Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Saltarelle Nuage Pallet Reface  (Read 1967 times)

0 Members and 1 Guest are viewing this topic.

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Saltarelle Nuage Pallet Reface
« on: February 22, 2025, 07:54:25 AM »

I am about to acquire a 1990s Saltarelle Nuage and know that the pallets will need refacing. Does anyone know how the pallets will be attached to the levers currently? Will it be glue or wax, or something else. And how might I remove them? I'm just trying to plan the work.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Nuage Pallet Reface
« Reply #1 on: February 22, 2025, 08:41:31 PM »

Glue.

I’m envious of your 90s Nuage acquisition! Enjoy!
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Saltarelle Nuage Pallet Reface
« Reply #2 on: February 23, 2025, 02:29:58 PM »

Probably wax. I generally prise them off and clean out the groove with a narrow bit on an engraver.
I'm of the 'if it ain't broke don't touch it' school of thought, so I'd not bother with refacing unless it's leaking or something like that. I have a similar vintage Nuage, somewhat battered etc. but the only maintenance it ever gets is tweaking the reeds as necessary, and I fitted internal mics.

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Re: Saltarelle Nuage Pallet Reface
« Reply #3 on: February 23, 2025, 03:08:39 PM »

Thanks Mselec and Roger. I'm assuming I can just rock the pallet off. Roger, there is a clacking from the pallets hence refacing. I used to get felt from Charlie at CHM. where is the best place now? Thanks
Logged

ju

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 174
Re: Saltarelle Nuage Pallet Reface
« Reply #4 on: February 23, 2025, 03:31:14 PM »

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Saltarelle Nuage Pallet Reface
« Reply #5 on: February 23, 2025, 03:42:14 PM »

Thanks Mselec and Roger. I'm assuming I can just rock the pallet off. Roger, there is a clacking from the pallets hence refacing. I used to get felt from Charlie at CHM. where is the best place now? Thanks

Sometimes you can get the same effect by simply brushing the leather surface with a soft wire brush.  This removes dust and raises the nap on the leather and results in quieter action.   If the pallets are indeed glued on it might be difficult to remove them.  In that case you can get access the to the leather surface by withdrawing the axle rod and removing the levers and pads intact.  If you've not done this before please ask for advice.  It's usually not difficult but there are some things you need to be aware of.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Saltarelle Nuage Pallet Reface
« Reply #6 on: February 23, 2025, 04:16:15 PM »

Pallet refacing on a 30yo box?  :o

I've had boxes from 1930s and 1950s that did not need re-facing. Only reason to do it is if the felt has been eaten away by moths.
Or if they are mouldy beyond all recognition, but then I'd just slowly back away from the box, because if that's the case, the rest of the box won't be any better.
« Last Edit: February 23, 2025, 04:20:02 PM by mChavez »
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Nuage Pallet Reface
« Reply #7 on: February 23, 2025, 04:35:27 PM »

While it's typical of Italian-made boxes (Saltarelle) to use wax to affix pallet levers to pallets, in this case it does look more like glue (the material is clear, anyhow, and not coloured like typical reedwax).  Most of the Nuages and Bouebes that I've seen have used glue here instead of wax. 

If it's 'clacking' you're hearing, be sure that it's actually coming from worn-out facings and not something else.  In the kind of cantilevered linkage that Nuages have, it's not uncommon for there to be metal-on-metal noise.  There are a few things that can account for this, one of which can be seen in a video that I made about a Nuage for a client a few years ago here:

https://youtu.be/0HLj5Zh5pW0

In the above example, you can differentiate between the pallet-against-the-soundboard noise and the noise of the metal linkages making contact (and not to be mistaken for 'clacking' noise that can occur when the button holes aren't bushed and the button makes contact with the edge of the fingerboard!).  You can also see that glue has been used to affix pallet levers to pallets on this Nuage.

Another thing that can make 'clacking' noises is the other end of each of the cantilevered pallet levers where they are pressed up against the soundboard with a metal frame (the right-hand side in your photo).  Nuages do not use any kind of padding or bushing here (unlike some other boxes) so there can be noise here as well due to a small amount of movement/play between the levers, metal soundboard and the metal frame holding them in place.

Anyhow, I'm not saying the noise you're describing isn't coming from the pallets, I just wanted to help you make sure you correctly identify the source of the problem before jumping in with trying to fix them by refacing all the pallets.  You will have to do some adjusting with the linkages as shown in my video if you do change the pallet facings. 
Logged
C#/D player

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Saltarelle Nuage Pallet Reface
« Reply #8 on: February 23, 2025, 07:30:25 PM »

As a sort of aside, old accordions either use wax or hide glue, which you can melt with a soldering iron (and I have done on quite a few occasions). Otherwise, wot Theo n Mselic sez.

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Re: Saltarelle Nuage Pallet Reface
« Reply #9 on: February 23, 2025, 11:15:12 PM »

Lots of new thinking for me here. Thanks for that. I'm looking forward to receiving the accordion and applying it.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Nuage Pallet Reface
« Reply #10 on: February 24, 2025, 04:05:58 AM »

As a sort of aside, old accordions either use wax or hide glue, which you can melt with a soldering iron (and I have done on quite a few occasions). Otherwise, wot Theo n Mselic sez.

Roger, I wonder if it was hide glue that I've seen in older Saltarelles (like in my video)?...modern Saltarelles do indeed use standard reedwax to affix pallets to levers.
Logged
C#/D player

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Re: Saltarelle Nuage Pallet Reface
« Reply #11 on: March 06, 2025, 12:19:16 PM »

So, I now have the Nuage and I am delighted with it. The Pallet noise is nowhere like I thought from the video I had listened to so no work to do there. The treble buttons however are lower that I would like. I can limit button travel a little but would still like to look into raising them.  Is there a way to do this without bending any levers?
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Saltarelle Nuage Pallet Reface
« Reply #12 on: March 06, 2025, 12:39:01 PM »

The way to raise the buttons in this case is to use a tool that puts notches on the underside of the aluminum levers (the section that the button piston attaches to, running between the button and the axle), essentially spreading the metal out and ‘bending’ the lever upwards. You don’t need a fancy tool to do this; anything plier-like that will indent the aluminum will work. It’s not nearly as daunting as it may sound and it doesn’t take much to make a difference. Be sure that the notches are made on the underside of the lever if you want to raise button height. If you make the notches on the topside of the lever you will lower button height instead. I’ll post pictures later.
Logged
C#/D player

Johnny S

  • Member
  • *
  • Offline Offline
  • Posts: 34
  • B/C Player
Re: Saltarelle Nuage Pallet Reface
« Reply #13 on: March 08, 2025, 06:43:03 PM »

MSELIC. I'd really appreciate that photo if you can find it. I'd like to be prepared before I open it up.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal