Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Broken Reeds  (Read 2043 times)

0 Members and 1 Guest are viewing this topic.

gm0lze

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 101
Broken Reeds
« on: April 15, 2025, 04:19:38 PM »

I hope this post is allowed on the melodeon forum.
My pal keeps breaking the reeds in his Ottavianelli accordion.Any ideas what would be causing this.The box is italian with apparently italian reeds.Any help would be appreciated.
Thanks.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Broken Reeds
« Reply #1 on: April 15, 2025, 06:07:23 PM »

It could be a combination of factors. Is he an energetic player ?? I notice one of the reeds is rusty and bent.
Logged

gm0lze

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 101
Re: Broken Reeds
« Reply #2 on: April 15, 2025, 06:58:21 PM »

He can be somewhat energetic when playing in a live situation.
Logged

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Broken Reeds
« Reply #3 on: April 29, 2025, 11:01:51 AM »

Sorry, can't answer the question, but, if it helps, Accordeons Paris Sud (easily found on the 'net) supply reed tongues and rivets, as well as the usual spares and materials. I've had excellent service from Yoann, but had to resurrect >50-year-dormant schoolboy French and use Google Translate...
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Broken Reeds
« Reply #4 on: April 29, 2025, 11:58:58 AM »

This one really puzzles me. I've seen multiple vendors selling reed tongues and rivets. Why?
90% of skilled reedwork goes into fitting the tongue and riveting it accurately in place. The closer the fit, the more time & skill required. Also, you need a couple specialist tools for riveting.

So why would anyone ever buy random reed tongues that are guaranteed not to be a perfect fit for their plates? If you have the skill (and time!) to fit your own tongues and rivet them, then cutting them out of a strip of steel is a 5-minute job at most.

Or is it the case of: buy random tongues, find closest fit, rivet, then spend time tweaking the profile and tuning to end up with something that plays worse than "dural" line because of the huge gaps?
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Broken Reeds
« Reply #5 on: April 29, 2025, 06:43:48 PM »

mChavez - it always puzzled me, too.

OP - reed breakage tends to happen with very hard playing, and generally more likely to happen with higher-pitched reeds. But it’s not something that is a common occurrence (I can sometimes play loud and hard and I’ve never, ever broken a reed). Are there any markings on any of the reedplates to indicate the make? Given that several have broken already, it’s seems quite possible that continued loud/hard playing might result in additional reeds breaking…
Logged
C#/D player

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Broken Reeds
« Reply #6 on: April 29, 2025, 09:05:18 PM »

Nothing I'm particularly proud about, but there was a time when I used to yank really hard on the dom7 - F on a C one row, or G on a D. These were always the reeds that broke on Hohner instruments. So much so that I kept a permanent  stash of replacements. It has to be noted that I have never had the same problem with Italian instruments. Could be that I have learned to temper my playing. Dunno???

On a similar tip I would like to note that I am quite hard on bellows corners. I currently play a NOS late 50's Hohner Black Dot B/C. I have played this from factory condition for three years and the back bellows have worn to the point where they need replacing. I also own a cheap as chips East German Meteor which I have played hard for 10+ years. Through most of lockdown I kept it next to the fire and played it most of my waking hours. There is not a mark on the bellows !?!?!?
Logged
Semper idem, sed non eodem modo

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Broken Reeds
« Reply #7 on: April 30, 2025, 07:46:44 AM »

This one really puzzles me. I've seen multiple vendors selling reed tongues and rivets. Why?
90% of skilled reedwork goes into fitting the tongue and riveting it accurately in place. The closer the fit, the more time & skill required. Also, you need a couple specialist tools for riveting.

So why would anyone ever buy random reed tongues that are guaranteed not to be a perfect fit for their plates? If you have the skill (and time!) to fit your own tongues and rivet them, then cutting them out of a strip of steel is a 5-minute job at most.

Or is it the case of: buy random tongues, find closest fit, rivet, then spend time tweaking the profile and tuning to end up with something that plays worse than "dural" line because of the huge gaps?

Well, I admit I haven't (yet) fitted a new tongue to a reed plate, but I have decades of working in metal, to fine limits, and would far rather fettle a pre-cut and perforated tongue than have to source suitable material and cut it. I have cut shims from shimstock: avoiding or correcting deformation at the cut edge is difficult, and making punches is taxing. It's to be avoided if at all possible! As for rivetting, a suitable hammer and simple rivet set should be enough. I've adjusted the position of the tongue and tightened a few rivets quite easily.

So, fitting the tongue to the block seems fairly straightforward, at least for the heftier reeds. However, getting the tongue's thickness profile correct - if the tongue is profiled - is something that I would expect to require a reed-maker's skill and experience. So I agree in part; life is too short for this sort of diversion, for most of us, and I also am surprised to see tongues for sale. Someone must buy them. Own up!
« Last Edit: April 30, 2025, 08:05:59 AM by Jerry in NZ »
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Broken Reeds
« Reply #8 on: April 30, 2025, 08:05:09 AM »

Well, I admit I haven't (yet) fitted a new tongue to a reed plate, but I have decades of working in metal, to fine limits, and would far rather fettle a pre-cut and perforated tongue than have to source suitable material and cut it.

Given your extensive metalworking experience, I hope you don't just make the schoolboy error of assuming that the tongue perforation and the plate perforation will happen to be aligned to the required tolerances? ;)
Typically, you either:
- Shape the slot, fit the reed, then perforate it while it's held in its slot on a special jig;
- Perforate an oversized reed, then fit it;
- Perforate an oversized reed, then expand & shape the slot.

With reedwork, riveting is not about a hammer whacking a simple rivet. It's about adjusting the tongue to fit the slots perfectly while you're tightening the rivet so it ends up right where it needs to be. It's not quite the same job as whacking a few thousand rivets with a rivet gun when assembling something like a landrover.

Furthermore, FYI, on reeds that are worth playing (i.e. hand-made and many hand-riveted grades) every reed slot has the relief filed by hand so each slot will be slightly different from the same note on the next reed set. How do the tongue suppliers account for that? I guess they don't.

It's not rocket science - melodeons are a bit more complex than that, you know  :P
« Last Edit: April 30, 2025, 08:08:38 AM by mChavez »
Logged

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Broken Reeds
« Reply #9 on: May 01, 2025, 11:45:10 AM »

mChavez You replied whilst I was modifying what you had read, I think. I really should not post whilst my brain is going half-speed...

I can only agree with what you say. The tongues are offered in various shapes and sizes, but I don't know whether that covers the whole range that might be required. No, I wouldn't expect the tongues to fit without trimming. I assume one selects the 'nearest fit' (oversize) and files its edges to fit the plate, gauging by eye, not by sophisticated metrology. I suppose that's what the reed-maker does... Fairly straightforward, if tedious. Getting the thickness profile correct, though, is surely where the real skill comes in.

And as for Land Rovers, still your tongue! 30 years on, I'm still suffering post-traumatic stress disorder after being the owner and constant repairer of one of those unspeakably foul abominations.  >:E
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Broken Reeds
« Reply #10 on: May 03, 2025, 06:32:19 AM »

If a player is breaking reeds in a 'live' situation (as mentioned above), then perhaps they need to sort out some amplification. I had a customer that kept coming back with broken reeds. Eventually i found out he was playing live with a band but had inadequate (or non existent..can't remember now) amplification. Once this was sorted he stopped breaking reeds.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Broken Reeds
« Reply #11 on: May 05, 2025, 10:29:24 AM »


I can only agree with what you say. The tongues are offered in various shapes and sizes, but I don't know whether that covers the whole range that might be required. No, I wouldn't expect the tongues to fit without trimming. I assume one selects the 'nearest fit' (oversize) and files its edges to fit the plate, gauging by eye, not by sophisticated metrology. I suppose that's what the reed-maker does... Fairly straightforward, if tedious. Getting the thickness profile correct, though, is surely where the real skill comes in.

I'm not a professional reedmaker - only made about a couple dozen reed pairs, of which only about half a dozen ended up played in boxes - the rest were just to experiment.

You are correct about the making process apart from profiling. Overall, there is nothing hard about it and the main challenge is that it's extremely time consuming, even if you cut the plates on a laser.
Re profiling, there is actually a surprisingly wide range of profiles that work well and give you the right frequency. Profiling is easy, apart from the act of removing hardened steel from the tongue - that part can tire your hand's joints pretty quickly if filing by hand.
No real skill required here for manufacturing - the knowledge is in knowing what reed size, shape, profile and stiffness will work for the particular tone you're after if you are designing your own reed set.

If you're talking about replacing broken reeds, size & shape decisions have already been made for you, so you just need to find a suitable strip of steel (brass, phosphor bronze, nickel silver - there's many valid alternatives that produce excellent reeds, so all this talk about "quality of steel" is just hot air coming from accordion salesmen and folks who never made a reed themselves, if you ask me) and profile it until it matches the pitch & stiffness of the original set.
« Last Edit: May 05, 2025, 10:39:12 AM by mChavez »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Broken Reeds
« Reply #12 on: May 06, 2025, 09:13:07 AM »

The couple of times I've made replacement reeds, I started with a recycled PA tongue and worked from there. I really struggled with the riveting in place part of the process, which (it seems to me) is much harder than filing a reed tongue (something I've done a lot). The only time I went through the process was to replace reeds on a long plate (as found in Chemnitzer concertinas).
MChavez…can you show/describe the tools for riveting? The problem I had was the hole in the reed and the hole in the plate weren't quite the right size. I drilled out the hole in the plate to match the reed. I don't have a set metal punch's ..which might have been useful. Plus where does one source the correct rivet ..these things are small. So I was hamstrung by not really having appropriate rivet/punch etc. As I say, the filing to size is the easy bit (imo).

Paul Bryan

  • Member
  • *
  • Offline Offline
  • Posts: 37
Re: Broken Reeds
« Reply #13 on: May 06, 2025, 06:17:09 PM »

hi all parts you are talking about can be purchased from carini  in italy ie rivets and anvile which you could make from a chunk of rail track or drill a shallow hole in the flat part of a metal vice buy a riveting hammer to round over the reed rivet
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Broken Reeds
« Reply #14 on: May 06, 2025, 06:52:08 PM »

You need a very narrow anvil with the hole drilled if you want to rivet "solid plates" aka "gang-mounted" ones. Otherwise the rivets on the neighbouring reeds will press against the anvil.

Rives can be bought just about anywhere - no point waiting 3 months for Carini to post to you. But I've been told it helps to have a stock of mild steel rods in different diameters to make your own rivets for repair purposes. Never tried it myself.

Hole alignment is where the trick is. what Rog is describing is pretty much the issue I've highlighted above. Your holes won't be aligned.
The way I've been shown is to fit the reed first, then hold it in the slot and punch it in a special press jig. I just use a cheapo sheet metal hole punch mounted upside down. But it's awkward and only goes down to 3/32 in diameter. So I have only 3/32" rivets to work with. I'll snap a pic when I get some time to dig out the jig.
But you need to start with a strip of steel that does not already have unwanted holes punched in them.

Fitting reeds to slots is easy? I can fit them as "well" as Hohner T plates with my eyes closed (doesn't take much) but my best fitting was somewhere at the lower end of TAM equivalents. So far I have not been able to come anywhere near the A Mano quality and the work of highly skilled reedmakers of the past.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Broken Reeds
« Reply #15 on: May 06, 2025, 08:15:31 PM »

This video overview/demonstration of making a Binci reedplate may be of interest: https://www.youtube.com/watch?v=vRu3bSofKRg
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal