Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner 114 Thumbstrap replacement  (Read 1971 times)

0 Members and 1 Guest are viewing this topic.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Hohner 114 Thumbstrap replacement
« on: February 26, 2025, 10:47:21 AM »

So, I have acquired this NOS 114C with original box and everything.  Quite nice. Fun. Added rings for shoulder straps.
BUT the original thumb strap is faux leather with no stretch and sharp edges and probably a bit too short for me.
I have drilled out and removed thumb straps from Ericas and Pokerworks (thanks Lester!) so I know how to get in there.
Am thinking of replacing current strap with one cut from left over bass side strap scrap. Should I glue in a nut and then use a  bolt for the fastener?  Or seal it up and "tap" it with a screw?
Any examples or advice appreciated.
--Steve
« Last Edit: February 26, 2025, 10:51:59 AM by Steve C. »
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Hohner 114 Thumbstrap replacement
« Reply #1 on: February 26, 2025, 12:44:36 PM »

chicago rivet works for me with the smooth side of the rivet glued to inside of fingerboard. A little dab of thread locker helps to stop the screw turning but it can still be undone if you decide to go shorter or longer. I wouldnt try screwing into a plastic fingerboard. Ive also seen rivets / nut and bolt used. Ive recently spent time experimenting with the width / thickness and length of thumstraps. Varying these things can make a huge difference but there's no right or wrong. Its a personal thing i think.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hohner 114 Thumbstrap replacement
« Reply #2 on: February 26, 2025, 01:21:27 PM »

Chris, hadn't even thought of a chicago rivet.  Great idea and clean install. Nicer than a nut and bolt for sure.  Plus fills the hole.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 114 Thumbstrap replacement
« Reply #3 on: February 26, 2025, 01:21:42 PM »

Whichever fixing method take care that the part inside the fingerboard has clearance from the nearest lever.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Hohner 114 Thumbstrap replacement
« Reply #4 on: February 26, 2025, 01:31:56 PM »

As per Sylvain Vezina’s method (of Accordeons Mélodie) I epoxy a threaded bolt sticking out from the inside of the keyboard and then use an acorn/domed nut to fasten and tighten a thumstrap into place. The result is very clean looking (a regular nut, less so) and very practical, and anyone can easily change the thumbstrap without any difficulty. Removing the bolt is also easily done using a screwdriver from the inside to give it a turn and break the epoxy seal.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 114 Thumbstrap replacement
« Reply #5 on: February 26, 2025, 02:30:22 PM »

I very much like the very solid thumb strap that Gilles Poutoux describes on his YouTube channel.
I worked out my own way based on his suggestions and the results are here.
https://www.facebook.com/share/p/14ppHapU92/
Lots of different views and nothing is right or wrong, but it works for me. Also having the same type of strap in exactly the same position on all my one-rows means I can always reach for and hit the button I want on any box.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner 114 Thumbstrap replacement
« Reply #6 on: February 26, 2025, 05:16:44 PM »

Good advice on the thumbstrap. It's a highly personal area and experimentation is key.

Having said that, I notice you mention adding rings for shoulder straps and a strap is visible in one of your pictures. If you plan to use a shoulder strap, will you still need the thumb strap (and attendant installation headaches) ?
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hohner 114 Thumbstrap replacement
« Reply #7 on: February 26, 2025, 07:01:39 PM »

Thanks for the avalanche of ideas.

Last shall be first. 
Seems like with all my other boxes I am a 1/2 the time sitter-downer and 1/2 stander-upper so have straps on everything.
BUT the one row is the first time I really give it a go with the thumb strap.  Most Hohner boxes (note previous reference to Lester video) Have removed the thumb strap.
But I was reading Tufty Swifts handwritten method and he says the thumb strap is the way to play the one row; give it a wack.

Threaded rod idea: I like it.  Quick and dirty.  (in a good way).

Pete: Screwed down thumb strap.  Don't you sometimes wish it would rotate a little?  Or do you like to hold/pry against it?

And Theo: you are correct.  Much to go wrong inside there when all is re-assembled.  Ask me how I know. (never seems to happen in Lesters' vids!)

Thanks all.

-- Steve
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Hohner 114 Thumbstrap replacement
« Reply #8 on: February 26, 2025, 09:12:46 PM »

why not use the originally used 2 part rivets?
Logged

Stotty

  • Stotty
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 191
Re: Hohner 114 Thumbstrap replacement
« Reply #9 on: February 26, 2025, 10:23:49 PM »

That era of Hohner thumb straps were appalling.  The sharp edges would literally cut your thumb on the two row pokerwork (early 1980s), where they had two rivets.  I think the slightly longer "italian" style padded leather straps are so much more comfortable to use, and although it is a personal taste thing, I like the thumbstrap to pivot easily.
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Hohner 114 Thumbstrap replacement
« Reply #10 on: February 26, 2025, 10:36:14 PM »

oh yeh forgot about tufty swifts method which he taught me back in the 70s' ..pop rivet gun with washers on the pop rivet. dont squeeze the gun until the rivet pops as there is a danger of fingerboard cracking if its plastic. use a long shank rivet. squeeze the trigger until it the rivet is super tight then stop and saw off the rivet shank. works a treat but how you get the rivet out again if you need to is anybody guess. worked for him and me back in the day. Everybody had a pop rivet back then. we used them to hold our cars together. front wing falling off? pop rivet it back on. Rear leaf springs corroded? pop rivet it back in place. MOT due? whack some  isopon on it! Tufty had all the answers before the internet gave us alternative methods.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner 114 Thumbstrap replacement
« Reply #11 on: February 26, 2025, 11:07:48 PM »



Pete: Screwed down thumb strap.  Don't you sometimes wish it would rotate a little?  Or do you like to hold/pry against it?


I just stick my thumb in it .  Being pretty stiff it behaves like a permanent link between my flexible hand and the rigid keyboard.
If it was flexible or swivelling this really wouldn't work.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hohner 114 Thumbstrap replacement
« Reply #12 on: February 27, 2025, 10:43:38 AM »

Pete, it makes sense. I might try.
Like the original (?) Hohner 2 rivet set ups which did not rotate.
I feel like I do use the rotation on my current imitation leather to reach the lower notes.
BUT with softer leather and removing the "cut off yer thumb" edges on this fake stuff might be able to reach better...
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner 114 Thumbstrap replacement
« Reply #13 on: February 27, 2025, 12:06:01 PM »

Pete, it makes sense. I might try.
Like the original (?) Hohner 2 rivet set ups which did not rotate.

I find the two part rivets sold for leatherwork are effective in this application and leave a smaller projection on the inside of the keyboard, and have a nice shiny finished appearance on the outside. 

This sort of thing
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner 114 Thumbstrap replacement
« Reply #14 on: February 27, 2025, 03:20:23 PM »

Quote
I feel like I do use the rotation on my current imitation leather to reach the lower notes.
BUT with softer leather and removing the "cut off yer thumb" edges on this fake stuff might be able to reach better...

It depends... The rotation and a long flexible thumbstrap are probably useful for a thumb-on-top of the keyboard position as used by Johnny Connolly. No rotation/stiffer leather is probably better for thumb-on-rear-corner or thumb-in-back positions. There is quite a spectrum of possibilities (see pictures).

Chicago bolts, bolt or screw type fasteners permit adjustment, rivets are more permanent.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Hohner 114 Thumbstrap replacement
« Reply #15 on: March 14, 2025, 03:01:09 PM »

Chris, Theo, et.al.
Have temporarily installed a new strap with chicago rivets as suggested by Chris.  NIce.
The leather I had was too thick so waiting on some thinner pieces.  Web is nice and soft but too slippery.
See attached.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal