Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Keyboard screws for Hohner Pokerwork/Erica model  (Read 591 times)

0 Members and 1 Guest are viewing this topic.

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Keyboard screws for Hohner Pokerwork/Erica model
« on: April 13, 2025, 11:58:33 AM »

I've just opened up an old junker of a pokerwork I picked up a few months back. It had a wonky keyboard and I've just found out why. I've opened it up to find that only one screw holding the keyboard in, it is mangled and doesn't look to be the correct size. The other side of the keyboard appears to have been cleverly fixed in place with wax  :o

Can anyone tell me the correct size and type of screws for a Hohner keyboard fixing please?

Thanks

Edit: yes I know I can measure screws, but neither my eyes nor my tape measure are confident in differentiating between 2.5mm and 3mm diameter.

« Last Edit: April 13, 2025, 02:40:28 PM by Helena Handcart »
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Keyboard screws for Hohner Pokerwork/Erica model
« Reply #1 on: April 13, 2025, 02:51:45 PM »

I'll find you some.
I have plenty.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Keyboard screws for Hohner Pokerwork/Erica model
« Reply #2 on: April 13, 2025, 08:30:48 PM »

If it’s a plastic keyboard they are usually M3 but not easy to find the correct length.  If Pete can’t find you some I have them.  If it’s a wooden keyboard they are long wood screws.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Keyboard screws for Hohner Pokerwork/Erica model
« Reply #3 on: April 14, 2025, 11:20:15 AM »

Thanks to Pete and Theo, Pete has confirmed the correct ones are M3 x 40mm and I have some ordered.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal