As with do many things … it all depends
With wet tuning tolerance can be larger, dry tuning, or single reed needs a closer tolerance. It all depends on what makes an audible difference when you play.
A couple of examples:
First a wet tuning day 20cents spread and tollerance of +/- 1 cent then worst case where one reed is 1c sharp and one is 1c flat the spread will be 22 or 18 cents. I would probably not tell the difference in sound when played together.
Second a typical Castagnari swing tune with 5 cents spread the maximum error with +/- 1c per reed the worst case would be 3 cents or 7 cents spread which would definitely be audible, and not in a good way.
My target tolerance is to have between 0 and +0.5c deviation. That’s not always achievable because it relies on consistent air pressure and very small differences in the reed block position and fixing screw tightness etc.