliant strong sound and it's pretty compact, and I like it a lot.

Anyway anyway,
The main problem I have is that the original bass buttons have disappeared. They're the long mushroom plunger-y type rather than the spoon type, and they've been replaced with short wooden dowels by the previous 'repairer'. The dowels work, but their problem is that they're too short; they sit level with the growlbox, and so they're pretty uncomfortable and hard to use. Does anyone know if modern replacements are available for that type of button, and if so, where I can lay my hands on three?

Thanks!
Oskar
Logged
Oops! All Hohners

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Bass Buttons for One-Row
« Reply #1 on: December 12, 2024, 08:31:07 AM »

For my one-row melodeons, I make my own bass buttons.
As far as I know they are not commercially available.
I was in Carini's old shop in Castelfidardo and asked about these. Old man Carini showed me how to make them. Here's how:
Cut the head off a suitably sized wood screw and Araldite it into the head of a press stud fastener.
Then glue a short piece of brass or aluminium tubing over half the thread and the press stud tube. That's it.
I'll post a pic later when I'm in the workshop.
Emmanuel Pariselle also makes his own with a bigger button head using steel cups designed for furniture feet.
He sets the screw head into the cup using chemical metal.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Bass Buttons for One-Row
« Reply #2 on: December 12, 2024, 11:18:39 AM »

There are also mirror screws that have a thread tapped into the head to accept a chromed dome.
These look ideal for adapting.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Bass Buttons for One-Row
« Reply #3 on: December 12, 2024, 11:59:22 AM »

For my one-row melodeons, I make my own bass buttons.
As far as I know they are not commercially available.
I was in Carini's old shop in Castelfidardo and asked about these. Old man Carini showed me how to make them. Here's how:
Cut the head off a suitably sized wood screw and Araldite it into the head of a press stud fastener.
Then glue a short piece of brass or aluminium tubing over half the thread and the press stud tube. That's it.
I'll post a pic later when I'm in the workshop.
Emmanuel Pariselle also makes his own with a bigger button head using steel cups designed for furniture feet.
He sets the screw head into the cup using chemical metal.

John Doucet ( a Cajun builder as you would know Rees, said for those that don’t) makes his own using the furniture feet cups also , I thought he somehow soldered it in but maybe he uses the chemical metal? What is it anyway? I’ll have to look it up. John then wraps the upper portion of the screw with a (cloth?) tape and adds a felt ring to the underside of the button. When I built my one row I bought some one piece buttons from mouton accordions for the bass but they were much taller and the screw was wider so I didn’t use them, they did look nicer overall and were chrome.
I would like to see your picture as well.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Bass Buttons for One-Row
« Reply #4 on: December 12, 2024, 03:17:44 PM »

Since Rees showed me his method ive made and fitted loads and they work great and look smart. Ive found prym sport and camping 15mm chrome to be the nicest. they also fit nicely into the chair domed feet if you then want to go a step larger. I just use rubber tube over the screw thread. if its going into a pre exisiting hole you might have to try different screw thread sizes or fill the hole and redrill. be careful . the pallet can split if you overtighten or use too big a screw thread and then its chop out the old one and make a new one. (wood/webbing/felt/leather/chisel/glue/clamps/spring/)
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Bass Buttons for One-Row
« Reply #5 on: December 12, 2024, 04:21:59 PM »

The attached picture shows original old German buttons on the left.

Next are 5/8'' hole plugs. They have fingers that can be crimped around the head of a suitable screw or bolt (a washer, glue and/or solder may help).

Then the screw caps, which have a threaded stud, I think this is the 'chromed dome' Squeaky Pete mentioned (also available flat and in other finishes/sizes). Can be used with the special tapped screws, or one thing I've done is epoxy them into a Chicago bolt extender for a nice metal post. It's a regular Chicago bolt on the right, the extender has threads at one end and a threaded hole at the other.

Trial and error is your friend, good luck finding something that works for you !



 
Logged

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Re: Bass Buttons for One-Row
« Reply #6 on: December 13, 2024, 02:26:42 PM »

Thank you for all the suggestions! I think I'll probably have a go at making my own. I was expecting complicated machining and expensive equipment, but it seems quite the opposite! I'll post an update when I finish it :)
Logged
Oops! All Hohners

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Bass Buttons for One-Row
« Reply #7 on: December 14, 2024, 12:36:48 PM »

Buy some black ABS rod in the correct diameter. Cost Peanuts.
Cut to size, square both ends.
Drill the bottom just underthe diameter of bass push rod.
Gorilla-glue some MoP Cabochons on top.
Heat up the rod and melt the button onto it.


Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Bass Buttons for One-Row
« Reply #8 on: December 14, 2024, 05:06:35 PM »

Buy some black ABS rod in the correct diameter. Cost Peanuts.
Cut to size, square both ends.
Drill the bottom just underthe diameter of bass push rod.
Gorilla-glue some MoP Cabochons on top.
Heat up the rod and melt the button onto it.

That's a great idea but not suitable for one-row growl boxes as there are no push-rods.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal