Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: valve replacement on old Hohner (newbie)  (Read 2106 times)

0 Members and 2 Guests are viewing this topic.

Stephen Crawford

  • Member
  • *
  • Offline Offline
  • Posts: 18
valve replacement on old Hohner (newbie)
« on: May 05, 2025, 07:44:54 PM »

I am newbie with my very first box, a 20s/30s 31 button 16 bass Hohner in A-D-G.  It is mostly in tune and plays well enough for me to learn on.  I have mostly been working on keeping a good beat with my left hand while singing simple country songs.

I know it needs new valves.  I want to learn to do the work myself., just a bit at a time.
I pulled the pins on the bass side (see photo).  I want to stick with leather valves.

Are bass valves a different thickness than treble side? I measured them and I think I need #2, #5, and #6.
Where can I purchase them? Bossetto Accordions?
What kind of glue should I use?

So many questions!  Thanks.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: valve replacement on old Hohner (newbie)
« Reply #1 on: May 05, 2025, 08:29:11 PM »

You will find all sorts of useful info in these videos


https://www.youtube.com/playlist?list=PLDoaFL1pYKYqVmiUYp7PPU7JJYsYo34f1

Stephen Crawford

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: valve replacement on old Hohner (newbie)
« Reply #2 on: May 15, 2025, 02:21:17 PM »

This old box seems to be in good tune.  The reed plates are not waxed in; they appear to my untrained eye to be held only by washers and screws, with hooks at the top.  Should I remove a plate to replace the valves instead of trying to do it while they are in place?  Will this have an effect on the tuning?

Is liquid hide glue appropriate for this job? I have a big bottle of which I used a tiny drop to glue a stray treble button.
Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: valve replacement on old Hohner (newbie)
« Reply #3 on: May 15, 2025, 03:02:08 PM »

Replacing an inside valve in place is awkward, but a convenient shortcut if the plates are waxed in and you only want to replace 1 or 2 valves. To replace all valves, or when plates are screwed in, it is much simpler to remove the plates.
Logged

Stephen Crawford

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: valve replacement on old Hohner (newbie)
« Reply #4 on: May 16, 2025, 02:41:25 PM »

Replacing an inside valve in place is awkward, but a convenient shortcut if the plates are waxed in and you only want to replace 1 or 2 valves. To replace all valves, or when plates are screwed in, it is much simpler to remove the plates.

That is what I guessed.  Thanks.
Logged

Stephen Crawford

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: valve replacement on old Hohner (newbie)
« Reply #5 on: May 20, 2025, 09:41:08 PM »

I removed my first reed plate.  It was one where a valve was missing, so I thought I would start there. How much of an overlap should I have on the free end of the new valve?  1-2 mm?  A few of the old valves appear to be too short, not quite covering the entire opening.

And can I just scrape (gently) the old glue, or should I use a solvent?
Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: valve replacement on old Hohner (newbie)
« Reply #6 on: May 21, 2025, 02:14:22 PM »

1-2 mm should be fine. It's quite common to see too-short older valves, in a way it's not all that critical (think of the high pitched reeds that have no valve at all). For inside reeds it's good to angle the valve slightly towards the middle of the reedplate to avoid it catching the sidewall.
Logged

Stephen Crawford

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: valve replacement on old Hohner (newbie)
« Reply #7 on: June 04, 2025, 09:11:00 PM »

The new valves I ordered are not as thick as the old ones I am replacing.  Is this an issue?  I have replaced 20 or so valves and the new ones seem to work, but I feel I should ask about the thickness before I proceed with the other 200 or so.  Thanks.
Logged

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: valve replacement on old Hohner (newbie)
« Reply #8 on: June 05, 2025, 06:31:04 PM »

Older leather valves were usually thicker than those available now. It's not really an issue except for larger reeds for which 'boosters' are often fitted. People often replace treble leather valves with vinyl ones, also thinner of course, and generally less expensive.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: valve replacement on old Hohner (newbie)
« Reply #9 on: June 06, 2025, 08:17:24 PM »

It is possible to replace inner valves using tweezers, a bright light and lots of practice. Keeping the glue away from the adjacent reed, getting the valve straight and not rubbing the chamber wall are the main hurdles. Also being able to release the valve without it adhering to the tweezers.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: valve replacement on old Hohner (newbie)
« Reply #10 on: June 07, 2025, 09:37:08 AM »

Even if they are waxed, for a box this vintage, do the job properly, Remove all plates, remove all valves, clean everything, check reed gaps, glue new valves (I use shoe glue), install back onto blocks.
Don't bother with leather for trebles. Leather is only marginally better than plastic as long as it's top quality, very fresh, just the right stiffness/weight/thickness for each reed. If you don't have the experience to judge all of these 3 factors for each valve, you're better off with plastic, imho.

Pinned reeds make your job a lot easier, so you have no excuse not to overhaul, really  ;).

You're not a professional fettler who needs to do the job fast enough to keep the cash coming in to keep the kids fed - I say, take your time and learn to do things properly.
« Last Edit: June 07, 2025, 09:39:41 AM by mChavez »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: valve replacement on old Hohner (newbie)
« Reply #11 on: June 07, 2025, 10:40:02 AM »

Even if they are waxed, for a box this vintage, do the job properly, Remove all plates, remove all valves, clean everything, check reed gaps, glue new valves (I use shoe glue), install back onto blocks.
Don't bother with leather for trebles. Leather is only marginally better than plastic as long as it's top quality, very fresh, just the right stiffness/weight/thickness for each reed. If you don't have the experience to judge all of these 3 factors for each valve, you're better off with plastic, imho.

This is the best advice. Do a piecemeal job now and you will end up doing the proper job later. 

I'll just add one thought about valves. Multi-layer valves with leather and one or more layers of plastic are easier to use than plain leather and are worth using on the largest reeds where just plastic valves can be a little noisy.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: valve replacement on old Hohner (newbie)
« Reply #12 on: June 07, 2025, 11:15:36 AM »

"Multi-layer valves with leather and one or more layers of plastic"

That's exactly what I'm currently looking for, Theo! Where can I find some which are 70 x 10, please?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stephen Crawford

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: valve replacement on old Hohner (newbie)
« Reply #14 on: June 10, 2025, 05:47:31 PM »

Thanks for all the great advice. For now I want to take car of the most glaring issues while I learn to play, then get in to doing a full job down the road.  Right now I don't even know how much I don't know.
Logged

Lew Morris

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 215
Re: valve replacement on old Hohner (newbie)
« Reply #15 on: September 09, 2025, 09:07:32 AM »

BUMP

Quote
... glue new valves (I use shoe glue) ...

For the benefit of the FNG (me), could you be a bit more specific?  What is "shoe glue", I mean there are literally hundreds.

Do leather valves require a different adhesive than plastic?  I'm guessing cyanoacyrlates are taboo?

Thanks.
Logged
"It's what you learn, after you know it all, that counts." John Wooden

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: valve replacement on old Hohner (newbie)
« Reply #17 on: September 09, 2025, 12:51:57 PM »

Any contact adhesive is good for leather or plastic.  For plastic it’s a good idea to test a small number of valves.  Some brands of glue with sometimes of plastic can react and cause the valves to distort.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal