Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: LMM with one register  (Read 1067 times)

0 Members and 1 Guest are viewing this topic.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
LMM with one register
« on: February 08, 2025, 08:28:57 AM »

Hi Folks,

A few weeks ago I've tuned my "new" LMM+16 3-voice box with no registers, and although I was unsure about the absence of registers in a 3-voice box, I've been playing it for 2 weeks now and I can't put it down, so I haven't got tired of the sound yet and it doesn't look like I will get bored any time soon.

I'm slowly drafting designs for a scratch 3-voice build, and I'm facing the dilemma of adding a register stop for one bank of reeds.

If you were making or ordering a custom 3-voice box (very low pitched, essentially an equivalent of F-Bb in quint world), what would you do? Your thoughts are welcome.
- Perma LMM+12? Keep it simple stupid.
- Register on the L? Essentially, this becomes an octave switch.
- Register on the de-tuned M+? Wet & dry options.

I'm thinking of putting a stop on the M+ bank, but there's a few pros and cons. In any case I intend to keep at least one other dry and musette box (in different keys) alongside the new one.

Pros: I get dry and musette sound in the same box; It's easier to tune & keep in tune as long as register slider works 100 accurate.
Cons: More complex design takes more time & effort; If slider does not work 100% accurate, M+ tuning can go all over the place; extra air leakage (?) which might be noticeable on a small cross section box; dimensional changes in wood can get the slider to jam; I've never made a register switch/stop to date, so risk of making a pig's ear out of it.

And technical part: I've got a few spare aluminium sliders, so the idea is to rout a groove in the base of the reedblock, leaving just enough space for the slider to go in, then glue a 2-mm sole over it. How can I glue the sole without getting the glue to bead inside the slider slot and prevent the slider from moving in & out freely?

How reliable are top-mounted stop switches in terms of tuning accuracy? My experience with grille-mounted accordion machines is that they very often don't switch 100% when you press a button in the heat of the moment, and tuning can go off quite easily. Even on very high end accordions.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LMM with one register
« Reply #1 on: February 08, 2025, 08:42:03 AM »

I’ve made register slides from thin aircraft ply which was about 1mm or 1.5mm.  Glue a: strip on either side to form the channel.  I didn’t use a cover,  just had the slide sitting under the block and held between block and fondo.  Very common setup on modern Italian boxes.  It’s simpler to build, no worries about glue beading in  inaccessible corners, and if required you could adjust clearance by sanding.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: LMM with one register
« Reply #2 on: February 08, 2025, 08:47:22 AM »

Thank you - I will be gluing the gasket to the fondo, and I'm very comfortable gluing strips-around-holes instead of a sheet-then-punch/cut holes approach (imho, this is a lot of work for zero practical benefit). Unfortunately, gasket made up of strips needs a solid reedblock sole over it, so a naked moving slider won't do.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: LMM with one register
« Reply #3 on: February 08, 2025, 10:25:17 AM »

My experience of gluing gasket and cutting holes is that it's quick and easy.  Glue gaskets, allow to cure thoroughly, use scalpel with new blade to cut holes using the edge of the hole as a guide.

But if you prefer the way you are familiar with here is what Emmanuel does when fixing slides on his one-row wheel are the blocks are fully glued in place.

When all the components are ready rub all the sliding surfaces with paraffin wax.  This does two things - it acts as a lubricant, but it also prevents glue sticking to waxed surfaces.   When applying glue use the absolute minimum and put the slides in place before closing up Once everything is glued and clamped work the registers back and forth every couple of minutes till you are satisfied they are not sticking.  You probably have an advantage that the blocks are not glued in, so you can fully withdraw the slides and clean off any excess glue.
 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: LMM with one register
« Reply #4 on: February 08, 2025, 11:11:52 AM »

I’ve made a couple of fondos laminated from ~1mm ply with register slides running in a slot in the central lamination. When gluing up I have really carefully masked all the areas where it was critical not to get glue, and then sponged or rolled the glue on as evenly as possible before clamping up.
If your design allows for an open end of the slot being accessible while the assembly is clamped, then you can make a dummy register slide out of plastic and move it back and forwards at intervals to ensure that if any glue does ooze a bit it doesn’t dry in a bead that might obstruct things.
It’s always a slightly stressful process but I haven’t managed to accidentally glue a slide in, . . . Yet.

Regarding dimensional changes, I’ve had one of these in a box that has deliberately been given a fairly hard life from French extreme summer heat in a closed van to sailing in a small boat off the Scottish coast over several years and it has remained absolutely fine throughout.

Re. Switches and tuning accuracy. I’ve experienced the same as you with ‘factory’ switch mechanisms that turned out to be caused by a tiny kink in the aluminium slide preventing it moving as freely or fully as it should when the switch was operated with a bit less than full attention.
I’ve experimented with making both thumb operated switches, and top mounted stops - both work fine, but pull stops are particularly simple and reliable. I’ve made them with the rod running through a Teflon bush which holds it securely up without slippage as well as keeping it totally airtight and giving a nice feel to the movement.

Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: LMM with one register
« Reply #5 on: February 08, 2025, 12:09:04 PM »

Thanks folks.
Release agent! I should have thought of that.

I guess the highest risk I'm running here is a couple tenners worth of plywood, a small hole at the top of the box to fill and several hours of my time, so perhaps it's time to stop fearing and learn to love the register sliders.

What are your thoughts or L register vs M+ register for a box pitched in low F? I'm just going to put sliders into one (middle) bank.
Logged

Graham W

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 277
Re: LMM with one register
« Reply #6 on: February 08, 2025, 12:22:45 PM »

I would personally want to switch out the L reeds.
I’m speaking as someone who mostly play GC, and your lowest reeds will be even lower.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: LMM with one register
« Reply #7 on: February 08, 2025, 03:41:16 PM »

I would also say register on L reeds.

One general reason, it changes the perceived octave of the notes, which is a more audible (and arguably musically useful) change than removal of the musette. That's probably why just about every commercial LMM box with a single register is setup that way.

Also, in F/Bb the lower L-reeds will be noticeably slow to speak, option of not having them helps for 'cleaner' fast playing.



Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: LMM with one register
« Reply #8 on: February 08, 2025, 07:02:19 PM »

Interesting - personally, I'd say the difference between LM and LMM+ is a lot more pronounced than LMM+ and MM+. Dry tuning requires more of a staccato note burst approach, while musette is more at home with holding the note and playing legatissimo. Shifting LMM+ to MM+ to me just sounds thinner and an octave higher, so if I was using that I'd flip to MM+ and shift an octave down on the keyboard to compensate. Then MM+ will give quite a different character to LMM+.
I guess it depends if de-tuning on the M is 16c or 8c...
« Last Edit: February 08, 2025, 07:25:21 PM by mChavez »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal