Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Re-fitting an old Corso  (Read 3129 times)

0 Members and 1 Guest are viewing this topic.

Ingelund

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re-fitting an old Corso
« on: December 13, 2009, 06:57:40 PM »

About a year ago, I bought a Corso G/C for my son, as a Christmas gift. I found it on eBay in Germany, and after some days, I got the package. The Corso looked very nice, but when trying to play it, it occurred to be a C/F....

I found out that I had to give him my reedblocks, so he would have a complete box with the right tuning. I asked Olav Bergflødt, if he had some old blocks or reeds, and he adviced me to check melodeon.net. And that is how I found this site.

At almost the same time, I decided I would start building a box from scratch, and had a set of Binci a mano reeds in my drawer. These reeds was now changing course, and found it's way into my Corso.

And this is what I'm going to tell a little about here in this thread.
I have to blame my son for this, since he now has started to build his own two-row box. He took pictures, and told he would write about it in some netsite. We had a little talk, and found out we should write here about the different projects we work with.

He is now awaiting his answer from the site.


Logged

Ingelund

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Re-fitting an old Corso
« Reply #1 on: December 13, 2009, 07:16:47 PM »

I will start with some pictures of the reedblocks, and reeds, more will come soon.
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Re-fitting an old Corso
« Reply #2 on: December 14, 2009, 03:57:39 PM »

Quite impressive, especially the centre "shared" treble block.
A pity that there were no pictures taken while they were being made!
Looking at the end of the blocks it appears that the centre partition itself is quite thin, so is the shaping of the chamber floors done with individual pieces?
Logged

Ingelund

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Re-fitting an old Corso
« Reply #3 on: December 14, 2009, 04:14:33 PM »

Yes, they are individual pieces, in four different thicknesses, as I remember. I will have a look later today, maybe I have some more pictures.
Anyway, me and my son are starting up each our two row from scratch these days, and this will be done in the same way.
It's a lot of work, but quite satisfying to sit there with the result.

And thank You for the nice words.....

Inge.
Logged

Ingelund

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Re-fitting an old Corso
« Reply #4 on: December 14, 2009, 06:57:01 PM »

Here are some pctures, that shows the shape of the individual chambers.

Also enclosed a couple showing pretuning of reeds.

Inge.

Logged

Ingelund

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Re-fitting an old Corso
« Reply #5 on: December 16, 2009, 08:39:53 AM »

Since the Binci reeds are longer than the originals, all the reed blocks had to be renewed. The new blocks are made from black alder, wich is easy to come by in Norway, and nice to work with.

The holes in the base of the blocks are cut with jigsaw, and sanded.

The G-row is now ready tuned, and it sounds beatiful. I tune it quite wet, I think that is what sounds best for folk music.

The reeds for the V-row is pretuned, and I will start waxing in near future.

I also plan to upgrade the mechanics, or rather change it all. Hope to start with this during Christmas. :||:
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Re-fitting an old Corso
« Reply #6 on: December 16, 2009, 06:04:50 PM »

Fascinating stuff Inge, I'm intrigued by your tuning bellows. I that an adjustable slot housed within a handle that is also used to operate the bellows?

Pete.  (:)
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Ingelund

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Re-fitting an old Corso
« Reply #7 on: December 16, 2009, 11:06:53 PM »

Thank you Pete.
But it is just a simple bellow, with interchangeable top plates. The plate on the picture, has all needed slots for my Corso, so I can test or tune different combination of reedblocks.
I made the bellow in with a top, that easily can be fitted in a table, and operated with a pedal. Will hopefully be space for it next winter.

I also made a small block to test or tune single reeds. This takes most reedsizes, and is very easy to use.

I enclose some pictures, that shows the details.

Inge.
Logged

Ingelund

  • Member
  • *
  • Offline Offline
  • Posts: 11
Re: Re-fitting an old Corso
« Reply #8 on: January 01, 2010, 05:36:17 PM »

Hello again, and HAPPY NEW YEAR to all of you.

During Christmas, there has been some progress in the work with my Corso. All the reeds
are pretuned and waxed in place, and the complete reedblocks are mounted in the
box..... AND IT SOUNDS.... very nice, in fact.

Some final tuning has to be done, but I will play it a little now, for the reeds to "set". I guess
there will be some small changes in the tuning during the first hours of playing.

But I am very happy with the result, this is after all, my first project with reeds and stuff. But
it will not be the last. I will have to wait a little with the new mechanics, since my son is eager
to continue with his self build project. I have started, and I am a little ahead of him at this point.
I have the bellow almost ready, and most of the panels for the box are close to finish.

So the next now, will be to make a jig, to mount my son's bellow. While he is working on this,
I hope to do something to the Corso mechanics, but I'm not sure what method I will use. Right
now, I'm thinkin of a stable rail, from wood, carbon fibre and aluminum.


I have enclosed some pictures, that shows the mounted reed blocks, just after the first test...
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal