Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Corso proplem  (Read 918 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Hohner Corso proplem
« on: April 03, 2025, 09:40:58 AM »

Big problem in Corso,
I noticed that air was leaking from under the reed block. Reed block is straight, But the lid seems to be convex ,,
gap about 0.6 -0.7mm,,    Can the lid be straightened, or a thicker gasket be installed? Good advice is needed,,  :-[
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner Corso proplem
« Reply #1 on: April 03, 2025, 10:06:35 AM »

only the fingerboard side reed block leaks, the others are tight
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Corso proplem
« Reply #2 on: April 03, 2025, 10:22:14 AM »

I’ve develop a fix for this on Club 2/Erika.  It might or might not work on Corso with three blocks instead of two. Are all three blocks affected?

I’ll find some photos of what I’ve done.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner Corso proplem
« Reply #3 on: April 03, 2025, 10:26:28 AM »

Endast ett block läcker
Logged

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner Corso proplem
« Reply #4 on: April 03, 2025, 10:31:07 AM »

I’ve develop a fix for this on Club 2/Erika.  It might or might not work on Corso with three blocks instead of two. Are all three blocks affected?

I’ll find some photos of what I’ve done.

only one block is leaking
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Corso proplem
« Reply #5 on: April 03, 2025, 10:58:47 AM »

Here is a photo of an old example of how I fix the warped fondo.   You can see the bracing rib attached beside the the reed block.  There is another out of sight beyond the reed blocks.  I've removed the normal reed block locating blocks. The rib is screwed in place from the pallet side.  The rib is carefully shaped with a concave surface so that as the screws are tightened the rib and the fondo pull together just enough to get the fondo perfectly flat.  It takes a bit of trial and error to balance the stiffness of the rib and the degree of curvature to give you the flat fondo.  The rib in the picture is also glued in place after all the adjustments have been made.
« Last Edit: April 03, 2025, 11:03:56 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner Corso proplem
« Reply #6 on: April 03, 2025, 11:09:36 AM »

Ok,, Thanks, I was thinking something like this too, I need to get some hard wood from the carpenter  (:)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Corso proplem
« Reply #7 on: April 03, 2025, 11:50:07 AM »

I’ve used beech or maple.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner Corso proplem
« Reply #8 on: April 03, 2025, 03:37:19 PM »

 (:) Ok...
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner Corso proplem
« Reply #9 on: April 03, 2025, 04:49:47 PM »

I had the same problem with my Busillachio, and followed Theo's advice. Not knowing about wood (to me a hardwood was keruing, which we used for wagon body floors in the old days) I used a bit of 9 ply 3/4 plywood as a stiffener. It has worked fine, so far!
Good luck with your box.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Hohner Corso proplem
« Reply #10 on: April 03, 2025, 05:08:58 PM »

When I had this problem on my Shuya, I just replaced the fondo with a new one.  >:E
But I've seen thick window insulation tape being used to fix an issue like this.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Hohner Corso proplem
« Reply #11 on: April 03, 2025, 07:18:14 PM »

Another method is to mill or router the reedblock contact area flat then add a new closed foam gasket in the shallow 'pocket'. It is perhaps more effort than other methods but results were excellent.


Scott
Logged
too many boxes...please buy one, or two, or

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: Hohner Corso proplem
« Reply #12 on: April 04, 2025, 05:06:16 PM »

I had the same problem with my Busillachio, and followed Theo's advice. Not knowing about wood (to me a hardwood was keruing, which we used for wagon body floors in the old days) I used a bit of 9 ply 3/4 plywood as a stiffener. It has worked fine, so far!
Good luck with your box.

I think Theo's advice is good.  (:) :|||:
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal