Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dix reeds?  (Read 1124 times)

0 Members and 1 Guest are viewing this topic.

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Dix reeds?
« on: February 03, 2025, 07:54:58 PM »

I'm helping someone to sell a couple of piano accordions that they found in the music cupboard in the school they work at. One is a Midella De Luxe IV - a pretty run-of-the-mill Saxony box, a bit nicer than most of the Klingenthal exports but nothing super duper special. It looks rather lovely with deep red celluloid, gold trim and pearloid-capped bass buttons but it's not really worth repairing (I don't think), with significant leaks, missing and warped keys, deteriorated valves and wax etc.. However, the reeds are steel on circle-stamped zinc plates. They look like they could quite possibly be length-ground as well. Now, I'm not a reed expert, but from what I've heard in the past this denotes them as being made by Dix, and potentially being quite good reeds. Does this sound likely? And if so, would it be worth selling this box for the reeds rather than just sticking it on facebook marketplace for cheap? It's a full size, four voice treble, five voice bass piano accordion, so there are an awful lot of reeds in it.
Thanks!
Logged
Oops! All Hohners

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Dix reeds?
« Reply #1 on: February 03, 2025, 08:11:52 PM »

I've scrapped a number of PA's just to get the reeds. The problem, if it is a problem, is that the plates tend to be quite a bit longer than those usually found in our little diatonics. In saying that, I'd be interested in making an offer for the blocks with the reeds on them.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Dix reeds?
« Reply #2 on: February 03, 2025, 09:48:38 PM »

Are you in the UK?
I'd like to see some photos. as PA reeds can be used in a hromka melodeon.

Dix made a whole range of reeds through the years, from utter garbage to some of the best pre-war hand made reeds.

Logged

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Re: Dix reeds?
« Reply #3 on: February 03, 2025, 10:34:11 PM »

Are you in the UK?
I'd like to see some photos. as PA reeds can be used in a hromka melodeon.
I'm in the UK, yes. Specifically at the Orchard Special Needs School in Newark, or at least that's where the accordion is. The reeds are pretty grubby, but here are a couple of pictures
Logged
Oops! All Hohners

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Dix reeds?
« Reply #4 on: February 04, 2025, 08:40:24 AM »

Thank you.

I'm no Dix expert, but my gut reaction, to put it mildly, is that these are quite far from the "best handmade reeds" range to be honest.
I've had a clapped-out Czech box that had even worse Dix reeds in it, but these don't seem to be very far off: going by the photos there are some in-your-face fitting gaps.
Serious amount of rust and pitting doesn't help.

I suspect that the timbre might actually be quite good if these were overhauled, but I don't think they are anything to write home about.

I'd say, stick them on ebay and see if the little stamped circles raise any funds for the school. Alternatively, given you're in Newark and there's a lutherie school there, you might get a couple quid for the whole box to some keen student to learn repair on.
Logged

Squeezebox Of Delights

  • Good talker
  • **
  • Offline Offline
  • Posts: 81
Re: Dix reeds?
« Reply #5 on: February 05, 2025, 09:06:54 PM »

Thank you.

I'm no Dix expert, but my gut reaction, to put it mildly, is that these are quite far from the "best handmade reeds" range to be honest.
I've had a clapped-out Czech box that had even worse Dix reeds in it, but these don't seem to be very far off: going by the photos there are some in-your-face fitting gaps.
Serious amount of rust and pitting doesn't help.

I suspect that the timbre might actually be quite good if these were overhauled, but I don't think they are anything to write home about.

I'd say, stick them on ebay and see if the little stamped circles raise any funds for the school. Alternatively, given you're in Newark and there's a lutherie school there, you might get a couple quid for the whole box to some keen student to learn repair on.

Yes, they definitely don't look like brilliant reeds. I reckon they'd clean up decently though - the rust isn't too bad actually, as far as I could tell it's just light surface rusting. And as for the lutherie school, I think I'm the only student who might be interested in a knackered old accordion! Thanks for the suggestion though :)
Logged
Oops! All Hohners

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Dix reeds?
« Reply #6 on: February 06, 2025, 09:03:34 AM »

They might.

Is the steel quite stiff when you bend a reed back or is it quite loose?
Also, do all reeds have parallel sides?

Never worked with zinc - is it easy to deform? If steel is reasonably stiff and sides are parallel, you should get a very sweet LM dry sound on them, and if you can roll & chisel them, you can get TAM levels of performance, as long as you have some time to spare.

I've got way more loose reeds than I need, but if the choice is to bin them or stick them in the post, I might add them to my ever growing collection for a small donation :-[
« Last Edit: February 06, 2025, 09:05:17 AM by mChavez »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal