Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Problem seperating bellows from casing  (Read 1678 times)

0 Members and 1 Guest are viewing this topic.

Al Cramer

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
Problem seperating bellows from casing
« on: December 20, 2024, 10:26:56 PM »

Hi --
I have a B.Loffet G/C and want to tape off the 3rds. I removed the 6 bellow screws, but couldn't pull the casing away from the bellows. I played it for a bit, to see if they would separate, but that didn't work.  The box is one of his entry-level instruments & I don't think it has ever been played (I bought it from a dealer who said it was from the estate of a guy in St. Louis that liked to buy accordions, but didn't like to play them.)

Any advice will be appreciated!


 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Problem seperating bellows from casing
« Reply #1 on: December 21, 2024, 07:28:29 AM »

Just pull harder!   The gasket material tends to stick to the surface that it is not glued to, especially after it’s been undisturded for a long time.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Problem seperating bellows from casing
« Reply #2 on: December 21, 2024, 01:30:17 PM »

Butter knife?
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Brian Wyneken

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: Problem seperating bellows from casing
« Reply #3 on: December 21, 2024, 02:24:45 PM »

I've use a "glue spreader" (flexible plastic blade on a handle) - can usually be found in hobby stores. [I've also used weather stripping to replace the bellows gasket, but that was for a cheaper box]
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Problem seperating bellows from casing
« Reply #4 on: December 21, 2024, 04:11:41 PM »

For me the tool of choice is an old putty knife with thin blade and rounded corners. Gently insert the blade between gasket and casing (bass-side I assume) and work your way around the seam, at some point it will release. Unless... could there be some other fastener(s) inadvertently keeping the 2 parts attached (an improperly located or too-long strap bracket screw, for example) ?

Out of curiosity: You mention bellows 'screws', are they really screws? Usually it's pins, more like a nail.



Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Problem seperating bellows from casing
« Reply #5 on: December 21, 2024, 04:14:57 PM »

Out of curiosity: You mention bellows 'screws', are they really screws? Usually it's pins, more like a nail.
Loffet appears to use screws, thought it was odd first time I met one but all the ones I have fettled have had screws

Al Cramer

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
Re: Problem seperating bellows from casing
« Reply #6 on: December 21, 2024, 08:41:05 PM »

Thanks all, it's done. I used a "knife" that looks like something you'd use in plastering -- 1 inch wide blade, very thin springy steel -- that I use to take fingerboards off violins. I inserted it, gave a little twist, and the box immediately opened. Didn't even have to run the knife around the case & the gasket wasn't damaged at all. I can now play "Drowsy Maggie" and "Jenny Nettles" on a G/C box!

Re the screws: they're flat-heads. The countersinking is very precise, tres elegante.

Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Problem seperating bellows from casing
« Reply #7 on: December 21, 2024, 09:17:56 PM »

Congrats!
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Problem seperating bellows from casing
« Reply #8 on: December 22, 2024, 07:03:03 PM »

Well done Al ! Your tool sounds exactly like my putty knife, purchased and modified long ago to... remove guitar fingerboards. It proved very useful over the years, not only for that but also all kind of odd jobs around the house. I didn't know at the time, but it was money well spent !

Interesting info about the screws, I learned something there. Thanks to you and Lester for the replies.
Logged

Al Cramer

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
Re: Problem seperating bellows from casing
« Reply #9 on: December 22, 2024, 10:46:02 PM »

Remove guitar fretboard -- that would terrify me, I've heard guitar people use aliphatic resin glues?

Real reason for posting is to thank everybody for their advice. This site is invaluable to people like me.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Problem seperating bellows from casing
« Reply #10 on: December 23, 2024, 07:43:54 AM »

... I've heard guitar people use aliphatic resin glues? ...

Probably because they have a lingering fear of it popping off as the truss rod is tightened.  Possibly the same builders who are masters at concealing the nail(s) they use to eliminate any risk of the heel of the neck parting from the body as the strings are tightened ...
Logged
We're all doomed ...

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Problem seperating bellows from casing
« Reply #11 on: December 23, 2024, 02:00:09 PM »

I use an old bone handled dinner knife for such tasks. Fyi I've encountered screws on some PAs..as well as Loffet. I"m slightly baffled by the use of screws. They are a nuisance. The only practical reason is on the back of Pigini PAs, under the back pad. The screw heads lay flatter than pins. But otherwise they are a PITA.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Problem seperating bellows from casing
« Reply #12 on: December 23, 2024, 03:16:12 PM »

Quote
Remove guitar fretboard -- that would terrify me, I've heard guitar people use aliphatic resin glues?

Yes, aliphatic resin glue is used quite a bit for guitar work. It releases with heat and/or humidity. To remove an acoustic guitar fretboard, heat the tongue (part extending over the body) and insert the knife at the soundhole end (the tricky part). Once the seam is open its just a mattter of repeating the heat/release process along the neck, slow zipper. Silicon heat blankets and other fancy items are available, but a clothes iron works fine.   
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal