Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Mic stand positioning  (Read 2187 times)

0 Members and 1 Guest are viewing this topic.

JimCh

  • Member
  • *
  • Offline Offline
  • Posts: 5
Mic stand positioning
« on: January 31, 2025, 08:48:46 PM »

One of the melodeon players in my dance band has thrown me a bit of a surprise by telling me he no longer wishes to use his contact mics because of excess handling noise, so wants to go to using mics on stands. Which is fair enough. However I need to work out how to set things up for our circumstances. The band is moving to using IEM, so monitor feedback ought not to be too much of an issue. The obvious positioning, of course, is two widely spaced stands pointing at the box ends, but its a lot of stage clutter, and as you all know there are issues with distance to the bass end . So I was wondering if it were worth trying a pair of mics on a mic bar, as used for stereo recording, pointing outwards. Lots of potential issues of course, not least background noise from the other instruments, but I wondered if anyone has tried this sort of setup, whether for recording or live? And if so what was the experience like? Running gooseneck mics isn't an option, at least for the next dance. Or are there any other thoughts on positioning two mics?
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Mic stand positioning
« Reply #1 on: February 01, 2025, 08:20:17 AM »

So here's my experience. I struggled with stand mics because the melodeon has to be held in the right position, so I would be sitting down, and as you say, it's annoying stage clutter. I think they were a matched pair of stereo mics, plus you need foldback of some sort otherwise you can't tell if you've moved out of alignment.
Then i got a couple of gooseneck mics (Thomman cheapos…but perfectly adequate), which i velcroed on left/right. Mostly ok and still used as backup or spares. But with two leads a bit of a nuisance to set up, but a workable solution.
Finally i fitted some internal mics, which for me was the way to go. One lead, plug it on, great sound etc.
I've noticed though that the choice is 'horses for courses'. You'll get different answers and preferences depending on the individual, though the choice and set up in my case is very much down to me to resolve, rather than me throwing the problem at someone else.

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Mic stand positioning
« Reply #2 on: February 01, 2025, 11:21:40 AM »

To answer the question, I'd stick one mic on the right facing into the grille of the right end, possibly a couple of feet away. I'd point the other in front of (i.e. between the audience and the bass end of the box) facing the front of the bass end (not the grill)

Code: [Select]
  ||
  \/

  []<><><>[]   <=
 

If that survives the formatting. But that's not exactly great, and lots of stage clutter like you say. So I'd stick with either built-in or swan neck mic's. I have an aging AKG swan neck on the front, and a clip on drum mic on the bass strap. Works great, but one day it won't. On a pokerwork I have a 30+year old Microvox 310. Again, works great. One day it won't.

If your player is complaining about contact noise though, are they only bothered about noise when they pick it up/put it down? If so, get them a foot switch mute or volume pedal so they can turn the thing on and off when they want to.

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: Mic stand positioning
« Reply #3 on: February 01, 2025, 12:31:51 PM »

Mic stands are fine when you have enough space.  However in my long experience of playing in dance bands they often find themselves playing in fairly confined spaces where clutter is a problem. Handling noise from contact mics is nothing compared with what you get from clouting a live mic with a melodeon.

My preference is gooseneck mics (a pair of AKG C516 in my case). The wires can be a nuisance but I have the treble lead gaffer-taped to a spare shouldr strap and clip the battery pack to the strap so it's not really a problem. Internal mics are probably better but I like to have the option to put them on a different instrument sometimes.

A halfway house which I used for many years was a clip-on mic on the left hand with a stand on the right.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Mic stand positioning
« Reply #4 on: February 01, 2025, 01:14:18 PM »

Mic stands are fine when you have enough space.  However in my long experience of playing in dance bands they often find themselves playing in fairly confined spaces where clutter is a problem. Handling noise from contact mics is nothing compared with what you get from clouting a live mic with a melodeon.

And mic on a stand can also pick up a lot of noise from the floor especially on hollow floors, and wort of all on temporary stages.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Mic stand positioning
« Reply #5 on: February 01, 2025, 02:05:02 PM »

Mic stands are fine when you have enough space.  However in my long experience of playing in dance bands they often find themselves playing in fairly confined spaces where clutter is a problem. Handling noise from contact mics is nothing compared with what you get from clouting a live mic with a melodeon.

My preference is gooseneck mics (a pair of AKG C516 in my case). The wires can be a nuisance but I have the treble lead gaffer-taped to a spare shouldr strap and clip the battery pack to the strap so it's not really a problem. Internal mics are probably better but I like to have the option to put them on a different instrument sometimes.

A halfway house which I used for many years was a clip-on mic on the left hand with a stand on the right.

Which is exactly what I've used successfully for many years -- a bass end clip-on avoids the problem of the bass end moving around and getting louder and quieter.

You can get a goose-neck one, but I just clip one onto the bottom end of the strap -- inside the strap picks up less external noise/feedback, at the bottom keeps it away from the air button. Other people clip one onto a wrist-band, makes it easier to swap boxes but needs more gain so is more prone to feedback.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

JimCh

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Mic stand positioning
« Reply #6 on: February 01, 2025, 06:38:00 PM »

Thanks folks. No-one here has tried an ORTF configuration then?

Clive, that's a very good thought about the asymmettric mic positioning, that hadn't occurred to me, but now you've pointed it out that sounds like a good and rational starting point.

I don't disagree with any of you about gooseneck mics and there being preferable solutions to mics on stands, but of course its not my choice to make!
Logged

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Mic stand positioning
« Reply #7 on: February 01, 2025, 07:06:30 PM »

I don't disagree with any of you about gooseneck mics and there being preferable solutions to mics on stands, but of course its not my choice to make!

Jolly lucky then that the band member in question only plays box on two tune sets and that the other box player, the one who plays squeezebox on pretty much all the band's sets, will dutifully turn up with a Microvox set for the melodeon and a pair of goosenecks for the anglo, plus IEMs and all necessary cables.  ;)
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Mic stand positioning
« Reply #8 on: February 01, 2025, 09:26:08 PM »

Thanks folks. No-one here has tried an ORTF configuration then?

Clive, that's a very good thought about the asymmettric mic positioning, that hadn't occurred to me, but now you've pointed it out that sounds like a good and rational starting point.

I don't disagree with any of you about gooseneck mics and there being preferable solutions to mics on stands, but of course its not my choice to make!

ORTF works well for recording and broadcast, but in this situation (especially the minimal number of #'s) I wouldn't bother.  The main drawback is that you'll get a very high percentage of ambient and teflected sound and a much less usable level of the intended pickup.

Contact mics are cheap and noisy, interior mics can sound "boxy".  Best bet is close external miking.
In this instance as both player and sound tech I agree with a mic on a stand for the RH and a clip-on mic for the LH...but if it's just a couple of numbers and two box players I'd only want to deal with one LH box mic at the sound board.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Mic stand positioning
« Reply #9 on: February 01, 2025, 11:06:06 PM »

When you say contact microphone, do you mean that on the left-hand side the mic is fixed on the bass side? Or is it a convenient way of speaking of a clip-on mic? With a low-cut properly set-up and a clip-on mic, there's virtually no handling noise.
While the stand for the right-hand side should not be an issue, for the left-hand side I fear it may bring more problems than it solved (even with IEM). If you're a dance band it means a noisy environment (static mikes for a sitted concert is great), and with the left-hand side moving and all, it calls for either a pricy mic (and a tricky set-up for the sound technician), or an average mic that will probably pick up many undesired sound, as well as not reproducing the timbre adequately (tricky set-up for the technician as well, athough a different one).

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Mic stand positioning
« Reply #10 on: February 01, 2025, 11:16:25 PM »

PS

Use a short mic stand with a short 2-section telescoping boom to save space.  Regular "vocal mic" stands are really ugly when used for waist height or seated instruments and a shorter stand (think kick mic) with the boom angled up is much less prone for the un-used end of the boom to become an obstruction and get bumped out of line.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

JimCh

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Mic stand positioning
« Reply #11 on: February 02, 2025, 12:12:43 AM »

Thanks Dick, Y, all noted. Yes, they are genuine contact pickups with double side tape or whatever, presumably piezo pickups, and do grab a certain amount of button and finger clattering. Whilst I doubt it's a distraction to our public, I don't know about you, but if I'm unhappy with my tone/sound my playing suffers, so I try to do what I can to make folk happy.
Mic wise I only have a limited selection, but will start with my new pair of Rode condensers and cross fingers. Can't really use hypercardiod in this application.

It's a very good point about stands too, but I spent more than I wanted on a digital mixer so the budget is a bit strained! You've got me wondering if I should cut down some arms. It wouldn't be hard to reduce a couple of my stands, and as they are mostly what was cheapest secondhand locally it's not as if it would be a big sacrifice.

And yes, HH, it is noted and appreciated.
« Last Edit: February 02, 2025, 12:30:27 AM by Jim Champ »
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Mic stand positioning
« Reply #12 on: February 02, 2025, 03:01:45 AM »

Thanks Dick, Y, all noted. Yes, they are genuine contact pickups with double side tape or whatever, presumably piezo pickups, and do grab a certain amount of button and finger clattering. Whilst I doubt it's a distraction to our public, I don't know about you, but if I'm unhappy with my tone/sound my playing suffers, so I try to do what I can to make folk happy.
Mic wise I only have a limited selection, but will start with my new pair of Rode condensers and cross fingers. Can't really use hypercardiod in this application.

It's a very good point about stands too, but I spent more than I wanted on a digital mixer so the budget is a bit strained! You've got me wondering if I should cut down some arms. It wouldn't be hard to reduce a couple of my stands, and as they are mostly what was cheapest secondhand locally it's not as if it would be a big sacrifice.

And yes, HH, it is noted and appreciated.

Forget the fancy condensers.  Best mics for such applications are SM58's or the like.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Mic stand positioning
« Reply #13 on: February 02, 2025, 09:05:13 AM »

SM57 for instruments, SM58 for vocals.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Mic stand positioning
« Reply #14 on: February 02, 2025, 10:15:11 AM »

I agree, SM57 or SM58 will do the trick for the right-hand side (although they need a bit of work on the EQ), but for the left-hand side, IMO it's a waste: they're meant to be in relative close proximity of the source, which is not really doable properly for the left-hand side. Either you are close and it's a pain for the player that has to keep a permanent attention not to go too far or not to knock the mic, or it's a bit further and the frequency response of those mics becomes really poor, picks up all the noise ok the stage, and perhaps calls for compression (which isn't really good for dynamics) in order to have a steady sound.

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Mic stand positioning
« Reply #15 on: February 02, 2025, 10:30:10 AM »

Quote from: Dick Rees link=topic=31150.msg361920#msg361920 date=

Forget the fancy condensers.  Best mics for such applications are SM58's or the like.
I agree, but not because they are fancy, more that they are designed to pick everything. The only time I ever used small condensers on a noisy stage was a nightmare. I was short of mics and thought they might sound nice on the ladies’ voices, but it was terrible it captured a lot of noise, movement,  the stage etc. I’ve used them as overheads, way above the stage, and they worked well for that.
Gren
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

JimCh

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Mic stand positioning
« Reply #16 on: February 02, 2025, 10:47:48 AM »

Thanks again people. All noted. My cheapest secondhand boom stand is now my cheap secondhand *short* boom stand, which hopefully will do something to make stage centre less like a scaffolding yard. I imagine we could debate mic choice almost endlessly, every other branch of music can [grin] but I shall just have to see what seems most effective from my small collection.
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Mic stand positioning
« Reply #17 on: February 02, 2025, 11:04:19 AM »

Yes, they are genuine contact pickups with double side tape or whatever, presumably piezo pickups, and do grab a certain amount of button and finger clattering. Whilst I doubt it's a distraction to our public, I don't know about you, but if I'm unhappy with my tone/sound my playing suffers, so I try to do what I can to make folk happy.
In that case a proper (even cheap) clip-on mic, clipped on the left-hand strap, has next to no handling noise (and does not pick the foot stomping  (:) ), doesn't inconvenicence the player, and provide a steady sound.

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Mic stand positioning
« Reply #18 on: February 02, 2025, 01:13:09 PM »

I agree, SM57 or SM58 will do the trick for the right-hand side (although they need a bit of work on the EQ), but for the left-hand side, IMO it's a waste: they're meant to be in relative close proximity of the source, which is not really doable properly for the left-hand side. Either you are close and it's a pain for the player that has to keep a permanent attention not to go too far or not to knock the mic, or it's a bit further and the frequency response of those mics becomes really poor, picks up all the noise ok the stage, and perhaps calls for compression (which isn't really good for dynamics) in order to have a steady sound.

The problem with the 57 is the loose "basket" over the element which, when contacted, gives a loud pop.  Thus my choice of the 58 which has very low handling noise.

And never try to secure the basket on the 57.  It's ported loose for a reason. Closing off the ports to stabilize the rong changes the polar pattern to omni and you end up picking up the whole stage.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Mic stand positioning
« Reply #19 on: February 02, 2025, 04:23:12 PM »

Quote
Yes, they are genuine contact pickups with double side tape or whatever, presumably piezo pickups, and do grab a certain amount of button and finger clattering.

It's what they're designed to do, pick up a mechanical vibration and amplify it. This works reasonably well for string instruments, where the sound produced originates from the vibration of the soundboard, back, etc... In a melodeon, the sound is made by the reeds chopping the air flowing through them, so to pick up the mechanical vibration of the box (a by-product) would not be the best approach, IMO.

ORTF or 2 mics on a single stand would be suitable for recording a whole band or ensemble, maybe border-line feasible for sound-reinforcement in a reasonably quiet acoustic band setting. But if you want melodeon sound and as-little-else as possible on the melodeon channel, it's best to go with close-miking.

Shure SM57 and SM58 are well-known general purpose workhorses, simple, versatile, rugged and proven. These or similar dynamic mics may be the best choice overall, from a practical point of view, but there are much better sounding microphones around. If you already own 2 Rode condenser microphones, by all means give them a try before running out to buy something else.

I've had good luck with Audio Technica clip-on microphones, similar to the already-mentioned AKG C516 (by the way, these clip-ons are condenser microphones). Things get more complicated if the player uses multiple boxes.

Here is a link to a guide to live sound miking by Shure (I'm shure there are many more available online  (:)). The section on stereo microphone techniques could be of interest. And fwiw they recommend miniature internal mics for accordion...

chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.shure.com/damfiles/default/global/documents/publications/en/performance-production/microphone_techniques_for_live_sound_reinforcement_english.pdf-3df433145fca686a736beeb5da588efa.pdf
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal