Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning a reed block  (Read 1437 times)

0 Members and 1 Guest are viewing this topic.

Thomas H Sprecher

  • New Starter
  • Offline Offline
  • Posts: 3
Tuning a reed block
« on: May 05, 2025, 04:14:33 PM »

I am in the process of restoring a 3 row Steirische diatonic made in 1923 by Andreas Steiner from Burgenland, Austria. It clearly has original markings indicating it was a C/F/Bb. After measuring the reeds (using STROBE by Peterson) at some point it was converted to Bb/Eb/Ab. My question is... how to tune a reed block that has only one air hole for both sides for root and tremolo? I don't know how to seal off one side without damaging the reed valves.

The reeds were held in place with nails and then sealed with something like shellac or varnish which was dried and cracked. I removed the old substance, cleaned, revalved and waxed them in.

Also, second question. Any pointers for tuning the large Helikon reeds?

Any help would be appreciated.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a reed block
« Reply #1 on: May 05, 2025, 04:39:05 PM »

You can isolate a single reed with masking tape over the reed and the valve beside it.  Card required when removing so as not to damage the valve.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Thomas H Sprecher

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Tuning a reed block
« Reply #2 on: May 06, 2025, 08:01:09 PM »

Thanks for the suggestion. I found a similar product called painters tape, made by Scotch, that is labelled 'Delicate Surface'. It sticks well, doesn't leave any residue and can be removed without damaging the reeds.  That will help with the tuning!

This box is very out of tune and what I can tell, seams to be around A=450. I am still in the beginning stages of learning so would it be best to tune to A=450 or retune to A=440. How far can reeds be tuned before you cause damage? Is 450 to 440 doable or am I asking for trouble.
Logged

Thomas H Sprecher

  • New Starter
  • Offline Offline
  • Posts: 3
Re: Tuning a reed block
« Reply #3 on: May 08, 2025, 06:30:44 PM »

I just discovered that the Strobe app has a setting for transpose, and it was set to 2. The box still is a C/F/Bb as was original. Now things make more sense. I'm new to this and still learning!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a reed block
« Reply #4 on: May 08, 2025, 07:38:26 PM »

Thanks for the suggestion. I found a similar product called painters tape, made by Scotch, that is labelled 'Delicate Surface'. It sticks well, doesn't leave any residue and can be removed without damaging the reeds.  That will help with the tuning!

That's more or less the same material.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Online Online
  • Posts: 2525
  • Repair and tuning in Hants
Re: Tuning a reed block
« Reply #5 on: May 10, 2025, 08:16:10 AM »

Thanks for the suggestion. I found a similar product called painters tape, made by Scotch, that is labelled 'Delicate Surface'. It sticks well, doesn't leave any residue and can be removed without damaging the reeds.  That will help with the tuning!

This box is very out of tune and what I can tell, seams to be around A=450. I am still in the beginning stages of learning so would it be best to tune to A=450 or retune to A=440. How far can reeds be tuned before you cause damage? Is 450 to 440 doable or am I asking for trouble.
If you are learning I would aim to get it in tune with itself. Altering reeds from 450 to 440 is doable but on your instrument..with the layout and oddities with the reed blocks…it would involve a lot or work (and pitfalls) and I think you would be inviting trouble.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal