Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Cleaning old pallets and fondo  (Read 3401 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Cleaning old pallets and fondo
« on: April 27, 2025, 06:32:30 PM »

Hi, I’ve just started restoring an old Club I Piccoletta. What’s a good and simple way of removing the effects of 90 years worth of dust and grime from the pallets before I reface them?.. Thanks
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Cleaning old pallets and fondo
« Reply #1 on: April 27, 2025, 06:47:36 PM »

A light rub on a sheet of fine (ish) sandpaper?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Cleaning old pallets and fondo
« Reply #2 on: April 27, 2025, 07:19:08 PM »

Thanks Winston, I thought about doing that but the pallets are those old types that have a concave curve at the top and bottom making it a bit awkward, also the edges of the fondo would be difficult to reach. So, I was wondering if there might be some kind of liquid like vinegar or something that anyone uses…
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cleaning old pallets and fondo
« Reply #3 on: April 27, 2025, 07:35:56 PM »

With a sheet of sandpaper glued onto a flat board, plywood, or MDF
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Cleaning old pallets and fondo
« Reply #4 on: April 27, 2025, 07:47:42 PM »

Thanks, I’ll go with the sandpaper then!..
Logged
Dancing about architecture since 1997

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Cleaning old pallets and fondo
« Reply #5 on: April 27, 2025, 08:32:50 PM »

Sanding inside concave curves is made easier by wrapping sandpaper around a piece of dowelling.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Cleaning old pallets and fondo
« Reply #6 on: April 27, 2025, 08:51:12 PM »

Good advice, I think I’ll make some sandpaper sticks to avoid sanding my fingertips!..
Logged
Dancing about architecture since 1997

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Cleaning old pallets and fondo
« Reply #7 on: April 27, 2025, 09:47:44 PM »

If it's only to remove dust an grime, vacuuming followed by a (not too) damp rag usually works well for me. Removing old glue from under the pallets (after removing them from the lever arm) is where the sandpaper comes in. Not sure why you would want to sand the fondo.
Logged

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Cleaning old pallets and fondo
« Reply #8 on: April 27, 2025, 11:05:08 PM »

Whatever you do (and I don't think this is that type of box)

Do not use methylated spirit to try to clean the fondo of one of the "German Type" black boxes. The black  (shellac?) laquer is spirit soluble and....you can imagine the rest.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Cleaning old pallets and fondo
« Reply #9 on: April 28, 2025, 12:51:12 AM »

Good advice, I think I’ll make some sandpaper sticks to avoid sanding my fingertips!..
Another method is to just roll the sandpaper into a cigarette shape of approximately the size needed and sand away. This is how I deal with concave surfaces and it will conform to the surface with a little pressure.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: Cleaning old pallets and fondo
« Reply #10 on: April 28, 2025, 01:21:35 AM »

i clean off all the old glue and residue from bottom of pallets with acetone. brush it and let it sit for a minute then scrape it clean. usually not much left after that so a light sanding does the rest.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Cleaning old pallets and fondo
« Reply #11 on: April 28, 2025, 08:32:47 AM »

I also rub the bottom of the pallets on some abrasive paper glued to a ply board once I've got as much of the old glue and facing off by hand
Often I jam the tip of a screwdriver in the slot for the lever arm. Then I save a little more skin on my fingertips.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Cleaning old pallets and fondo
« Reply #12 on: April 28, 2025, 05:03:23 PM »

Thanks again. Pallets are just about ready to receive new facing now… I’m still wondering if there’s a good product for getting grime off the fondo and bare wood parts (when it just gets a bit dark like a shadow around where the pallets have sat…)
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cleaning old pallets and fondo
« Reply #13 on: April 28, 2025, 05:04:58 PM »

That shadow is a useful guide when it comes to putting the pallets back in position.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Cleaning old pallets and fondo
« Reply #14 on: April 28, 2025, 05:18:16 PM »

Good point!..
Logged
Dancing about architecture since 1997

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: Cleaning old pallets and fondo
« Reply #15 on: April 29, 2025, 10:57:11 AM »

What adhesive/s was/were used for sticking the pallet facing felt to wooden - and metal - pallets before PVA came along? I think that, these days, PVA is often suggested for the job, but I want to avoid this, because of its disadvantages: it's not reversible, it's difficult to remove entirely, and it doesn't adhere well to itself. The latter is important, should residue remain, when re-working a previously PVA-made joint.

And, whilst on the subject of adhesives, what was used for bellows tape, again before PVA? The folk who suggest PVA for this job aren't being kind to the person who next replaces the bellows tape...
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Cleaning old pallets and fondo
« Reply #16 on: April 30, 2025, 10:08:17 AM »

PVA is quite reversible afaik. Heat & water.
Why do you want it to be reversible anyway?
Similar thoughts on sticking to itself - what's the functional impact here, given that you want to flatten the pallet on a sanding board before gluing on new facings? Imho, no impact.
*update: if it's wooden, you sand, if it's metal you soak them in IPA/Acetone and remove all the glue residue before kissing them with high grit sandpaper to give them some key.

I use shoe contact glue for this job. Same that I use for gluing valves. If facings need to come off, they are destined for the bin anyway, and you sand the bottom of a pallet before gluing the new facing.

In the olden days I expect some sort of thin hide glue for wooden pallets, but it's not a good choice today. It penetrates the facing and hardens. Exact opposite of what you want.

For bellows tape it was hide glue historically. While it's easier to undo than PVA, you're still running a huge risk of permanently damaging the bellows.
« Last Edit: April 30, 2025, 10:19:40 AM by mChavez »
Logged

Toby B

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Cleaning old pallets and fondo
« Reply #17 on: April 30, 2025, 12:34:02 PM »

"In the olden days I expect some sort of thin hide glue for wooden pallets, but it's not a good choice today. It penetrates the facing and hardens. Exact opposite of what you want."

Idle curiosity ... why is that a bad thing? Hardening after penetrating? Isn't it stabilising for now and the future?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cleaning old pallets and fondo
« Reply #18 on: April 30, 2025, 12:51:01 PM »

To be practical you can use almost any glue to stick pallet facings to wooden pallets.  It doesn't need high strength or flexibility.  PVA, starch paste, hide glue etc. As long as the glues won't soak into the felt and harden it just use what you have to hand.  I wouldn't use superglue for that reason. Apply the glue only to the wood, and not direct to the felt, again to avoid hardening the felt.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Cleaning old pallets and fondo
« Reply #19 on: April 30, 2025, 01:36:47 PM »

Idle curiosity ... why is that a bad thing? Hardening after penetrating? Isn't it stabilising for now and the future?

Because the facing (and its felt padding) needs to be as supple as possible to provide the best seal around the soundhole. The harder/stiffer the facing, the more accurately you need to fit them, and even with the best fit they might not be as effective.

Fwiw, re hide glue, I suspect that the process used was to apply a very thin layer of hide glue to the wood, let it dry, then come back the next day and use a hot veneering iron to iron the facings onto the wood. That's the only method I can think of that won't kill the facing, especially on, say, bandoneons, where you have no felt - just leather on wood.
« Last Edit: April 30, 2025, 01:38:57 PM by mChavez »
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal