Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: how to fix minor bellows wear?  (Read 1763 times)

0 Members and 1 Guest are viewing this topic.

Al Cramer

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
how to fix minor bellows wear?
« on: May 04, 2025, 02:50:07 AM »

Hi all --

Am concerned about the wear on the bellows of my DG, on the bottom where it sits on my leg. Will attach a pix (hope it works! am new to this site).

This is a vintage Hohner Erica that I got from Theo a few months ago that I completely adore. I'm sure the wear wasn't visible when he shipped it. Probably caused by my pants rubbing against the tape when I play. I considered taking my pants off when I practice, but I live in New England and it's pretty cold here most of the year.

How to fix? I just ordered some black accordion bellows tape from Liberty Bellows (US source for accordion repair stuff). My plan is to cut little pieces & glue them on. Am thinking to use hide glue, because I understand it from working on violins. Please let me know if I'm on the wrong track.

Thanks!
Logged

Nigel Champion

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: how to fix minor bellows wear?
« Reply #1 on: May 04, 2025, 10:28:43 AM »

Hi Al.
"Modern" accordion bellows tapes are often much thinner than those on your vintage Erica and won't wear as well.  You may have to replace them often if the original stuff is wearing this quickly.  The bellows tapes on later Hohner pokerworks and one-rows were little more than paper!

For a similar vintage Hohner 3-row, I've bought heavier duty material (Arbelave Library buckram) from a bookbinder which is similar in thickness and durability to your original tapes.  It also has a similar texture to the original. The only difficulty is cutting it into nice straight strips of the required width: slightly wider if going over existing tape.  The strips need to be cut along not across the material as it folds more easily that way.

If you only patch those short exposed bits, you may find the patches come adrift sooner than you want.  If applying tape over the original, I'd roughen up its surface so the glue keys properly.

Good luck.
Nigel
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: how to fix minor bellows wear?
« Reply #2 on: May 04, 2025, 10:39:33 AM »

Modern Italian edging tape is as hard wearing as buckram, so should be fine. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ellisteph

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
Re: how to fix minor bellows wear?
« Reply #3 on: May 04, 2025, 05:40:02 PM »

Hi all --

Am concerned about the wear on the bellows of my DG, on the bottom where it sits on my leg. Will attach a pix (hope it works! am new to this site).

This is a vintage Hohner Erica that I got from Theo a few months ago that I completely adore. I'm sure the wear wasn't visible when he shipped it. Probably caused by my pants rubbing against the tape when I play. I considered taking my pants off when I practice, but I live in New England and it's pretty cold here most of the year.

How to fix? I just ordered some black accordion bellows tape from Liberty Bellows (US source for accordion repair stuff). My plan is to cut little pieces & glue them on. Am thinking to use hide glue, because I understand it from working on violins. Please let me know if I'm on the wrong track.

Thanks!
You're holding it wrong! Try to rest the melodeon casing  (in between the fingerboard & the bellows) on your thigh, then the bellows won't rub against your clothing .
Logged
Salterelle Connemara III, Loffet Pro C/F

Al Cramer

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
Re: how to fix minor bellows wear?
« Reply #4 on: May 04, 2025, 07:45:43 PM »

Thanks for all the tips. Any advice on what kind of glue is best?
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: how to fix minor bellows wear?
« Reply #5 on: May 05, 2025, 12:05:21 AM »

Thanks for all the tips. Any advice on what kind of glue is best?
[https://sites.google.com/view/hohnerhotrod

episode 7 of how to hotrod your hohner suggests pva . thats what i use too

that old black bellows tape on hohners can be tough to remove.....maybe start by patching it up just over the worn bits and see how you go....you can always go for the full retape at a later date if you want a proper job
Logged

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: how to fix minor bellows wear?
« Reply #6 on: May 05, 2025, 09:43:05 AM »

OK, I admit it, I've got a bee in my bonnet about adhesives. I would very much like to know what adhesive was used in, say, the 1930s, to attach bellows tape. The reason is because it was considered important to use an adhesive that allowed worn tape to be replaced relatively easily. Old tape could (usually?) be ripped off, without damaging the underlying bellows. This means that the bond itself had to fail catastrophically, and leave a surface ready to receive new adhesive. I believe that 'hide glue', or another protein-based glue, or possibly a dextrin glue would have been used. These tend to be brittle, so will give way if flexed as in ripping off tape. The glue in the tape's fold fractures or crumbles as soon as the bellows are exercised, so the glue does not stiffen up the bellows action. That's my understanding, anyway. Please correct me, if I'm mistaken.

PVA (polyvinyl acetate, not polyvinyl alcohol) is what constitutes most 'white glues', the Titebond family, Elmer's, many 'craft glues', and a whole host of general-purpose woodworking glues. It seems to be advocated for almost everything for accordion work, and is probably used by some manufacturers for bellows tape application. For the right applications, it's an excellent adhesive. It comes in many flavours, with different amounts of plasticiser and water resistance. It is a strong adhesive for absorbent substrates, and, in woodwork, typically the wood will fail before the adhesive when stressed. It also creeps under stress. It is very difficult to remove completely from absorbent substrates, because it soaks into the material. Misguided conservators have damaged ancient documents by its use. Although most PVAs can be softened and partially dissolved by water, this would obviously not be a good ploy for bellows work. It doesn't stick particularly well to itself, i.e. residue. PVA, even flexible variants, will stiffen the bellows tape folds to some extent. I could go on (my wife says I do...). For these reasons, I don't think one should use PVA for bellows tape re-working. But what should we use? Hide glue, or a relative, I suspect. PVA will certainly get the job done, but the next person who tries to remove the worn tape will curse you.
« Last Edit: May 05, 2025, 09:55:20 AM by Jerry in NZ »
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: how to fix minor bellows wear?
« Reply #7 on: May 05, 2025, 10:12:27 AM »

OK, I admit it, I've got a bee in my bonnet about adhesives. I would very much like to know what adhesive was used in, say, the 1930s, to attach bellows tape.

Hide glue.
In practice you have a problem. The bellows are made from cardboard held together with hide glue. You need heat and water to weaken the glue that holds the tape, but in doing so you mess up the cardboard and can mess up structural joints, ruining the bellows beyond repair.


Titebond is aliphatic resin, not PVA, and is often considered "yellow" glue, not "white". Very different performance and they are not substitutes.

Retaping bellows (completely) is not worth the time imho - easier to buy new ones. As an added benefit, new bellows will be airtight. I know, looking good is a lot more important, but some of us like bellows that don't leak like a sieve.

For a quick repair job, bookbinding glue (a version of PVA I believe) is the way to go.
« Last Edit: May 05, 2025, 10:19:44 AM by mChavez »
Logged

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Re: how to fix minor bellows wear?
« Reply #8 on: May 05, 2025, 10:47:02 AM »

There are so many protein-based glues (and formulations of hide glue), I wondered whether something more friendly, and weaker than hide glue had been used - gum arabic, for instance. I think Charlie Marshall sold 'pearl glue' for tape application, but exactly what it was, I don't know.

Regarding the Titebond family: their composition is not easy to discover, but the evidence I've ferreted out suggests that they are in fact PVA, modified by the addition of aliphatic resins, and isocyanates in the case of Titebond III. However, the sources are not guaranteed reliable. If you've got authoritative info, please share it! Some 'yellow glues' are thought to be no more than PVA with a dye. Adhesives are a minefield, and the manufacturers like to keep Joe Public in the dark. The info on the packets, tubes, etc. that's easily accessible has been dumbed down to kindergarten level. Wood finishes are also a mess: apparently, some big-name 'tung oil' contains no tung oil.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: how to fix minor bellows wear?
« Reply #9 on: May 05, 2025, 11:06:41 AM »

I really couldn't care less for the chemical composition. Purpose of glue is to hold two surfaces together. If it dries differently and holds the glued surfaces differently, it's a different glue.
You suggest equivalence between pva and tite and they are nothing alike when dry.

Same goes for hide glues - I really don't care what animal it came from and what was the look in its eyes when it was slaughtered - the application process between them is the same and I'm just interested in the strength of the joint.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: how to fix minor bellows wear?
« Reply #10 on: May 05, 2025, 11:36:22 AM »

I think Charlie Marshall sold 'pearl glue' for tape application, but exactly what it was, I don't know.

In the UK, pearl glue and hide glue are the same dog with different spots.  Hide glue comes in granule form, pearl glue comes as small beads or "pearls".
Logged
We're all doomed ...

Al Cramer

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
Re: how to fix minor bellows wear?
« Reply #11 on: May 05, 2025, 11:08:09 PM »

Thanks to all for glue comments. I think I'll go with PVA (if it's good enough for Lester...) There's a formulation sold in USA called "Sobo", that people use for craft, paper, and especially fabric projects. It's very flexible. Come to think of it: I used to use it years ago, when I made reeds for smallpipes!
Logged

Jerry in NZ

  • Member
  • *
  • Offline Offline
  • Posts: 13
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal