Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Homemade metal bellows corners  (Read 1168 times)

0 Members and 1 Guest are viewing this topic.

Steve Mallas

  • Member
  • *
  • Offline Offline
  • Posts: 9
Homemade metal bellows corners
« on: April 09, 2025, 10:26:48 PM »

Does anyone have any info on metal bellows corners? I’ve searched through the forum and there’s loads of threads about metal corners but I can’t find the info I’m actually looking for.
What material are they made of? I’ve read brass, stainless steel and aluminium but what about something shiny like cupro nickel? Or is there anything better? What thickness is the metal? Finally what dimension is the inside gap? I know I can buy them but I want to make them and rather than pull one off my perfectly complete melodeon to measure it, I reckon someone in here would know.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Homemade metal bellows corners
« Reply #1 on: April 09, 2025, 10:43:42 PM »

In my repair work I’ve seen metal corners made of steel, brass, nickel and stainless steel.  Brass can be plain, nickel plated or even gold plated. Thickness of material typically between 0.28 and 0.35mm.  There are also many different shapes and sizes.
They are cheap to buy so I’ve not felt inclined to try making them, but some simple, well designed, press tools should do the job.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve Mallas

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Homemade metal bellows corners
« Reply #2 on: April 09, 2025, 11:40:10 PM »

Ideal thanks for your reply 😊
Logged

Steve Mallas

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Homemade metal bellows corners
« Reply #3 on: April 10, 2025, 06:22:41 AM »

What would you say a typical inside gap dimension would be?
Logged

Fanie

  • Good talker
  • **
  • Offline Offline
  • Posts: 91
Re: Homemade metal bellows corners
« Reply #4 on: April 10, 2025, 07:06:57 AM »

A while ago somebody posted pictures and a video of the gadget he made to make bellow corners from empty canned fruit cans. I tried it and it worked perfectly.
Logged

Steve Mallas

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Homemade metal bellows corners
« Reply #5 on: April 10, 2025, 07:38:32 AM »

Thanks that sounds interesting I’ll have search for that
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Homemade metal bellows corners
« Reply #7 on: April 10, 2025, 08:20:33 AM »

What would you say a typical inside gap dimension would be?

I side gap just needs to be big enough to slip over the bellows fold before being crimped in place.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve Mallas

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Homemade metal bellows corners
« Reply #8 on: April 10, 2025, 10:51:41 PM »

Thanks again. It’s so I can make a bending tool. I need an idea of what that measurement would be in order to make the tool, but actually if I measure the total outside width of a metal corner whilst it’s fitted to my melodeon then I can subtract the thickness of the metal x2 (which you kindly shared with me) then what were left with is the inside gap😊
Logged

Steve Mallas

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Homemade metal bellows corners
« Reply #9 on: April 10, 2025, 10:54:13 PM »

Thanks for the link Fanie I’m going to watch that now 👍
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Homemade metal bellows corners
« Reply #10 on: April 10, 2025, 11:44:57 PM »

Quote
Thanks again. It’s so I can make a bending tool. I need an idea of what that measurement would be in order to make the tool, but actually if I measure the total outside width of a metal corner whilst it’s fitted to my melodeon then I can subtract the thickness of the metal x2 (which you kindly shared with me) then what were left with is the inside gap😊

FWIW, I have a bag of commercially-available corners here and the total outside width is around 4.5mm. This is rather more than the typical installed width which varies but rarely exceeds 4mm (the first 2 bellows I measured were around 3.5).
Logged

Steve Mallas

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: Homemade metal bellows corners
« Reply #11 on: April 11, 2025, 06:47:41 AM »

Thanks for that. That’s what I’ll start with
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Homemade metal bellows corners
« Reply #12 on: April 11, 2025, 07:38:28 AM »

Here's a few photos of a corner bending jig by Sergei Akimov. Made from a piece of alloy flat bar and a cut-up file.
Use google translate.

https://poigarmonika.ru/garmon-tehnicheskie-aspekty/prisposoblenie-dlya-formirovaniya-mehovyh-ugolkov.html


You're better off buying them and you should be able to find them in just about in any material and size. Check out book making supplies, etc. Very hard to justify the time & effort required to make your own, imho.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal