Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Any help?  (Read 1224 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Any help?
« on: April 26, 2025, 10:45:24 AM »

Does anyone have an idea of what this could be? (Apart from being a CBA, that is.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Any help?
« Reply #1 on: April 26, 2025, 11:42:16 AM »

An attached label, any info please?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Any help?
« Reply #2 on: April 26, 2025, 11:44:34 AM »

5-row B system CBA.

"Debut" bayan from the Moscow bayan factory.
Old soviet box, but not too old, as they've stuck to 3-row bayans even at professional level until about 1970s.

As you can guess from the name, it's an entry-level mass-produced box.

Should be OK to try out B system if you fix all of the issues with reedwork, set-up and woodwork that have most likely been there since it came out of the factory.
« Last Edit: April 26, 2025, 11:51:38 AM by mChavez »
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Any help?
« Reply #3 on: April 26, 2025, 11:48:34 AM »

Sticker label is missing a part. Right now it reads "Victoria Topol", which is a valid name & surname, but it looks like there were other letters on the missing part, so it could be "Victoria, Sevastopol" for example. Perhaps an old music store?

We'll probably never know.
« Last Edit: April 26, 2025, 11:57:24 AM by mChavez »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Any help?
« Reply #4 on: April 26, 2025, 06:07:53 PM »

Thank you! I had hoped that you wold see the question, as it seemed right up your street.
Not much value, then? Even in good playing condition?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Any help?
« Reply #5 on: April 26, 2025, 07:14:55 PM »

Not very valuable, no.
Depends on the target audience and your definition of "good playing condition". Are you planning to learn B-griff? It should be fine for learning.

Quality wise, this bayan falls very short of a mid-range Italian box. I don't know about the timbre, I suspect it might be OK. Overall, I expect it to be much better than some other old Soviet 5-rows, especially the monstrosities from old Ukrainian factories, like the 5-row "Orfey".

Just out of interest, what's the bass arrangement?
A true bayan will have 4-5 voice bass fundamental with 2-voice chords, both chord voices in unison (i.e. same octave). Lowest fundamental octave has extended scale length reeds.
In contrast, Italian "button accordions" tend to have have 5-voice fundamentals and 3-voice chords in 3 octaves. Lowest fundamental octave is often very short scale compared to bayans.
The difference is very audible and personally I much prefer the bayan.


Having said all that, you don't see many 5-row B-griff boxes around at all. Modern 5-row B-griff has got a different fingering system compared to traditional 3-row. I used to be semi-OK on 5-row B, but I could not make a tune out of a 3-row without re-learning the fingerings.
In good playing order this 5-row "debut" might be a dream come true for many music schools in post-soviet space where folks can't afford new 5-row Tulas and can't find any old 5-row boxes for kids to practice.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Any help?
« Reply #6 on: April 26, 2025, 10:55:07 PM »

That's great info, thanks. Are you saying that some of the bass reeds, being "extended scale length", may be similar to Helicon reeds?
I don't have it, yet, but I am thinking about taking it on. If it comes cheap enough, I might scrap it for the bass reeds.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Any help?
« Reply #7 on: April 27, 2025, 08:02:15 AM »

Chances are they are not good reeds in a mass-produced box :(
Also some soviet factory reeds used to have the weights riveted on instead of brazed on  :o. Which makes it harder to remove them and leaves you with a reed tongue that's got two holes in it.

I believe that different factories had different scales for bass reeds, and quality varied a lot year-on-year.
Usually shorter than "proper" helikons, but longer and have smaller braze-ons compared to the undersized, heavily weighted bass reeds you tend to find in accordions.

Depending on your definition of "cheap enough". The best (& only) thing about this "debut" is that is gives you cheap access to a 5-row CBA. If you're talking £50-100 local pickup, that's a no brainer for trying out B griff.
At £400 you're probably overpaying, especially if the condition is far from 100%.
I wouldn't scrap it if it plays, and for some of the refugee folks who play B-griff this might be the best bayan they would have seen so far, so don't kill it if you don't have to.

PS I've got a bag of Ukrainian oversized bass reeds that you can have for a tenner. Nasty-ish factory jobbies with riveted weights unfortunately. Initially I was going to coin & chisel them, but I'm planning to try making my own bass fundamental reeds this summer, almost bayan-style with wider tongues and longer scale. I've made about a dozen treble plates before from scratch, so oversized basses should be similar enough and I just need 16 pairs for an extended range hromka.

I'll try to take a comparative photo of pro-grade hand-made bayan reed, factory bayan reed and the accordion one when I get a minute.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Any help?
« Reply #8 on: April 27, 2025, 09:33:25 AM »

Here you go. Happened to find low A#. Left to right:
Factory-made "bayan-scale" reed; Pro-grade hand-made "Polyana" bass plate; Hohner Artiste reed. All at the same pitch. I don't have any baby-sized ;D Italian accordion reeds in my possession at the moment.

The Artiste is, in fact, already a few mm longer and about 0.5-1mm wider than what you tend to find in Italian accordions (!!!).
The factory job is longer. I have these in my Vostok, and after coining, chiselling and even a wee squeeze in a vice ( :o don't try it at home without adult supervision!) to close down the gaps, they perform and sound very sweet.
The "solid" plate reed between them is highest quality, best-bass-reeds-money-can-buy job. Notice the extra width (!) and length compared to the Artiste. The braze-on area is quite large, but the thickness of the braze on is very low (I now realise that you can't quite see it from the photo).

PXL-20250427-082032234" border="0
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Any help?
« Reply #9 on: April 27, 2025, 09:42:41 AM »

Oooh! "Nasty-ish factory jobbies" sound right up my street, mChavez. I'll see if I can find a tenner and I'll be in touch.
Thanks again for your invaluable insights!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Any help?
« Reply #10 on: April 27, 2025, 10:15:55 AM »

That includes postage  ;)
They are quite nasty, you have been warned. Nothing that can't be fixed with a chisel though.

Your issue might be trying to fit something this long into a regular squeezebox. All oversized designs that I've had used some smart thinking to accommodate the reeds.

Hohner Morino Club (German-era) and Excelsior 980 (uses bayan-sized lowest octave reeds) have a double-level fondo. Essentially, a "trench" in which these reedblock sit. Club was only an extra 1cm or so, to accommodate the extra 1cm for the reeds. The 980 has the whole reedblock sitting much much deeper than the rest of the fondo.

Many Italian accordions that use oversized reeds do it via the "Winkelbass" arrangement: lowest octave mounted above other reedblocks at 90 degrees. I've seen this in a Serenellini ( I think) and I've had it in my Accordiola CBA.

Soviets had flat fondos, but the oversized reeds were mounted in such a way that the tall bass reedblocks would "tetris" their way into a gap between treble reedblocks when the box is closed.

Hohner 234/235 had helikons flat-mounted on the fondo.

The most incredible bass arrangement I've seen was in a rare diatonic from the final days of Russian Empire (Actually, that particular box was made a couple years after the Soviet revolution but the design was from late 19th century). It had (actual) bass cassotto for the lowest octave (!!!) with bass reeds mounted in 3 levels. See pic below.

PXL-20240501-123720634" border="0
« Last Edit: April 27, 2025, 10:22:59 AM by mChavez »
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Any help?
« Reply #11 on: May 01, 2025, 10:47:24 PM »

My CBA bass reeeds:
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal