Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Mixing Hohner Reeds (entire row)  (Read 475 times)

0 Members and 1 Guest are viewing this topic.

SqueEzold

  • Member
  • *
  • Offline Offline
  • Posts: 15
Mixing Hohner Reeds (entire row)
« on: January 06, 2025, 01:50:32 PM »

Has anyone tried building up a hohner with one entire reed block made up of H zinc plate reeds and the other block entirely T stamped Aluminum reeds? I’m wondering if the difference in tone is noticeable or if it is negligible. I have multiple sets of each, but would need to mix them on a few projects. This would likely be a semitone box for whatever that is worth.
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Mixing Hohner Reeds (entire row)
« Reply #1 on: January 06, 2025, 07:43:00 PM »

I have a C#D built up like that and for me anyways, it seems negligible. Especially since you are only playing primarily on the one row and just dipping into the C# row for reversals and lesser used notes. Others may disagree. They usually do. >:E 
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Mixing Hohner Reeds (entire row)
« Reply #2 on: January 06, 2025, 08:18:17 PM »

In a lot of older Hohners you’ll actually see a mix of H and T-stamped reeds, as well as a mix of zinc and aluminum plates, all in the same instrument, straight from factory.  In each case, I’ve been unable to determine any difference in tone. I’d say you’d be fine to mix and match as needed.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Mixing Hohner Reeds (entire row)
« Reply #3 on: January 06, 2025, 08:21:30 PM »

Most two row boxes with all matching reeds have tonal differences between the rows so the slight difference between Hohner reeds  on zinc or aluminium plates will not be a problem
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

SqueEzold

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Mixing Hohner Reeds (entire row)
« Reply #4 on: January 06, 2025, 11:23:08 PM »

Great, thanks for the responses! I’ll try and post the results here if I remember.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal